I'm having an odd problem routing IPv6 traffic through an MX-960 I'm
testing. I'm sending traffic from a directly connected host through the
Juniper box to be routed out to the Internet. I can ping the address on
the MX from the downstream router, but can't seem to route *through* the
Juniper.
One thing that may be pertinent is that the next-hop I expect the
traffic should take is on the other end of a 6in4 tunnel.
Any ideas?
Cheers,
jonathan
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
testing. I'm sending traffic from a directly connected host through the
Juniper box to be routed out to the Internet. I can ping the address on
the MX from the downstream router, but can't seem to route *through* the
Juniper.
One thing that may be pertinent is that the next-hop I expect the
traffic should take is on the other end of a 6in4 tunnel.
Any ideas?
Cheers,
jonathan
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp