Mailing List Archive

Issues with Brocade/Foundry and missing commands
Hi,

I've got a rancid 3.7 box and having issues with Brocade ICX 6610s and
some older FESX switches. flogin works fine and shows all the commands
being ran and dumps all data with zero issues. Soon as I run
rancid-run or rancid manually I am getting "missed cmd(s): show flash"
which is the first command, and no configs get saved obviously.

I am not sure what else to try since the commands manually show fine
with no issues. I have seen some mailing list posts about
Brocade/Foundry stopped working in later releases but then see some
that say they work fine.

Any pointers would be appreciated.

Thanks!

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss@www.shrubbery.net
https://www.shrubbery.net/mailman/listinfo/rancid-discuss
Re: Issues with Brocade/Foundry and missing commands [ In reply to ]
Do you have them as the foundry type in your router.db? I've run rancid
against netiron and turboiron boxes without issue. ICX should be the same.

Craig

On Sat, 13 Feb 2021, 23:07 Brad Bendy, <brad.bendy@gmail.com> wrote:

> Hi,
>
> I've got a rancid 3.7 box and having issues with Brocade ICX 6610s and
> some older FESX switches. flogin works fine and shows all the commands
> being ran and dumps all data with zero issues. Soon as I run
> rancid-run or rancid manually I am getting "missed cmd(s): show flash"
> which is the first command, and no configs get saved obviously.
>
> I am not sure what else to try since the commands manually show fine
> with no issues. I have seen some mailing list posts about
> Brocade/Foundry stopped working in later releases but then see some
> that say they work fine.
>
> Any pointers would be appreciated.
>
> Thanks!
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss@www.shrubbery.net
> https://www.shrubbery.net/mailman/listinfo/rancid-discuss
>
Re: Issues with Brocade/Foundry and missing commands [ In reply to ]
Yup. Tried SSH/telnet as well. It seems to me like some EOL thing not
working, but then again when flogin runs it executes all the commands
so if it was seeing EOL and the prompt it would not issue the next set
of commands.

On Sat, Feb 13, 2021 at 4:10 PM Craig Hopkins <c.o.hopkins@gmail.com> wrote:
>
> Do you have them as the foundry type in your router.db? I've run rancid against netiron and turboiron boxes without issue. ICX should be the same.
>
> Craig
>
> On Sat, 13 Feb 2021, 23:07 Brad Bendy, <brad.bendy@gmail.com> wrote:
>>
>> Hi,
>>
>> I've got a rancid 3.7 box and having issues with Brocade ICX 6610s and
>> some older FESX switches. flogin works fine and shows all the commands
>> being ran and dumps all data with zero issues. Soon as I run
>> rancid-run or rancid manually I am getting "missed cmd(s): show flash"
>> which is the first command, and no configs get saved obviously.
>>
>> I am not sure what else to try since the commands manually show fine
>> with no issues. I have seen some mailing list posts about
>> Brocade/Foundry stopped working in later releases but then see some
>> that say they work fine.
>>
>> Any pointers would be appreciated.
>>
>> Thanks!
>>
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss@www.shrubbery.net
>> https://www.shrubbery.net/mailman/listinfo/rancid-discuss

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss@www.shrubbery.net
https://www.shrubbery.net/mailman/listinfo/rancid-discuss