You can do GRE on GSRs, you just have to dedicate a whole Engine 2 OC48
card to act as a tunnel server card (cannot use it as an oc48 card at
the same time)...
On Tue, 20 May 2003, Link King wrote:
> Date: Tue, 20 May 2003 05:02:59 -0700 (MST)
> From: Link King <king@kinger.net>
> To: Dmitri Kalintsev <dek@hades.uz>
> Subject: Re: [j-nsp] Juniper <-> Cisco GRE
> Resent-Date: Tue, 20 May 2003 07:19:26 -0700 (MST)
> Resent-From: Link King <king@kinger.net>
> Resent-To: juniper-nsp@puck.nether.net
> Resent-Subject: Re: [j-nsp] Juniper <-> Cisco GRE
>
>
> Nope. Have the tunnel services PIC and the Cisco's aren't GSR's.
>
> -Link
>
> > Hope you're not forgetting the need for a tunnel service PIC on a Juniper
> > side and inability to do tunnels on Cisco side if your Cisco is GSR?
> >
> > I'm talking about tunnel for actual pass-through (not RE-generated) traffic,
> > in both (Cisco & Juniper) cases, of course.
> >
> > On Mon, May 19, 2003 at 01:47:28PM -0700, Link King wrote:
> > >
> > > Anyone have a simple/handy configuration example for setting up a GRE
> > > tunnel between a Juniper and a Cisco router?
> > >
> > > Link King
> > > king@kinger.net
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp@puck.nether.net
> > > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > ---end quoted text---
> >
> > SY,
> > --
> > D.K.
> >
>
> Link King
> king@kinger.net
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
--
-sean
Spoon!