Does anyone use EVPN-VXLAN in the Centrally-Routed and Bridging topology?
I have two spine switches and two leaf switches, when I use the
virtual-gateway in active / active mode in the spines, the servers
connected only in leaf1 have a large increase in IRQ's, generating
higher CPU consumption in the servers.
I did a test by deactivating spine2 and leaving only the gateway
spine1, and the IRQ was zeroed out.
Did anyone happen to go through this?
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
I have two spine switches and two leaf switches, when I use the
virtual-gateway in active / active mode in the spines, the servers
connected only in leaf1 have a large increase in IRQ's, generating
higher CPU consumption in the servers.
I did a test by deactivating spine2 and leaving only the gateway
spine1, and the IRQ was zeroed out.
Did anyone happen to go through this?
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp