Mailing List Archive

RE: [EXTERNAL] Re: Is XCP still maintained?
Thanks brother. I did find it, and realize that I was really just being a knucklehead of enormous proportions.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Tim McCarthy <tmacmd@gmail.com>
Sent: Tuesday, January 12, 2021 9:27 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org>; toasters@teaparty.net
Subject: [EXTERNAL] Re: Is XCP still maintained?

While email attachments are a popular and convenient way to send documents, they are also a common source of viruses. Use caution when opening attachments, even if they appear to have been sent by someone you know.

https://XCP.Netapp.com
It's all there with links

Get Outlook for iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>
Sent: Tuesday, January 12, 2021 9:10:05 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: Is XCP still maintained?


Yup. I was missing something obvious. D'oh!

Given the current state of things here in the good 'ole USA, I consider my oversight entirely understandable, since my mind really hasn't been straight since 09/11/2016, and things really got, distracting shall we say, last week.





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org





From: Davis, Kevin
Sent: Tuesday, January 12, 2021 9:07 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Is XCP still maintained?



I can no longer find the executable. Searches only deliver support requests or documentation links.

Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect to https://mysupport.netapp.com/site/downloads, where it's nowhere to be found.



Yes, I could renew my license. But while searching just to see if the installation files for SMB or the tarball was current, I came up empty.

Am I missing something obvious?





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org






The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
RE: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
It's also officially supported by NetApp now as of version 1.5. That means you can call in for help and development is actively ongoing.

From: Toasters <toasters-bounces@teaparty.net> On Behalf Of Davis, Kevin
Sent: Tuesday, January 12, 2021 9:42 AM
To: Tim McCarthy <tmacmd@gmail.com>; toasters@teaparty.net
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Thanks brother. I did find it, and realize that I was really just being a knucklehead of enormous proportions.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Tuesday, January 12, 2021 9:27 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: [EXTERNAL] Re: Is XCP still maintained?

While email attachments are a popular and convenient way to send documents, they are also a common source of viruses. Use caution when opening attachments, even if they appear to have been sent by someone you know.

https://XCP.Netapp.com
It's all there with links

Get Outlook for iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>
Sent: Tuesday, January 12, 2021 9:10:05 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: Is XCP still maintained?


Yup. I was missing something obvious. D'oh!

Given the current state of things here in the good 'ole USA, I consider my oversight entirely understandable, since my mind really hasn't been straight since 09/11/2016, and things really got, distracting shall we say, last week.





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org





From: Davis, Kevin
Sent: Tuesday, January 12, 2021 9:07 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Is XCP still maintained?



I can no longer find the executable. Searches only deliver support requests or documentation links.

Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect to https://mysupport.netapp.com/site/downloads, where it's nowhere to be found.



Yes, I could renew my license. But while searching just to see if the installation files for SMB or the tarball was current, I came up empty.

Am I missing something obvious?





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org






The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
RE: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
I was recently trying to install XCP 1.6.1 and 1.6.2 on CentOS 7.8 but keep getting error related to "central" user password mismatch while configuring its Analytics part. NetApp support kept saying to try this on RHEL 8 but we don't have RHEL8 in our environment. Any of you faced same behavior with XCP Analytics install?

Regards
Manish

From: Toasters <toasters-bounces@teaparty.net> On Behalf Of Parisi, Justin
Sent: Tuesday, January 12, 2021 9:01 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org>; Tim McCarthy <tmacmd@gmail.com>; toasters@teaparty.net
Subject: {External} RE: [EXTERNAL] Re: Is XCP still maintained?

It's also officially supported by NetApp now as of version 1.5. That means you can call in for help and development is actively ongoing.

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Davis, Kevin
Sent: Tuesday, January 12, 2021 9:42 AM
To: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Thanks brother. I did find it, and realize that I was really just being a knucklehead of enormous proportions.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Tuesday, January 12, 2021 9:27 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: [EXTERNAL] Re: Is XCP still maintained?

While email attachments are a popular and convenient way to send documents, they are also a common source of viruses. Use caution when opening attachments, even if they appear to have been sent by someone you know.

https://XCP.Netapp.com
It's all there with links

Get Outlook for iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>
Sent: Tuesday, January 12, 2021 9:10:05 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: Is XCP still maintained?


Yup. I was missing something obvious. D'oh!

Given the current state of things here in the good 'ole USA, I consider my oversight entirely understandable, since my mind really hasn't been straight since 09/11/2016, and things really got, distracting shall we say, last week.





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org





From: Davis, Kevin
Sent: Tuesday, January 12, 2021 9:07 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Is XCP still maintained?



I can no longer find the executable. Searches only deliver support requests or documentation links.

Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect to https://mysupport.netapp.com/site/downloads, where it's nowhere to be found.



Yes, I could renew my license. But while searching just to see if the installation files for SMB or the tarball was current, I came up empty.

Am I missing something obvious?





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org






The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
RE: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
I'm just starting 1.6.2 install, looking to take a peek at the analytics piece myself.
We run RHEL here, but I'll let you know if I run into any issues or see what you're describing.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Arora, Manish <Manish.Arora@bsci.com>
Sent: Thursday, January 14, 2021 2:18 AM
To: Parisi, Justin <Justin.Parisi@netapp.com>; Davis, Kevin <Kevin.Davis@umassmemorial.org>; Tim McCarthy <tmacmd@gmail.com>; toasters@teaparty.net
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

I was recently trying to install XCP 1.6.1 and 1.6.2 on CentOS 7.8 but keep getting error related to "central" user password mismatch while configuring its Analytics part. NetApp support kept saying to try this on RHEL 8 but we don't have RHEL8 in our environment. Any of you faced same behavior with XCP Analytics install?

Regards
Manish

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Parisi, Justin
Sent: Tuesday, January 12, 2021 9:01 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: {External} RE: [EXTERNAL] Re: Is XCP still maintained?

It's also officially supported by NetApp now as of version 1.5. That means you can call in for help and development is actively ongoing.

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Davis, Kevin
Sent: Tuesday, January 12, 2021 9:42 AM
To: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Thanks brother. I did find it, and realize that I was really just being a knucklehead of enormous proportions.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Tuesday, January 12, 2021 9:27 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: [EXTERNAL] Re: Is XCP still maintained?

While email attachments are a popular and convenient way to send documents, they are also a common source of viruses. Use caution when opening attachments, even if they appear to have been sent by someone you know.

https://XCP.Netapp.com<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fxcp.netapp.com%2F&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Ce49cb8b35e5849fdc6a108d8b85c83ca%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637462054805496067%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=myA7L27GZX2fHmxC4onz58PIvUu7kOyJHcJBAcJoOpo%3D&reserved=0>
It's all there with links

Get Outlook for iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Ce49cb8b35e5849fdc6a108d8b85c83ca%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637462054805506062%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=QYeqysVnL9HWOE8ZlTtiyW4yiRM9rCPS0uYuyZh86FI%3D&reserved=0>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>
Sent: Tuesday, January 12, 2021 9:10:05 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: Is XCP still maintained?


Yup. I was missing something obvious. D'oh!

Given the current state of things here in the good 'ole USA, I consider my oversight entirely understandable, since my mind really hasn't been straight since 09/11/2016, and things really got, distracting shall we say, last week.





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org





From: Davis, Kevin
Sent: Tuesday, January 12, 2021 9:07 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Is XCP still maintained?



I can no longer find the executable. Searches only deliver support requests or documentation links.

Links such as: https://mysupport.netapp.com/products/p/xcp.html<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmysupport.netapp.com%2Fproducts%2Fp%2Fxcp.html&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Ce49cb8b35e5849fdc6a108d8b85c83ca%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637462054805516054%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=W7ByEvpRJmZrrtbNzCknOParzYpBrMGA5WUVuf0sxFU%3D&reserved=0>, redirect to https://mysupport.netapp.com/site/downloads<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmysupport.netapp.com%2Fsite%2Fdownloads&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Ce49cb8b35e5849fdc6a108d8b85c83ca%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637462054805516054%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=eJgW%2B%2FyD4LO0ZsScBkPIfnZMC%2F5cVhuXCSXifZk%2BhE4%3D&reserved=0>, where it's nowhere to be found.



Yes, I could renew my license. But while searching just to see if the installation files for SMB or the tarball was current, I came up empty.

Am I missing something obvious?





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org






The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
RE: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
RHEL 7 works fine with it. I have that running in my environment. (well, CentOS at least)

# xcp
XCP 1.6.1; (c) 2021 NetApp, Inc.; Licensed to Justin Parisi [NetApp Inc] until Mon Mar 22 09:22:27 2021

# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)

The issue is likely related to this:

https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FXCP_-_Cannot_Access_Management_GUI_after_installation

Try the steps in that above and see if it lets you reset the password. Also, make sure things like SELinux and the firewall are disabled:

# sestatus
SELinux status: disabled

# service firewalld status
Redirecting to /bin/systemctl status firewalld.service
$B!|(B firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:firewalld(1)

The reason they$B!G(Bre pushing you towards RHEL8 is this:

https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FInstalling_XCP_File_Analytics_1.6.x_fails_on_RHEL7

From: Arora, Manish <Manish.Arora@bsci.com>
Sent: Thursday, January 14, 2021 2:18 AM
To: Parisi, Justin <Justin.Parisi@netapp.com>; Davis, Kevin <Kevin.Davis@umassmemorial.org>; Tim McCarthy <tmacmd@gmail.com>; toasters@teaparty.net
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.


I was recently trying to install XCP 1.6.1 and 1.6.2 on CentOS 7.8 but keep getting error related to $B!H(Bcentral$B!I(B user password mismatch while configuring its Analytics part. NetApp support kept saying to try this on RHEL 8 but we don$B!G(Bt have RHEL8 in our environment. Any of you faced same behavior with XCP Analytics install?

Regards
Manish

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Parisi, Justin
Sent: Tuesday, January 12, 2021 9:01 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: {External} RE: [EXTERNAL] Re: Is XCP still maintained?

It$B!G(Bs also officially supported by NetApp now as of version 1.5. That means you can call in for help and development is actively ongoing.

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Davis, Kevin
Sent: Tuesday, January 12, 2021 9:42 AM
To: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Thanks brother. I did find it, and realize that I was really just being a knucklehead of enormous proportions.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Tuesday, January 12, 2021 9:27 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: [EXTERNAL] Re: Is XCP still maintained?

While email attachments are a popular and convenient way to send documents, they are also a common source of viruses. Use caution when opening attachments, even if they appear to have been sent by someone you know.

https://XCP.Netapp.com
It$B!G(Bs all there with links

Get Outlook for iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>
Sent: Tuesday, January 12, 2021 9:10:05 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: Is XCP still maintained?


Yup. I was missing something obvious. D$B!G(Boh!

Given the current state of things here in the good $B!F(Bole USA, I consider my oversight entirely understandable, since my mind really hasn$B!G(Bt been straight since 09/11/2016, and things really got, distracting shall we say, last week.





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org





From: Davis, Kevin
Sent: Tuesday, January 12, 2021 9:07 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Is XCP still maintained?



I can no longer find the executable. Searches only deliver support requests or documentation links.

Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect to https://mysupport.netapp.com/site/downloads, where it$B!G(Bs nowhere to be found.



Yes, I could renew my license. But while searching just to see if the installation files for SMB or the tarball was current, I came up empty.

Am I missing something obvious?





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org






The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
Re: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
For what it is worth: NetApp's IMT shows that 1.6.2 is supported with
RHEL8.0
I just tried CENTOS 7.9 with XCP 1.6.2 (no problem):

[tmac@centos7 linux]$ sudo ./xcp activate
XCP 1.6.2; (c) 2021 NetApp, Inc.; Licensed to Tim McCarthy [None] until Thu
Mar 4 15:45:00 2021

XCP already activated

[tmac@centos7 linux]$ sudo ./xcp help
USAGE:
xcp [[help] [command]| -version]

optional arguments:
help Show XCP help message and exit
-version Show XCP version number and exit

To see help text, you can run:
xcp help Display this content
xcp help info Step by step usage of all commands
xcp help <command> Individual command help

command:
activate Activate an XCP license on the current host
license Show XCP license information
show Request information from host about NFS exports
scan Read all the files from export path
copy Recursively copy everything from source to target
resume Resume copy operation from the point it was halted
sync Synchronize increment changes on source to target
after copy
verify Verify that the target is the same as the source
delete Delete data on the NFS exported volume
[tmac@centos7 linux]$ cat /etc/redhat-release
CentOS Linux release 7.9.2009 (Core)

--tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam <https://twitter.com/NetAppATeam>*

*I Blog at TMACsRack <https://tmacsrack.wordpress.com/>*



On Thu, Jan 14, 2021 at 9:42 AM Parisi, Justin <Justin.Parisi@netapp.com>
wrote:

> RHEL 7 works fine with it. I have that running in my environment. (well,
> CentOS at least)
>
>
>
> # xcp
>
> XCP 1.6.1; (c) 2021 NetApp, Inc.; Licensed to Justin Parisi [NetApp Inc]
> until Mon Mar 22 09:22:27 2021
>
>
>
> # cat /etc/redhat-release
>
> CentOS Linux release 7.5.1804 (Core)
>
>
>
> The issue is likely related to this:
>
>
>
>
> https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FXCP_-_Cannot_Access_Management_GUI_after_installation
>
>
>
> Try the steps in that above and see if it lets you reset the password.
> Also, make sure things like SELinux and the firewall are disabled:
>
>
>
> # sestatus
>
> SELinux status: disabled
>
>
>
> # service firewalld status
>
> Redirecting to /bin/systemctl status firewalld.service
>
> ? firewalld.service - firewalld - dynamic firewall daemon
>
> Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled;
> vendor preset: enabled)
>
> Active: inactive (dead)
>
> Docs: man:firewalld(1)
>
>
>
> The reason they’re pushing you towards RHEL8 is this:
>
>
>
>
> https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FInstalling_XCP_File_Analytics_1.6.x_fails_on_RHEL7
>
>
>
> *From:* Arora, Manish <Manish.Arora@bsci.com>
> *Sent:* Thursday, January 14, 2021 2:18 AM
> *To:* Parisi, Justin <Justin.Parisi@netapp.com>; Davis, Kevin <
> Kevin.Davis@umassmemorial.org>; Tim McCarthy <tmacmd@gmail.com>;
> toasters@teaparty.net
> *Subject:* RE: [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> *NetApp Security WARNING*: This is an external email. Do not click links
> or open attachments unless you recognize the sender and know the content is
> safe.
>
>
>
> I was recently trying to install XCP 1.6.1 and 1.6.2 on CentOS 7.8 but
> keep getting error related to “central” user password mismatch while
> configuring its Analytics part. NetApp support kept saying to try this on
> RHEL 8 but we don’t have RHEL8 in our environment. Any of you faced same
> behavior with XCP Analytics install?
>
>
>
> Regards
>
> Manish
>
>
>
> *From:* Toasters <toasters-bounces@teaparty.net> *On Behalf Of *Parisi,
> Justin
> *Sent:* Tuesday, January 12, 2021 9:01 AM
> *To:* Davis, Kevin <Kevin.Davis@umassmemorial.org>; Tim McCarthy <
> tmacmd@gmail.com>; toasters@teaparty.net
> *Subject:* {External} RE: [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> It’s also officially supported by NetApp now as of version 1.5. That means
> you can call in for help and development is actively ongoing.
>
>
>
> *From:* Toasters <toasters-bounces@teaparty.net> *On Behalf Of *Davis,
> Kevin
> *Sent:* Tuesday, January 12, 2021 9:42 AM
> *To:* Tim McCarthy <tmacmd@gmail.com>; toasters@teaparty.net
> *Subject:* RE: [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> *NetApp Security WARNING*: This is an external email. Do not click links
> or open attachments unless you recognize the sender and know the content is
> safe.
>
>
>
> Thanks brother. I did find it, and realize that I was really just being a
> knucklehead of enormous proportions.
>
>
>
>
>
> --
>
> Kevin Davis
>
> Systems Administration | Sr. Storage Engineer | Information Services
>
> UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
>
> W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org
> <kevin.davis@umassmemorial.org>
>
>
>
>
>
> *From:* Tim McCarthy <tmacmd@gmail.com>
> *Sent:* Tuesday, January 12, 2021 9:27 AM
> *To:* Davis, Kevin <Kevin.Davis@umassmemorial.org>; toasters@teaparty.net
> *Subject:* [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> While email attachments are a popular and convenient way to send
> documents, they are also a common source of viruses. Use caution when
> opening attachments, even if they appear to have been sent by someone you
> know.
>
>
>
> https://XCP.Netapp.com
>
> It’s all there with links
>
>
>
> Get Outlook for iOS
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
> ------------------------------
>
> *From:* Toasters <toasters-bounces@teaparty.net> on behalf of Davis,
> Kevin <Kevin.Davis@umassmemorial.org>
> *Sent:* Tuesday, January 12, 2021 9:10:05 AM
> *To:* toasters@teaparty.net <toasters@teaparty.net>
> *Subject:* RE: Is XCP still maintained?
>
>
>
> Yup. I was missing something obvious. D’oh!
>
> Given the current state of things here in the good ‘ole USA, I consider my
> oversight entirely understandable, since my mind really hasn’t been
> straight since 09/11/2016, and things really got, distracting shall we say,
> last week.
>
>
>
>
>
> --
>
> Kevin Davis
>
> Systems Administration | Sr. Storage Engineer | Information Services
>
> UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
>
> W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org
> <kevin.davis@umassmemorial.org>
>
>
>
>
>
> *From:* Davis, Kevin
> *Sent:* Tuesday, January 12, 2021 9:07 AM
> *To:* toasters@teaparty.net
> *Subject:* Is XCP still maintained?
>
>
>
> I can no longer find the executable. Searches only deliver support
> requests or documentation links.
>
> Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect
> to https://mysupport.netapp.com/site/downloads, where it’s nowhere to be
> found.
>
>
>
> Yes, I could renew my license. But while searching just to see if the
> installation files for SMB or the tarball was current, I came up empty.
>
> Am I missing something obvious?
>
>
>
>
>
> --
>
> Kevin Davis
>
> Systems Administration | Sr. Storage Engineer | Information Services
>
> UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
>
> W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org
> <kevin.davis@umassmemorial.org>
>
>
>
>
>
>
>
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, transmission, re-transmission, dissemination or other
> use of, or taking of any action in reliance upon this information by
> persons or entities other than the intended recipient is prohibited. If you
> received this in error, please contact the sender and delete the material
> from any computer.
>
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, transmission, re-transmission, dissemination or other
> use of, or taking of any action in reliance upon this information by
> persons or entities other than the intended recipient is prohibited. If you
> received this in error, please contact the sender and delete the material
> from any computer.
>
RE: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
Yea what the IMT piece means is that is the RHEL version that has been tested and qualified.

And it means that support will point to that as the issue rather than troubleshooting the problem (honestly, rightfully so… we didn’t test/qualify RHEL 7)/

From: tmac <tmacmd@gmail.com>
Sent: Thursday, January 14, 2021 11:02 AM
To: Parisi, Justin <Justin.Parisi@netapp.com>
Cc: Arora, Manish <Manish.Arora@bsci.com>; Davis, Kevin <Kevin.Davis@umassmemorial.org>; toasters@teaparty.net
Subject: Re: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.


For what it is worth: NetApp's IMT shows that 1.6.2 is supported with RHEL8.0
I just tried CENTOS 7.9 with XCP 1.6.2 (no problem):

[tmac@centos7 linux]$ sudo ./xcp activate
XCP 1.6.2; (c) 2021 NetApp, Inc.; Licensed to Tim McCarthy [None] until Thu Mar 4 15:45:00 2021

XCP already activated

[tmac@centos7 linux]$ sudo ./xcp help
USAGE:
xcp [[help] [command]| -version]

optional arguments:
help Show XCP help message and exit
-version Show XCP version number and exit

To see help text, you can run:
xcp help Display this content
xcp help info Step by step usage of all commands
xcp help <command> Individual command help

command:
activate Activate an XCP license on the current host
license Show XCP license information
show Request information from host about NFS exports
scan Read all the files from export path
copy Recursively copy everything from source to target
resume Resume copy operation from the point it was halted
sync Synchronize increment changes on source to target after copy
verify Verify that the target is the same as the source
delete Delete data on the NFS exported volume
[tmac@centos7 linux]$ cat /etc/redhat-release
CentOS Linux release 7.9.2009 (Core)

--tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeam<https://twitter.com/NetAppATeam>

I Blog at TMACsRack<https://tmacsrack.wordpress.com/>



On Thu, Jan 14, 2021 at 9:42 AM Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>> wrote:
RHEL 7 works fine with it. I have that running in my environment. (well, CentOS at least)

# xcp
XCP 1.6.1; (c) 2021 NetApp, Inc.; Licensed to Justin Parisi [NetApp Inc] until Mon Mar 22 09:22:27 2021

# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)

The issue is likely related to this:

https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FXCP_-_Cannot_Access_Management_GUI_after_installation

Try the steps in that above and see if it lets you reset the password. Also, make sure things like SELinux and the firewall are disabled:

# sestatus
SELinux status: disabled

# service firewalld status
Redirecting to /bin/systemctl status firewalld.service
? firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:firewalld(1)

The reason they’re pushing you towards RHEL8 is this:

https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FInstalling_XCP_File_Analytics_1.6.x_fails_on_RHEL7

From: Arora, Manish <Manish.Arora@bsci.com<mailto:Manish.Arora@bsci.com>>
Sent: Thursday, January 14, 2021 2:18 AM
To: Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>>; Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

I was recently trying to install XCP 1.6.1 and 1.6.2 on CentOS 7.8 but keep getting error related to “central” user password mismatch while configuring its Analytics part. NetApp support kept saying to try this on RHEL 8 but we don’t have RHEL8 in our environment. Any of you faced same behavior with XCP Analytics install?

Regards
Manish

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Parisi, Justin
Sent: Tuesday, January 12, 2021 9:01 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: {External} RE: [EXTERNAL] Re: Is XCP still maintained?

It’s also officially supported by NetApp now as of version 1.5. That means you can call in for help and development is actively ongoing.

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Davis, Kevin
Sent: Tuesday, January 12, 2021 9:42 AM
To: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Thanks brother. I did find it, and realize that I was really just being a knucklehead of enormous proportions.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Tuesday, January 12, 2021 9:27 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: [EXTERNAL] Re: Is XCP still maintained?

While email attachments are a popular and convenient way to send documents, they are also a common source of viruses. Use caution when opening attachments, even if they appear to have been sent by someone you know.

https://XCP.Netapp.com
It’s all there with links

Get Outlook for iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>
Sent: Tuesday, January 12, 2021 9:10:05 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: Is XCP still maintained?


Yup. I was missing something obvious. D’oh!

Given the current state of things here in the good ‘ole USA, I consider my oversight entirely understandable, since my mind really hasn’t been straight since 09/11/2016, and things really got, distracting shall we say, last week.





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org





From: Davis, Kevin
Sent: Tuesday, January 12, 2021 9:07 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Is XCP still maintained?



I can no longer find the executable. Searches only deliver support requests or documentation links.

Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect to https://mysupport.netapp.com/site/downloads, where it’s nowhere to be found.



Yes, I could renew my license. But while searching just to see if the installation files for SMB or the tarball was current, I came up empty.

Am I missing something obvious?





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org






The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
RE: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
Thanks Tim and Justin for getting back.

I am still getting same error while configuring XCP 1.6.2.

Retype same password :
# Updating database entries
(pg.InternalError) FATAL: password authentication failed for user "central"

(Background on this error at: http://sqlalche.me/e/2j85)
NOTE: Please make sure you are root user. File Analytics installation unsuccessful. Please refer the user guide.

Also tried with disabling of SELinux but no luck. Internal Firewall service is also disabled. Got CentOS patched from 7.8 to 7.9 but same error.

CentOS Linux release 7.9.2009 (Core)

Our Unix team is not supporting 8.0 version yet, so cant upgrade to that version. Could someone share rpm -qa output from the 7.9 machine where XCP 1.6.2 is working so that I can get that compared?

Regards,
Manish


From: Parisi, Justin <Justin.Parisi@netapp.com>
Sent: Thursday, January 14, 2021 10:05 AM
To: tmac <tmacmd@gmail.com>
Cc: Arora, Manish <Manish.Arora@bsci.com>; Davis, Kevin <Kevin.Davis@umassmemorial.org>; toasters@teaparty.net
Subject: {External} RE: [EXTERNAL] Re: Is XCP still maintained?

Yea what the IMT piece means is that is the RHEL version that has been tested and qualified.

And it means that support will point to that as the issue rather than troubleshooting the problem (honestly, rightfully so… we didn’t test/qualify RHEL 7)/

From: tmac <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Thursday, January 14, 2021 11:02 AM
To: Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>>
Cc: Arora, Manish <Manish.Arora@bsci.com<mailto:Manish.Arora@bsci.com>>; Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Re: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

For what it is worth: NetApp's IMT shows that 1.6.2 is supported with RHEL8.0
I just tried CENTOS 7.9 with XCP 1.6.2 (no problem):

[tmac@centos7 linux]$ sudo ./xcp activate
XCP 1.6.2; (c) 2021 NetApp, Inc.; Licensed to Tim McCarthy [None] until Thu Mar 4 15:45:00 2021

XCP already activated

[tmac@centos7 linux]$ sudo ./xcp help
USAGE:
xcp [[help] [command]| -version]

optional arguments:
help Show XCP help message and exit
-version Show XCP version number and exit

To see help text, you can run:
xcp help Display this content
xcp help info Step by step usage of all commands
xcp help <command> Individual command help

command:
activate Activate an XCP license on the current host
license Show XCP license information
show Request information from host about NFS exports
scan Read all the files from export path
copy Recursively copy everything from source to target
resume Resume copy operation from the point it was halted
sync Synchronize increment changes on source to target after copy
verify Verify that the target is the same as the source
delete Delete data on the NFS exported volume
[tmac@centos7 linux]$ cat /etc/redhat-release
CentOS Linux release 7.9.2009 (Core)

--tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeam<https://twitter.com/NetAppATeam>

I Blog at TMACsRack<https://tmacsrack.wordpress.com/>



On Thu, Jan 14, 2021 at 9:42 AM Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>> wrote:
RHEL 7 works fine with it. I have that running in my environment. (well, CentOS at least)

# xcp
XCP 1.6.1; (c) 2021 NetApp, Inc.; Licensed to Justin Parisi [NetApp Inc] until Mon Mar 22 09:22:27 2021

# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)

The issue is likely related to this:

https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FXCP_-_Cannot_Access_Management_GUI_after_installation

Try the steps in that above and see if it lets you reset the password. Also, make sure things like SELinux and the firewall are disabled:

# sestatus
SELinux status: disabled

# service firewalld status
Redirecting to /bin/systemctl status firewalld.service
? firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:firewalld(1)

The reason they’re pushing you towards RHEL8 is this:

https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FInstalling_XCP_File_Analytics_1.6.x_fails_on_RHEL7

From: Arora, Manish <Manish.Arora@bsci.com<mailto:Manish.Arora@bsci.com>>
Sent: Thursday, January 14, 2021 2:18 AM
To: Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>>; Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

I was recently trying to install XCP 1.6.1 and 1.6.2 on CentOS 7.8 but keep getting error related to “central” user password mismatch while configuring its Analytics part. NetApp support kept saying to try this on RHEL 8 but we don’t have RHEL8 in our environment. Any of you faced same behavior with XCP Analytics install?

Regards
Manish

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Parisi, Justin
Sent: Tuesday, January 12, 2021 9:01 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: {External} RE: [EXTERNAL] Re: Is XCP still maintained?

It’s also officially supported by NetApp now as of version 1.5. That means you can call in for help and development is actively ongoing.

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Davis, Kevin
Sent: Tuesday, January 12, 2021 9:42 AM
To: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Thanks brother. I did find it, and realize that I was really just being a knucklehead of enormous proportions.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Tuesday, January 12, 2021 9:27 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: [EXTERNAL] Re: Is XCP still maintained?

While email attachments are a popular and convenient way to send documents, they are also a common source of viruses. Use caution when opening attachments, even if they appear to have been sent by someone you know.

https://XCP.Netapp.com
It’s all there with links

Get Outlook for iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>
Sent: Tuesday, January 12, 2021 9:10:05 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: Is XCP still maintained?


Yup. I was missing something obvious. D’oh!

Given the current state of things here in the good ‘ole USA, I consider my oversight entirely understandable, since my mind really hasn’t been straight since 09/11/2016, and things really got, distracting shall we say, last week.





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org





From: Davis, Kevin
Sent: Tuesday, January 12, 2021 9:07 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Is XCP still maintained?



I can no longer find the executable. Searches only deliver support requests or documentation links.

Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect to https://mysupport.netapp.com/site/downloads, where it’s nowhere to be found.



Yes, I could renew my license. But while searching just to see if the installation files for SMB or the tarball was current, I came up empty.

Am I missing something obvious?





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org






The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
Re: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
Try re-running the "configure.sh" script and uninstall.
Then run again with option 1 and show your output.

--tmac

*Tim McCarthy, **Principal Consultant*

*Proud Member of the #NetAppATeam <https://twitter.com/NetAppATeam>*

*I Blog at TMACsRack <https://tmacsrack.wordpress.com/>*



On Wed, Jan 20, 2021 at 1:50 AM Arora, Manish <Manish.Arora@bsci.com> wrote:

