Mailing List Archive

Rate Limiting base on SCU and DCU
Hi all,
Anyone try to configure rate limiting base on SCU and DCU ?
what is the differential between source-class and source-class-except ?
Is the source-class-except mean it will accept the class that I have define
?
When I do the testing using TCP and UDP, seem like TCP work according to the
rate limit but for UDP will drop immediately and connection lose.


Regards,
Yong Kooi Peng
Network Engineer
Nera Telecommunications Ltd
109 Defu Lane 10
Singapore 539225
DID : 65-63800320
Fax : 65-63839566/65-63839577
HP : 65-98266202
Email : yongkp@neratel.com.sg
Rate Limiting base on SCU and DCU [ In reply to ]
Hi Daryl,
Thanks for your reply.
Yong
----- Original Message -----
From: "Wan Wai Meng Daryl NCS" <darylwan@ncs.com.sg>
To: <Kooi-Peng_Yong@neratel.com.sg>; <juniper-nsp@puck.nether.net>
Sent: Thursday, January 23, 2003 8:17 PM
Subject: RE: [j-nsp] Rate Limiting base on SCU and DCU


>
>
> Hi there,
>
> >Anyone try to configure rate limiting base on SCU and DCU ?
> Yes, it works. No problem at all.
>
> >what is the differential between source-class and source-class-except ?
> source-class Match source class
> source-class-except Do not match source class
>
> >Is the source-class-except mean it will accept the class that I have
> define?
> It is totally opposite of what you just stated.
>
> >When I do the testing using TCP and UDP, seem like TCP work according to
> the
> >rate limit but for UDP will drop immediately and connection lose.
> No problem when i test TCP or UDP using Smartbits.
>
>
>
> Regards,
>
>
> Daryl Wan
> CCIE #7261, JNCIS-M
>
Rate Limiting base on SCU and DCU [ In reply to ]
Hi there,

>Anyone try to configure rate limiting base on SCU and DCU ?
Yes, it works. No problem at all.

>what is the differential between source-class and source-class-except ?
source-class Match source class
source-class-except Do not match source class

>Is the source-class-except mean it will accept the class that I have
define?
It is totally opposite of what you just stated.

>When I do the testing using TCP and UDP, seem like TCP work according to
the
>rate limit but for UDP will drop immediately and connection lose.
No problem when i test TCP or UDP using Smartbits.



Regards,


Daryl Wan
CCIE #7261, JNCIS-M