Mailing List Archive

EX4300-AFO to AFI
Hi

Is it possible, and has anybody successfully tried, to convert an
EX4300-AFO to an AFI by just replacing the fan and power supply which
are both FRU items  (EX4300-FAN-AFI, JPSU-350-AC-AFI-A) or would changes
need to be made to the firmware?  Thanks.

Colin McIntyre

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
EX4300-AFO to AFI [ In reply to ]
Hi

Is it possible, or has anybody successfully tried, to convert an
EX4300-AFO to an AFI by just replacing the fan and power supply which
are both FRU items  (EX4300-FAN-AFI, JPSU-350-AC-AFI-A) or would changes
need to be made to the firmware?  Thanks.

Colin McIntyre

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: EX4300-AFO to AFI [ In reply to ]
Just swapping them out seemed to do the trick for us.

On Thu, Dec 12, 2019 at 11:19 AM Colin <mcintyrecolin21@gmail.com> wrote:

> Hi
>
> Is it possible, or has anybody successfully tried, to convert an
> EX4300-AFO to an AFI by just replacing the fan and power supply which
> are both FRU items (EX4300-FAN-AFI, JPSU-350-AC-AFI-A) or would changes
> need to be made to the firmware? Thanks.
>
> Colin McIntyre
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: EX4300-AFO to AFI [ In reply to ]
?Make sure to involve JTAC because if you have to RMA this and the Database has not been updated you might get the wrong switch back.

BR
Christian



Von meinem iPhone gesendet

> Am 12.12.2019 um 17:48 schrieb Dovid Bender <dovid@telecurve.com>:
>
> ?Just swapping them out seemed to do the trick for us.
>
>>> On Thu, Dec 12, 2019 at 11:19 AM Colin <mcintyrecolin21@gmail.com> wrote:
>> Hi
>> Is it possible, or has anybody successfully tried, to convert an
>> EX4300-AFO to an AFI by just replacing the fan and power supply which
>> are both FRU items (EX4300-FAN-AFI, JPSU-350-AC-AFI-A) or would changes
>> need to be made to the firmware? Thanks.
>> Colin McIntyre
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp