RANCiD 3.6 is available at
ftp://ftp.shrubbery.net/pub/rancid/rancid-3.6.0.tar.gz
The next release will be 4.0, which will no longer include support for
Compass EOS. A fix for handling of ACOS AFLEX groups that was removed
in 3.6 is a WiP for 4.0 and we need folks who can test it.
Change log contents for 3.6:
rancid.pm: ipaddrval() if IPv6 prefix length is missing, simply set 128.
*login: in_proc must be global in expect_after. had trouble reproducing
the original error, but this should be the correct fix.
xlogin: escape the * in lastprompt - Mattieu Beretti
*login: change handling of ssh key-related prompts to one line at a time
to eliminate timing-related problem.
alogin: login() eat one line at a time
a10login: remove the aflex-specific stuff. This is the wrong way to
do this and it doesn't work properly anyway.
control_rancid: create <group>/configs if it does not exist
hrancid: use rancid.pm (removes code duplication)
rancid.pm: check for existence of functions for given device type after
loading the modules for the type. return failure if any are missing.
par: add -FH options
rancid.types.conf, iosshtech.pm: Add device type ciscoshtech for
example purposes
acos.pm: filter trailing WS & recognize incomplete/invalid command
error in basicFilter()
acos.pm: filter trailing WS in ShowAflex()
acos.pm: 'show vlan' is 'show vlans' in ACOS 4.x.
acos.pm: Add cmd 'show partition-config all' for ACOS 4.x, where
'show running-config all-partitions' does not work.
acos.pm: recognize invalid cmd error in ShowRunningConfig() and filter
the config size comment
fnlogin: missing "end" to exit global mode for -[csx] - Richard Goode
plogin: add -m & -M
rancid.pm: missing variable initialization
nxos.pm: fix bug in recognizing the end of an access-list
hlogin: set tty init options when there is no controlling tty and set
set the term width to 132 when there is no controlling tty and for -[sc]
so that the hp device does not wrap lines.
ios.pm: also filter IPv6 PDP addresses - Reuben Farrelly
ios.pm: evaluation license periods are displayed differently
lg: Add show interface optics
iosxr.pm: More useless FPD messages
junos.pm: handle a transient cmd protocol failure seen in show version
control_rancid: use git ls-files instead of git status for .gitignore
and <group>/rancid.conf
fnrancid: fix formatting around removal of private-keys
bigip.pm: filter snmpv3 oscillating auth-password-encrypted
iosxr.pm: filter useless FPD upgrade message
_______________________________________________
Rancid-announce mailing list
Rancid-announce@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-announce
ftp://ftp.shrubbery.net/pub/rancid/rancid-3.6.0.tar.gz
The next release will be 4.0, which will no longer include support for
Compass EOS. A fix for handling of ACOS AFLEX groups that was removed
in 3.6 is a WiP for 4.0 and we need folks who can test it.
Change log contents for 3.6:
rancid.pm: ipaddrval() if IPv6 prefix length is missing, simply set 128.
*login: in_proc must be global in expect_after. had trouble reproducing
the original error, but this should be the correct fix.
xlogin: escape the * in lastprompt - Mattieu Beretti
*login: change handling of ssh key-related prompts to one line at a time
to eliminate timing-related problem.
alogin: login() eat one line at a time
a10login: remove the aflex-specific stuff. This is the wrong way to
do this and it doesn't work properly anyway.
control_rancid: create <group>/configs if it does not exist
hrancid: use rancid.pm (removes code duplication)
rancid.pm: check for existence of functions for given device type after
loading the modules for the type. return failure if any are missing.
par: add -FH options
rancid.types.conf, iosshtech.pm: Add device type ciscoshtech for
example purposes
acos.pm: filter trailing WS & recognize incomplete/invalid command
error in basicFilter()
acos.pm: filter trailing WS in ShowAflex()
acos.pm: 'show vlan' is 'show vlans' in ACOS 4.x.
acos.pm: Add cmd 'show partition-config all' for ACOS 4.x, where
'show running-config all-partitions' does not work.
acos.pm: recognize invalid cmd error in ShowRunningConfig() and filter
the config size comment
fnlogin: missing "end" to exit global mode for -[csx] - Richard Goode
plogin: add -m & -M
rancid.pm: missing variable initialization
nxos.pm: fix bug in recognizing the end of an access-list
hlogin: set tty init options when there is no controlling tty and set
set the term width to 132 when there is no controlling tty and for -[sc]
so that the hp device does not wrap lines.
ios.pm: also filter IPv6 PDP addresses - Reuben Farrelly
ios.pm: evaluation license periods are displayed differently
lg: Add show interface optics
iosxr.pm: More useless FPD messages
junos.pm: handle a transient cmd protocol failure seen in show version
control_rancid: use git ls-files instead of git status for .gitignore
and <group>/rancid.conf
fnrancid: fix formatting around removal of private-keys
bigip.pm: filter snmpv3 oscillating auth-password-encrypted
iosxr.pm: filter useless FPD upgrade message
_______________________________________________
Rancid-announce mailing list
Rancid-announce@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-announce