Mailing List Archive

nfx350 reboot loop!
I've tried installing 19.4R3 and 20.4R1 on an NFX350. Here is the
boot-up from 20.4R1 after the install. I'm used to seeing weird
errors from bad arguments and commands in JunOS boot up, but this
is a bit worse. Once the system is installed and it starts the
jdm container, the system reboots and goes through the whole
thing over again. Is there anything obvious that I'm missing here?

Booting `Juniper Linux'

Loading Linux ...
error: no suitable video mode found.
Booting in blind mode
i8042: No controller found
First Level Bootstrap using initramfs...
Mounting boot device LABEL=A_ROOT
Unpacking initrd.cpio.gz ....
942677 blocks
Unmount boot device LABEL=A_ROOT
Starting init
@1610674386:2021-Jan-15 01:33:06 (+00:00):ERROR:Failed to arm watchdog (watchdog device not found)
e2fsck 1.42.9 (28-Dec-2013)
@1610674387:2021-Jan-15 01:33:07 (+00:00):INFO:Switching to disk for normal boot
Switching /config/active to /config/alternate
INIT: version 2.88 booStarting udev
udevd[2435]: can not find '/etc/udev/rules.d/81-i40e-udevhelper.rules': No such file or directory

sysvinit-2.88dsf-r500.0.corei7_64
cp: '/var/platform/70-persistent-net.rules' and '/etc/udev/rules.d/70-persistent-net.rules' are the same file
Starting udev
udevd[3726]: can not find '/etc/udev/rules.d/81-i40e-udevhelper.rules': No such file or directory

starting rsyslogd ... done
INIT: Entering runlevel: 3
Starting ipmi drivers: [FAILED]
Configuring network interfaces... done.
Starting system message bus: dbus.
starting rsyslogd ... done
Mounting cgroups...Done
Starting OpenBSD Secure Shell server: sshd
done.
Starting atd: OK
starting DNS forwarder and DHCP server: dnsmasq... done.
Starting docker: [ OK ]
Loading fuse module.
Mounting fuse control filesystem.
Starting irqbalance: done
Starting ntpd: done
starting rsyslogd ... done
Starting internet superserver: xinetd.
Starting sanlock: Success
No makedumpfile found.
Starting redis-server...
No nic devices enumerated to initialize vf-pool
Failed to initialize vf-pool
Integrity check passed for hash.md5.
Starting S.M.A.R.T. daemon: smartd.
/etc/openvswitch/conf.db does not exist ... (warning).
Creating empty database /etc/openvswitch/conf.db [ OK ]
Starting ovsdb-server [ OK ]
Configuring Open vSwitch system IDs [ OK ]
Starting ovs-vswitchd [ OK ]
Enabling remote OVSDB managers [ OK ]
Enabling gre with iptables [ OK ]
grep: /var/third-party/mode_allocations.txt: No such file or directory
cat: /var/run/jdm-config/vf-pool: No such file or directory
Initialize openvswitch ...
grep: /var/third-party/mode_allocations.txt: No such file or directory
Error: Failed to read OVS_MASTER_LCORE_CPU mask from mode allocations
Starting fan control daemon: fancontrol... done.
Starting sensors logging daemon: sensord... done.
* Starting virtualization library daemon: libvirtd
stopped /usr/bin/dnsmasq (pid 4736)
Starting tcsd: TPM is not found .. skip over.
Starting crond: OK
Stopping ntpd: done
Executing application: pkg-app-junos
Initializing JUNOS Host applications
Application initialization.
Stopping internet superserver: xinetd.
Starting internet superserver: xinetd.
net.ipv4.ip_forward = 1
/bin/rpm: invalid option -- 'a'
BusyBox v1.23.2 (2020-11-17 22:19:25 PST) multi-call binary.

Usage: rpm -i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm

calling lstopo command
lstopo command successfully executed
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
interface eth0 does not exist!
Cannot find device "eth0"
net.ipv4.tcp_retries2 = 5
net.core.rmem_max = 16777216
OK
Error! Mismatch between last-known-good and current BIOS version
No last-known-good-candidate image found
bind: unrecognized service
net.netfilter.nf_conntrack_tcp_loose = 0
OK
setup_metausb..
Formatting 'metadata_usb.img', fmt=raw size=1048576
mkfs.fat 3.0.28 (2015-05-16)
* Stopping virtualization library daemon: libvirtd
* Starting virtualization library daemon: libvirtd
stopped /usr/bin/dnsmasq (pid 9714 9712)
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
interface eth0 does not exist!
Cannot find device "eth0"
modprobe: FATAL: Module srx4k_btn_drv not found.
* Stopping virtualization library daemon: libvirtd
* Starting virtualization library daemon: libvirtd
stopped /usr/bin/dnsmasq (pid 12992 12991)
Starting lcmd: [ OK ]
Error: Failed to read default cpu allocations for user VNFs from mode allocations
OK
OK
Starting jdm.init: Checking Prerequisites
jdm docker container is in Exit state, required to cleanup, please wait...
0050bdd15f79
[ OK ]
Launching jdm container 'jdm'...
grep: /var/third-party/mode_allocations.txt: No such file or directory
3b3171729d045a64b380bcd467e7cb700f5615ecae338b7f99d1fb2d7732213d

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp