Mailing List Archive

Zebra config file parser error....
# vtysh
router> en
router# conf t
router(configure)# int lo
router(conf-if)# ip addr 1.2.3.4/32 label lo:1
router(conf-if)# exit
router# write mem
Building Configuration...
Configuration saved to /etc/quagga/zebra.conf
Configuration saved to /etc/quagga/bgpd.conf
[OK]
router# quit

then service bgpd & zebra stop....

service zebra start yields:
There is no such command.
Error occurred during reading below line.
ip address 216.220.25.8/32 secondary label lo:1

zebra startup failed

Obviously this is another case where vtysh and write mem allow for
configuring something that the startup parser can't grok.

The write mem obviously succeeds, the ip address is added, and labelled as
a virtual device perfectly correctly. Just zebra on start chokes.

--
GPG/PGP --> 0xE736BD7E 5144 6A2D 977A 6651 DFBE 1462 E351 88B9 E736 BD7E