Mailing List Archive: Showing optical values on FastIron 07.3.00h

Showing optical values on FastIron 07.3.00h

Oct 8, 2019, 2:07 AM

Post #1 of 3 (1163 views)

Hello,

is there any "hidden" command e.g. on 07.3.00h for printing out optical
values, when a link is not fully connected?

For example, using the same vendor optic between sites A and B, B shows
no TX,RX at all.

A:

# show optic 11
Port Temperature Tx Power Rx Power Tx Bias Current
+----+-----------+----------+------------+-------------------+
11 52.3906 C 000.8022 dBm -011.5676 dBm 30.178 mA
Normal Normal Normal Normal

# show interfaces ethernet 11 | include up
10GigabitEthernet11 is up, line protocol is up
Configured speed 10Gbit, actual 10Gbit, configured duplex fdx, actual
fdx

But site B:

# show interfaces ethernet 11 | include line
10GigabitEthernet11 is down, line protocol is down

#show optic 11
# (empty line)

Regards

Jörg
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp

Re: Showing optical values on FastIron 07.3.00h [ In reply to ]

timoid at timoid

Oct 8, 2019, 2:14 AM

Post #2 of 3 (1163 views)

Permalink

What does a show media look like?

A looped on itself? B the wrong port?

> -----Original Message-----
> From: foundry-nsp [mailto:foundry-nsp-bounces@puck.nether.net] On
> Behalf Of Jörg Kost
> Sent: Tuesday, 8 October 2019 7:07 PM
> To: foundry-nsp <foundry-nsp@puck.nether.net>
> Subject: [f-nsp] Showing optical values on FastIron 07.3.00h
>
> Hello,
>
> is there any "hidden" command e.g. on 07.3.00h for printing out optical
> values, when a link is not fully connected?
>
> For example, using the same vendor optic between sites A and B, B shows
> no TX,RX at all.
>
> A:
>
> # show optic 11
> Port Temperature Tx Power Rx Power Tx Bias Current
> +----+-----------+----------+------------+-------------------+
> 11 52.3906 C 000.8022 dBm -011.5676 dBm 30.178 mA
> Normal Normal Normal Normal
>
> # show interfaces ethernet 11 | include up
> 10GigabitEthernet11 is up, line protocol is up
> Configured speed 10Gbit, actual 10Gbit, configured duplex fdx, actual
> fdx
>
> But site B:
>
> # show interfaces ethernet 11 | include line
> 10GigabitEthernet11 is down, line protocol is down
>
> #show optic 11
> # (empty line)
>
> Regards
>
> Jörg
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp

Re: Showing optical values on FastIron 07.3.00h [ In reply to ]

jk at ip-clear

Oct 8, 2019, 2:40 AM

Post #3 of 3 (1163 views)

Permalink

Hello Tim,

thanks for follow-up, someone whispered me a working solution by private mail.

debug system optics

will open up the show-command for not-connected links also:

# show optic 11
Port Temperature Tx Power Rx Power Tx Bias Current
+----+-----------+----------+------------+-------------------+
11 47.0078 C 001.8187 dBm -020.7058 dBm 30.200 mA
Normal Normal Low-Alarm Normal

From here on, I will escalate this locally.

Regards
Jörg

On 8 Oct 2019, at 11:14, Tim Warnock wrote:

> What does a show media look like?
>
> A looped on itself? B the wrong port?
>
>> -----Original Message-----
>> From: foundry-nsp [mailto:foundry-nsp-bounces@puck.nether.net] On
>> Behalf Of Jörg Kost
>> Sent: Tuesday, 8 October 2019 7:07 PM
>> To: foundry-nsp <foundry-nsp@puck.nether.net>
>> Subject: [f-nsp] Showing optical values on FastIron 07.3.00h
>>
>> Hello,
>>
>> is there any "hidden" command e.g. on 07.3.00h for printing out optical
>> values, when a link is not fully connected?
>>
>> For example, using the same vendor optic between sites A and B, B shows
>> no TX,RX at all.
>>
>> A:
>>
>> # show optic 11
>> Port Temperature Tx Power Rx Power Tx Bias Current
>> +----+-----------+----------+------------+-------------------+
>> 11 52.3906 C 000.8022 dBm -011.5676 dBm 30.178 mA
>> Normal Normal Normal Normal
>>
>> # show interfaces ethernet 11 | include up
>> 10GigabitEthernet11 is up, line protocol is up
>> Configured speed 10Gbit, actual 10Gbit, configured duplex fdx, actual
>> fdx
>>
>> But site B:
>>
>> # show interfaces ethernet 11 | include line
>> 10GigabitEsomthernet11 is down, line protocol is down
>>
>> #show optic 11
>> # (empty line)
>>
>> Regards
>>
>> Jörg
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp@puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp