Mailing List Archive

MX150 10G Configuration
All,

I'm in an MX150 for the first time today and I can't figure out how to
determine what the 10g numbering is in the OS. The front panel labels
suggest 10g ports are on a separate PIC but show chassis hardware doesn't
indicate as much. I haven't plugged SFPs in and show chassis hardware
output is limited to FPC0, MIC 0, PIC 0. No other inventory.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: MX150 10G Configuration [ In reply to ]
Jason Iannone wrote on 16/05/2019 19:33:
> I'm in an MX150 for the first time today and I can't figure out how to
> determine what the 10g numbering is in the OS.

They're xe-0/0/12 and xe-0/0/13.

When populated, they look like this under show chassis hardware:

FPC 0 Virtual FPC
MIC 0 Virtual
PIC 0 BUILTIN BUILTIN Virtual
Xcvr 12 1310nm 740-021309 F78R45Q SFP+-10G-LR
Xcvr 13 DWDM30 740-030128 F78M0V6 SFP+-10G-ER


I have some vague recollection of stumbling over this too ;-)


- Barry


_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp