Hi,
Anyone had experience with the SPS image?
We decided to drop back to 0803x due to issue with our stack of 8,
where "username ..." and "enable telnet authen..." where not included
into the running-config after a power outage.
( Yes they are in the startup-config (aka: show conf) )
Curiously that issue do not happen on the stack of 2.
PS: And that's beside the watchdog timing out (~5m) waiting to
unmount the USB device that is either not mounted and not even
connected, when doing a reload on any of them.
-----
Alain Hebert ahebert@pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
On 01/16/17 07:59, Alain Hebert wrote:
>
> Anyone has experience with EPS 4000, a DC power solution for the ICX.
>
> A stack of 12 ICX 7250 and 2 EPS 4000, used, appear in our loading
> bay, now we're looking to make something out of it =D.
>
> We cannot find any sort of documentation in Brocade, beside basic
> installation instruction in ICX documentation, nor any sign of
> firmware release.
>
> Everything seems to be working but for the EPS not providing DC
> current and looking to download EPS4000.hex from a TFTP server
> provided by DHCP.
>
> Also the EPS4k do not seems to have any firmware loaded beside the
> basic rommon.
>
> --
> -----
> Alain Hebertahebert@pubnix.net
> PubNIX Inc.
> 50 boul. St-Charles
> P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
> Tel: 514-990-5911http://www.pubnix.net Fax: 514-990-9443
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
Anyone had experience with the SPS image?
We decided to drop back to 0803x due to issue with our stack of 8,
where "username ..." and "enable telnet authen..." where not included
into the running-config after a power outage.
( Yes they are in the startup-config (aka: show conf) )
Curiously that issue do not happen on the stack of 2.
PS: And that's beside the watchdog timing out (~5m) waiting to
unmount the USB device that is either not mounted and not even
connected, when doing a reload on any of them.
-----
Alain Hebert ahebert@pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
On 01/16/17 07:59, Alain Hebert wrote:
>
> Anyone has experience with EPS 4000, a DC power solution for the ICX.
>
> A stack of 12 ICX 7250 and 2 EPS 4000, used, appear in our loading
> bay, now we're looking to make something out of it =D.
>
> We cannot find any sort of documentation in Brocade, beside basic
> installation instruction in ICX documentation, nor any sign of
> firmware release.
>
> Everything seems to be working but for the EPS not providing DC
> current and looking to download EPS4000.hex from a TFTP server
> provided by DHCP.
>
> Also the EPS4k do not seems to have any firmware loaded beside the
> basic rommon.
>
> --
> -----
> Alain Hebertahebert@pubnix.net
> PubNIX Inc.
> 50 boul. St-Charles
> P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
> Tel: 514-990-5911http://www.pubnix.net Fax: 514-990-9443
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp