Hi all,
I have an EX4200 VC stack where a copper interface (0/8 below) has
suddenly became a VC port:
> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
vcp-0 Dedicated 2 Up 32000 1 vcp-0
vcp-1 Dedicated 1 Up 32000 1 vcp-1
0/8 Auto-Configured -1 Up 1000
fpc1:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
vcp-0 Dedicated 2 Up 32000 0 vcp-0
vcp-1 Dedicated 1 Up 32000 0 vcp-1
0/8 Auto-Configured -1 Up 1000
Does anyone know why this would happen or how to safely remove it as a
VC-port? I did find the following thread that doesn't really present a
solution/explanation:
https://forums.juniper.net/t5/Ethernet-Switching/EX3300-normal-port-suddenly-change-to-VC-Port/td-p/302245
Furthermore, it doesn't even appear that copper interfaces are supported as
VC-ports on this platform.
This VC stack is running 12.3R9.4. Any suggestions would be appreciated.
Thanks,
Josh
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
I have an EX4200 VC stack where a copper interface (0/8 below) has
suddenly became a VC port:
> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
vcp-0 Dedicated 2 Up 32000 1 vcp-0
vcp-1 Dedicated 1 Up 32000 1 vcp-1
0/8 Auto-Configured -1 Up 1000
fpc1:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
vcp-0 Dedicated 2 Up 32000 0 vcp-0
vcp-1 Dedicated 1 Up 32000 0 vcp-1
0/8 Auto-Configured -1 Up 1000
Does anyone know why this would happen or how to safely remove it as a
VC-port? I did find the following thread that doesn't really present a
solution/explanation:
https://forums.juniper.net/t5/Ethernet-Switching/EX3300-normal-port-suddenly-change-to-VC-Port/td-p/302245
Furthermore, it doesn't even appear that copper interfaces are supported as
VC-ports on this platform.
This VC stack is running 12.3R9.4. Any suggestions would be appreciated.
Thanks,
Josh
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp