Hi,
Any one know how to show Layer-3 VLAN interface traffic?
For physical interface (no matter it is Layer-2, Layer-3 or
port-channel), we can use such as "show interface ten 0/1" to see the
bandwidth usage of the interface (bit per second).
But "show interface vlan xxx" does not have bit per second information
like what we can get from Cisco switch.
Is there any command can display a Layer-3 VLAN interface bandwidth
usage on a force10 switch? (specifically a S4810 switch.)
Thanks in advance,
--
Michel~
_______________________________________________
force10-nsp mailing list
force10-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/force10-nsp
Any one know how to show Layer-3 VLAN interface traffic?
For physical interface (no matter it is Layer-2, Layer-3 or
port-channel), we can use such as "show interface ten 0/1" to see the
bandwidth usage of the interface (bit per second).
But "show interface vlan xxx" does not have bit per second information
like what we can get from Cisco switch.
Is there any command can display a Layer-3 VLAN interface bandwidth
usage on a force10 switch? (specifically a S4810 switch.)
Thanks in advance,
--
Michel~
_______________________________________________
force10-nsp mailing list
force10-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/force10-nsp