Hello @Bertrand Marquis sir,
I referref the docs and trying to build the Xen for Banana-Pi M1.
my BBfile.conf is:
# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/siddhu/Documents/yocto/sources/zeus/poky-zeus/meta \
/home/siddhu/Documents/yocto/sources/zeus/poky-zeus/meta-poky \
/home/siddhu/Documents/yocto/sources/zeus/poky-zeus/meta-yocto-bsp \
/home/siddhu/Documents/yocto/sources/zeus/meta-openembedded/meta-oe \
/home/siddhu/Documents/yocto/sources/zeus/meta-openembedded/meta-multimedia
\
/home/siddhu/Documents/yocto/sources/zeus/meta-openembedded/meta-python \
/home/siddhu/Documents/yocto/sources/zeus/meta-openembedded/meta-networking
\
/home/siddhu/Documents/yocto/sources/zeus/meta-openembedded/meta-filesystems
\
/home/siddhu/Documents/yocto/sources/zeus/meta-virtualization \
/home/siddhu/Documents/yocto/sources/zeus/meta-arm/meta-arm-autonomy \
"
and changes local.conf
MACHINE ??= "bpi-m1 " (Here I have tried multiple names for banana Pim1)
DISTRO_FEATURES += "arm-autonomy-host"
But the bitbake is not happening below I am attaching the errors may I know
what wrong I am doing here please:
for
MACHINE ??= "bpi-m1 " (Here I have tried multiple names for banana Pim1)
DISTRO_FEATURES += "arm-autonomy-host"
"
siddhu@siddhu:~/Documents/yocto/zeus/build$ bitbake
arm-autonomy-host-image-minimal
ERROR: Unable to start bitbake server (None)
ERROR: Server log for this session
(/home/siddhu/Documents/yocto/zeus/build/bitbake-cookerdaemon.log):
--- Starting bitbake server pid 9217 at 2020-05-04 16:20:46.735269 ---
ERROR: ParseError in conf/machine/bpi-m1: not a BitBake file
apart from this:
bitbake arm-autonomy-host-image-minimal
ERROR: Layer 'virtualization-layer' depends on layer 'filesystems-layer',
but this layer is not enabled in your configuration
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
siddhu@siddhu:~/Documents/yocto/zeus/build$ clear
siddhu@siddhu:~/Documents/yocto/zeus/build$ bitbake
arm-autonomy-host-image-minimal
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
Following is the list of potential problems / advisories:
MACHINE=BananaPiM1 is invalid. Please set a valid MACHINE in your
local.conf, environment or other configuration file.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
siddhu@siddhu:~/Documents/yocto/zeus/build$ bitbake
arm-autonomy-host-image-minimal
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
Following is the list of potential problems / advisories:
MACHINE=Bananapim1 is invalid. Please set a valid MACHINE in your
local.conf, environment or other configuration file.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
siddhu@siddhu:~/Documents/yocto/zeus/build$ bitbake
arm-autonomy-host-image-minimal
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
Following is the list of potential problems / advisories:
MACHINE=bananapim1 is invalid. Please set a valid MACHINE in your
local.conf, environment or other configuration file.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
siddhu@siddhu:~/Documents/yocto/zeus/build$ bitbake
arm-autonomy-host-image-minimal
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
Following is the list of potential problems / advisories:
MACHINE=BananaPim1 is invalid. Please set a valid MACHINE in your
local.conf, environment or other configuration file.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
siddhu@siddhu:~/Documents/yocto/zeus/build$ bitbake
arm-autonomy-host-image-minimal
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
Following is the list of potential problems / advisories:
MACHINE=BananaPi is invalid. Please set a valid MACHINE in your
local.conf, environment or other configuration file.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
siddhu@siddhu:~/Documents/yocto/zeus/build$ bitbake
arm-autonomy-host-image-minimal
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
Following is the list of potential problems / advisories:
MACHINE=Bananapi is invalid. Please set a valid MACHINE in your
local.conf, environment or other configuration file.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
siddhu@siddhu:~/Documents/yocto/zeus/build$
bitbake arm-autonomy-host-image-minimal
ERROR: Unable to start bitbake server (None)
ERROR: Server log for this session
(/home/siddhu/Documents/yocto/zeus/build/bitbake-cookerdaemon.log):
--- Starting bitbake server pid 9217 at 2020-05-04 16:20:46.7
*Thanks and Regards,*
*Siddhartha V*
*9972583616*
On Wed, Apr 29, 2020 at 1:33 PM Bertrand Marquis <Bertrand.Marquis@arm.com>
wrote:
>
>
> > On 29 Apr 2020, at 06:31, siddhartha v <siddhuvgowda.18695@gmail.com>
> wrote:
> >
> > Hello Sir,
> > Sorry for the late response I was bit busy yesterday.
> >
> > I tried to look into it. But I am getting the "
> > This git.yoctoproject.org page can’t be found" error.
> >
> >
>
> It seems that their certificate expired. This should be solved shortly (I
> hope).
>
> An other solution is to directly do a git clone of the layer git://
> git.yoctoproject.org/meta-arm
>
> Bertrand
>
> > May I know what should I do now.
> >
> > On Tue, Apr 28, 2020 at 1:59 PM Bertrand Marquis <
> Bertrand.Marquis@arm.com> wrote:
> > Hi Siddharha,
> >
> >> On 28 Apr 2020, at 06:20, siddhartha v <siddhuvgowda.18695@gmail.com>
> wrote:
> >>
> >> The scope of my work is to port the Xen on Banana Pi- M1
> board(Allwinner A20 dual-core SoC) with two domains. Here our target domain
> is automotive.
> >>
> >> I am trying to build the Xen using the yocto build. I am actually
> trying the xen for the first time. So i wanted to know if I am on right
> path.
> >>
> >> Do we get get any info or manual how the guest OS can be booted and
> maintained please,
> >>
> >> Any suggestion help me a lot. Thanks in advance.
> >
> > Arm published a collection yocto layers named meta-arm (
> https://git.yoctoproject.org/cgit/cgit.cgi/meta-arm/)
> >
> > There you will find the meta-arm-autonomy layer which is designed to
> help design automotive systems based on Xen on Arm.
> > Please check the meta-arm-autonomy/documentation folder for more
> information and contact me if you need help using it.
> >
> > Regards
> > Bertrand
> >
> >
> >
> > --
> > Thanks and Regards.
> > Siddhartha V.
> >
>
>
--
Thanks and Regards.
Siddhartha V.