Hello
I am having trouble with subscriber management not inserting any routes.
Information is picked up from radius, such as this:
baldur@interxion-edge1> show subscribers
Interface IP Address/VLAN ID User
Name LS:RI
demux0.3221225472 195.192.249.104 vlan.1970-37
default:internet
demux0.3221225473 195.192.249.69 vlan.1970-77
default:internet
...
baldur@interxion-edge1> show interfaces demux0.3221225472
Logical interface demux0.3221225472 (Index 536870919) (SNMP ifIndex
200000007)
Flags: Up VLAN-Tag [ 0x8100.1970 0x8100.37 ] Encapsulation: ENET2
Demux:
Underlying interface: xe-0/1/1 (Index 168)
Bandwidth: 0
Input packets : 3342925
Output packets: 0
Protocol inet, MTU: 1500
Max nh cache: 0, New hold nh limit: 0, Curr nh cnt: 0, Curr new
hold cnt: 0, NH drop cnt: 0
Flags: Unnumbered
Donor interface: lo0.1 (Index 329)
Addresses, Flags: Is-Primary
Local: 185.24.168.248
baldur@interxion-edge1> show route 195.192.249.104
internet.inet.0: 769284 destinations, 771001 routes (769284 active, 0
holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
195.192.249.64/26 *[BGP/170] 4w5d 12:58:36, MED 0, localpref 100, from
185.24.171.254
AS path: ?, validation-state: unverified
> to 10.10.124.2 via xe-0/1/0.0, Push 164140, Push
16467(top)
---
The subscriber interface is receiving packets but never sends anything
out. Also no route is added although the router seems to be aware of the
intended subscriber IP address. The route shown above is a /26 to
another router. I am expecting the subscriber management system to
override that with a /32 for this specific subscriber.
My setup is like this:
interfaces {
xe-0/1/1 {
flexible-vlan-tagging;
auto-configure {
stacked-vlan-ranges {
dynamic-profile Auto-VLAN-Demux {
accept inet;
ranges {
1970-1970,any;
}
access-profile prof1;
}
authentication {
password "$ABC123";
username-include {
user-prefix vlan;
vlan-tags;
}
}
access-profile prof1;
}
}
}
}
dynamic-profiles {
Auto-VLAN-Demux {
routing-instances {
"$junos-routing-instance" {
interface "$junos-interface-name";
}
}
interfaces {
demux0 {
unit "$junos-interface-unit" {
demux-source inet;
demux {
inet {
address source;
auto-configure {
address-ranges {
dynamic-profile DHCP-IP-Demux {
network 0.0.0.0/0;
}
authentication {
password ABC123;
username-include {
user-prefix ip;
interface-name;
source-address;
}
}
}
}
}
}
vlan-tags outer "$junos-stacked-vlan-id" inner
"$junos-vlan-id";
demux-options {
underlying-interface "$junos-underlying-interface";
}
family inet {
unnumbered-address lo0.1;
}
}
}
}
}
}
---
What am I missing here? I have tried a ton of stuff but never succeeded
in getting any outgoing packets towards the subscriber.
Regards,
Baldur
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
I am having trouble with subscriber management not inserting any routes.
Information is picked up from radius, such as this:
baldur@interxion-edge1> show subscribers
Interface IP Address/VLAN ID User
Name LS:RI
demux0.3221225472 195.192.249.104 vlan.1970-37
default:internet
demux0.3221225473 195.192.249.69 vlan.1970-77
default:internet
...
baldur@interxion-edge1> show interfaces demux0.3221225472
Logical interface demux0.3221225472 (Index 536870919) (SNMP ifIndex
200000007)
Flags: Up VLAN-Tag [ 0x8100.1970 0x8100.37 ] Encapsulation: ENET2
Demux:
Underlying interface: xe-0/1/1 (Index 168)
Bandwidth: 0
Input packets : 3342925
Output packets: 0
Protocol inet, MTU: 1500
Max nh cache: 0, New hold nh limit: 0, Curr nh cnt: 0, Curr new
hold cnt: 0, NH drop cnt: 0
Flags: Unnumbered
Donor interface: lo0.1 (Index 329)
Addresses, Flags: Is-Primary
Local: 185.24.168.248
baldur@interxion-edge1> show route 195.192.249.104
internet.inet.0: 769284 destinations, 771001 routes (769284 active, 0
holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
195.192.249.64/26 *[BGP/170] 4w5d 12:58:36, MED 0, localpref 100, from
185.24.171.254
AS path: ?, validation-state: unverified
> to 10.10.124.2 via xe-0/1/0.0, Push 164140, Push
16467(top)
---
The subscriber interface is receiving packets but never sends anything
out. Also no route is added although the router seems to be aware of the
intended subscriber IP address. The route shown above is a /26 to
another router. I am expecting the subscriber management system to
override that with a /32 for this specific subscriber.
My setup is like this:
interfaces {
xe-0/1/1 {
flexible-vlan-tagging;
auto-configure {
stacked-vlan-ranges {
dynamic-profile Auto-VLAN-Demux {
accept inet;
ranges {
1970-1970,any;
}
access-profile prof1;
}
authentication {
password "$ABC123";
username-include {
user-prefix vlan;
vlan-tags;
}
}
access-profile prof1;
}
}
}
}
dynamic-profiles {
Auto-VLAN-Demux {
routing-instances {
"$junos-routing-instance" {
interface "$junos-interface-name";
}
}
interfaces {
demux0 {
unit "$junos-interface-unit" {
demux-source inet;
demux {
inet {
address source;
auto-configure {
address-ranges {
dynamic-profile DHCP-IP-Demux {
network 0.0.0.0/0;
}
authentication {
password ABC123;
username-include {
user-prefix ip;
interface-name;
source-address;
}
}
}
}
}
}
vlan-tags outer "$junos-stacked-vlan-id" inner
"$junos-vlan-id";
demux-options {
underlying-interface "$junos-underlying-interface";
}
family inet {
unnumbered-address lo0.1;
}
}
}
}
}
}
---
What am I missing here? I have tried a ton of stuff but never succeeded
in getting any outgoing packets towards the subscriber.
Regards,
Baldur
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp