Mailing List Archive

7-mode upgrade mismatch
I have a 3240 cluster with node A running 8.2.5P5 and node B running
8.1.4P9. Node A was upgraded to 8.2.5P5 and giveback was performed from
node B. Takeover of node B by node A was performed, and both nodes are now
running on node A. But, node B was not upgraded to 8.2.5P5 before the
takeover and now when we attempt to giveback to node B so that it can be
upgraded, it panics.

So, node A running 8.2.5P5 in takeover mode. Node B running 8.1.4P9 has
been taken over by A. How can we get B upgraded to 8.2.5P5?

Thanks,

--Carl
Re: 7-mode upgrade mismatch [ In reply to ]
Probably the best thing to do is call support ????

If I were to try something I would not the node to the bot menu. I think there is an option to install software.

Been a while. I may be wrong

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: Toasters <toasters-bounces@teaparty.net> on behalf of Carl Howell <chowell@uwf.edu>
Sent: Thursday, February 4, 2021 8:21 AM
To: toasters@teaparty.net
Subject: 7-mode upgrade mismatch

I have a 3240 cluster with node A running 8.2.5P5 and node B running 8.1.4P9. Node A was upgraded to 8.2.5P5 and giveback was performed from node B. Takeover of node B by node A was performed, and both nodes are now running on node A. But, node B was not upgraded to 8.2.5P5 before the takeover and now when we attempt to giveback to node B so that it can be upgraded, it panics.

So, node A running 8.2.5P5 in takeover mode. Node B running 8.1.4P9 has been taken over by A. How can we get B upgraded to 8.2.5P5?

Thanks,

--Carl
RE: 7-mode upgrade mismatch [ In reply to ]
I was in this situation once on 7G. I simply netboot correct version on B. Comparing with C-Mode netboot on 7-Mode is fully functional. Then I was able to giveback and install correct version on boot medium.

B panics because disk labels were already converted.


---
Sent from my Fujitsu LIFEBOOK S937
With best regards
Andrei Borzenkov
Senior System Engineer
FJ EMEIA PR FOCP RU SM FSO
[cid:image004.gif@01CEE08A.195DCF10]
FUJITSU
Savvinskaja river bank, bld 11, floor 6,
BC “Savvinskaja 11”, 119435,
Moscow, Russia
Tel.: +7 (495) 730 6220 ext. 2247
Mob.: +7 (916) 678 7208
E-mail: Andrei.Borzenkov@fujitsu.com
Web: ts.fujitsu.com<http://ts.fujitsu.com/>
Company details: OOO Fujitsu Technology Solutions / ts.fujitsu.com/imprint<http://ts.fujitsu.com/imprint.html>
This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.
Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.

From: Toasters <toasters-bounces@teaparty.net> On Behalf Of Carl Howell
Sent: Thursday, February 4, 2021 4:18 PM
To: toasters@teaparty.net
Subject: 7-mode upgrade mismatch

I have a 3240 cluster with node A running 8.2.5P5 and node B running 8.1.4P9. Node A was upgraded to 8.2.5P5 and giveback was performed from node B. Takeover of node B by node A was performed, and both nodes are now running on node A. But, node B was not upgraded to 8.2.5P5 before the takeover and now when we attempt to giveback to node B so that it can be upgraded, it panics.

So, node A running 8.2.5P5 in takeover mode. Node B running 8.1.4P9 has been taken over by A. How can we get B upgraded to 8.2.5P5?

Thanks,

--Carl
RE: 7-mode upgrade mismatch [ In reply to ]
Actually it is probably more fool proof approach – just pretend you are replacing boot medium and follow procedure. 7G and Data ONTAP 8 are sufficiently different, what with extra /var and so on, so netbot may not function as it did before.


---
Sent from my Fujitsu LIFEBOOK S937
With best regards
Andrei Borzenkov
Senior System Engineer
FJ EMEIA PR FOCP RU SM FSO
[cid:image004.gif@01CEE08A.195DCF10]
FUJITSU
Savvinskaja river bank, bld 11, floor 6,
BC “Savvinskaja 11”, 119435,
Moscow, Russia
Tel.: +7 (495) 730 6220 ext. 2247
Mob.: +7 (916) 678 7208
E-mail: Andrei.Borzenkov@fujitsu.com
Web: ts.fujitsu.com<http://ts.fujitsu.com/>
Company details: OOO Fujitsu Technology Solutions / ts.fujitsu.com/imprint<http://ts.fujitsu.com/imprint.html>
This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.
Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.

From: Toasters <toasters-bounces@teaparty.net> On Behalf Of Tim McCarthy
Sent: Thursday, February 4, 2021 4:24 PM
To: Carl Howell <chowell@uwf.edu>; toasters@teaparty.net
Subject: Re: 7-mode upgrade mismatch

Probably the best thing to do is call support ????

If I were to try something I would not the node to the bot menu. I think there is an option to install software.

Been a while. I may be wrong

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Carl Howell <chowell@uwf.edu<mailto:chowell@uwf.edu>>
Sent: Thursday, February 4, 2021 8:21 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: 7-mode upgrade mismatch

I have a 3240 cluster with node A running 8.2.5P5 and node B running 8.1.4P9. Node A was upgraded to 8.2.5P5 and giveback was performed from node B. Takeover of node B by node A was performed, and both nodes are now running on node A. But, node B was not upgraded to 8.2.5P5 before the takeover and now when we attempt to giveback to node B so that it can be upgraded, it panics.

So, node A running 8.2.5P5 in takeover mode. Node B running 8.1.4P9 has been taken over by A. How can we get B upgraded to 8.2.5P5?

Thanks,

--Carl
Re: 7-mode upgrade mismatch [ In reply to ]
I didn?t say NetBoot. That is different (but may still work)

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: andrei.borzenkov@fujitsu.com <andrei.borzenkov@fujitsu.com>
Sent: Thursday, February 4, 2021 8:29:44 AM
To: Tim McCarthy <tmacmd@gmail.com>; Carl Howell <chowell@uwf.edu>; toasters@teaparty.net <toasters@teaparty.net>
Subject: RE: 7-mode upgrade mismatch


Actually it is probably more fool proof approach ? just pretend you are replacing boot medium and follow procedure. 7G and Data ONTAP 8 are sufficiently different, what with extra /var and so on, so netbot may not function as it did before.





---

Sent from my Fujitsu LIFEBOOK S937

With best regards

Andrei Borzenkov

Senior System Engineer

FJ EMEIA PR FOCP RU SM FSO

[cid:image004.gif@01CEE08A.195DCF10]

FUJITSU

Savvinskaja river bank, bld 11, floor 6,

BC ?Savvinskaja 11?, 119435,

Moscow, Russia

Tel.: +7 (495) 730 6220 ext. 2247

Mob.: +7 (916) 678 7208

E-mail: Andrei.Borzenkov@fujitsu.com

Web: ts.fujitsu.com<http://ts.fujitsu.com/>

Company details: OOO Fujitsu Technology Solutions / ts.fujitsu.com/imprint<http://ts.fujitsu.com/imprint.html>

This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.

Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.



From: Toasters <toasters-bounces@teaparty.net> On Behalf Of Tim McCarthy
Sent: Thursday, February 4, 2021 4:24 PM
To: Carl Howell <chowell@uwf.edu>; toasters@teaparty.net
Subject: Re: 7-mode upgrade mismatch



Probably the best thing to do is call support ??



If I were to try something I would not the node to the bot menu. I think there is an option to install software.



Been a while. I may be wrong



Get Outlook for iOS<https://aka.ms/o0ukef>

________________________________

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Carl Howell <chowell@uwf.edu<mailto:chowell@uwf.edu>>
Sent: Thursday, February 4, 2021 8:21 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: 7-mode upgrade mismatch



I have a 3240 cluster with node A running 8.2.5P5 and node B running 8.1.4P9. Node A was upgraded to 8.2.5P5 and giveback was performed from node B. Takeover of node B by node A was performed, and both nodes are now running on node A. But, node B was not upgraded to 8.2.5P5 before the takeover and now when we attempt to giveback to node B so that it can be upgraded, it panics.



So, node A running 8.2.5P5 in takeover mode. Node B running 8.1.4P9 has been taken over by A. How can we get B upgraded to 8.2.5P5?



Thanks,



--Carl
RE: 7-mode upgrade mismatch [ In reply to ]
I know you did not mean netboot and that is what I said – option to install software effectively wipes out boot medium so that you need to follow procedure to replace it (to restore configuration information). 7G was easier in this respect as everything was on vol0/root aggregate.


---
Sent from my Fujitsu LIFEBOOK S937
With best regards
Andrei Borzenkov
Senior System Engineer
FJ EMEIA PR FOCP RU SM FSO
[cid:image004.gif@01CEE08A.195DCF10]
FUJITSU
Savvinskaja river bank, bld 11, floor 6,
BC “Savvinskaja 11”, 119435,
Moscow, Russia
Tel.: +7 (495) 730 6220 ext. 2247
Mob.: +7 (916) 678 7208
E-mail: Andrei.Borzenkov@fujitsu.com
Web: ts.fujitsu.com<http://ts.fujitsu.com/>
Company details: OOO Fujitsu Technology Solutions / ts.fujitsu.com/imprint<http://ts.fujitsu.com/imprint.html>
This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.
Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.

From: Tim McCarthy <tmacmd@gmail.com>
Sent: Thursday, February 4, 2021 4:31 PM
To: Borzenkov, Andrei <andrei.borzenkov@fujitsu.com>; Carl Howell <chowell@uwf.edu>; toasters@teaparty.net
Subject: Re: 7-mode upgrade mismatch

I didn’t say NetBoot. That is different (but may still work)

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: andrei.borzenkov@fujitsu.com<mailto:andrei.borzenkov@fujitsu.com> <andrei.borzenkov@fujitsu.com<mailto:andrei.borzenkov@fujitsu.com>>
Sent: Thursday, February 4, 2021 8:29:44 AM
To: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; Carl Howell <chowell@uwf.edu<mailto:chowell@uwf.edu>>; toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: 7-mode upgrade mismatch


Actually it is probably more fool proof approach – just pretend you are replacing boot medium and follow procedure. 7G and Data ONTAP 8 are sufficiently different, what with extra /var and so on, so netbot may not function as it did before.





---

Sent from my Fujitsu LIFEBOOK S937

With best regards

Andrei Borzenkov

Senior System Engineer

FJ EMEIA PR FOCP RU SM FSO

[cid:image004.gif@01CEE08A.195DCF10]

FUJITSU

Savvinskaja river bank, bld 11, floor 6,

BC “Savvinskaja 11”, 119435,

Moscow, Russia

Tel.: +7 (495) 730 6220 ext. 2247

Mob.: +7 (916) 678 7208

E-mail: Andrei.Borzenkov@fujitsu.com<mailto:Andrei.Borzenkov@fujitsu.com>

Web: ts.fujitsu.com<http://ts.fujitsu.com/>

Company details: OOO Fujitsu Technology Solutions / ts.fujitsu.com/imprint<http://ts.fujitsu.com/imprint.html>

This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.

Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.



From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Tim McCarthy
Sent: Thursday, February 4, 2021 4:24 PM
To: Carl Howell <chowell@uwf.edu<mailto:chowell@uwf.edu>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Re: 7-mode upgrade mismatch



Probably the best thing to do is call support ????



If I were to try something I would not the node to the bot menu. I think there is an option to install software.



Been a while. I may be wrong



Get Outlook for iOS<https://aka.ms/o0ukef>

________________________________

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Carl Howell <chowell@uwf.edu<mailto:chowell@uwf.edu>>
Sent: Thursday, February 4, 2021 8:21 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: 7-mode upgrade mismatch



I have a 3240 cluster with node A running 8.2.5P5 and node B running 8.1.4P9. Node A was upgraded to 8.2.5P5 and giveback was performed from node B. Takeover of node B by node A was performed, and both nodes are now running on node A. But, node B was not upgraded to 8.2.5P5 before the takeover and now when we attempt to giveback to node B so that it can be upgraded, it panics.



So, node A running 8.2.5P5 in takeover mode. Node B running 8.1.4P9 has been taken over by A. How can we get B upgraded to 8.2.5P5?



Thanks,



--Carl