> Thanks Tim and Justin for getting back.
>
>
>
> I am still getting same error while configuring XCP 1.6.2.
>
>
>
> Retype same password :
>
> # Updating database entries
>
> (pg.InternalError) FATAL: password authentication failed for user
> "central"
>
>
>
> (Background on this error at: http://sqlalche.me/e/2j85)
>
> NOTE: Please make sure you are root user. File Analytics installation
> unsuccessful. Please refer the user guide.
>
>
>
> Also tried with disabling of SELinux but no luck. Internal Firewall
> service is also disabled. Got CentOS patched from 7.8 to 7.9 but same error.
>
>
>
> CentOS Linux release 7.9.2009 (Core)
>
>
>
> Our Unix team is not supporting 8.0 version yet, so cant upgrade to that
> version. Could someone share rpm -qa output from the 7.9 machine where XCP
> 1.6.2 is working so that I can get that compared?
>
>
>
> Regards,
>
> Manish
>
>
>
>
>
> *From:* Parisi, Justin <Justin.Parisi@netapp.com>
> *Sent:* Thursday, January 14, 2021 10:05 AM
> *To:* tmac <tmacmd@gmail.com>
> *Cc:* Arora, Manish <Manish.Arora@bsci.com>; Davis, Kevin <
> Kevin.Davis@umassmemorial.org>; toasters@teaparty.net
> *Subject:* {External} RE: [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> Yea what the IMT piece means is that is the RHEL version that has been
> tested and qualified.
>
>
>
> And it means that support will point to that as the issue rather than
> troubleshooting the problem (honestly, rightfully so… we didn’t
> test/qualify RHEL 7)/
>
>
>
> *From:* tmac <tmacmd@gmail.com>
> *Sent:* Thursday, January 14, 2021 11:02 AM
> *To:* Parisi, Justin <Justin.Parisi@netapp.com>
> *Cc:* Arora, Manish <Manish.Arora@bsci.com>; Davis, Kevin <
> Kevin.Davis@umassmemorial.org>; toasters@teaparty.net
> *Subject:* Re: [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> *NetApp Security WARNING*: This is an external email. Do not click links
> or open attachments unless you recognize the sender and know the content is
> safe.
>
>
>
> For what it is worth: NetApp's IMT shows that 1.6.2 is supported with
> RHEL8.0
>
> I just tried CENTOS 7.9 with XCP 1.6.2 (no problem):
>
>
>
> [tmac@centos7 linux]$ sudo ./xcp activate
> XCP 1.6.2; (c) 2021 NetApp, Inc.; Licensed to Tim McCarthy [None] until
> Thu Mar 4 15:45:00 2021
>
> XCP already activated
>
> [tmac@centos7 linux]$ sudo ./xcp help
> USAGE:
> xcp [[help] [command]| -version]
>
> optional arguments:
> help Show XCP help message and exit
> -version Show XCP version number and exit
>
> To see help text, you can run:
> xcp help Display this content
> xcp help info Step by step usage of all commands
> xcp help <command> Individual command help
>
> command:
> activate Activate an XCP license on the current host
> license Show XCP license information
> show Request information from host about NFS exports
> scan Read all the files from export path
> copy Recursively copy everything from source to target
> resume Resume copy operation from the point it was halted
> sync Synchronize increment changes on source to target
> after copy
> verify Verify that the target is the same as the source
> delete Delete data on the NFS exported volume
> [tmac@centos7 linux]$ cat /etc/redhat-release
> CentOS Linux release 7.9.2009 (Core)
>
>
>
> --tmac
>
>
>
> *Tim McCarthy, **Principal Consultant*
>
> *Proud Member of the #NetAppATeam <https://twitter.com/NetAppATeam>*
>
> *I Blog at **TMACsRack <https://tmacsrack.wordpress.com/>*
>
>
>
>
>
>
>
> On Thu, Jan 14, 2021 at 9:42 AM Parisi, Justin <Justin.Parisi@netapp.com>
> wrote:
>
> RHEL 7 works fine with it. I have that running in my environment. (well,
> CentOS at least)
>
>
>
> # xcp
>
> XCP 1.6.1; (c) 2021 NetApp, Inc.; Licensed to Justin Parisi [NetApp Inc]
> until Mon Mar 22 09:22:27 2021
>
>
>
> # cat /etc/redhat-release
>
> CentOS Linux release 7.5.1804 (Core)
>
>
>
> The issue is likely related to this:
>
>
>
>
> https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FXCP_-_Cannot_Access_Management_GUI_after_installation
>
>
>
> Try the steps in that above and see if it lets you reset the password.
> Also, make sure things like SELinux and the firewall are disabled:
>
>
>
> # sestatus
>
> SELinux status: disabled
>
>
>
> # service firewalld status
>
> Redirecting to /bin/systemctl status firewalld.service
>
> ? firewalld.service - firewalld - dynamic firewall daemon
>
> Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled;
> vendor preset: enabled)
>
> Active: inactive (dead)
>
> Docs: man:firewalld(1)
>
>
>
> The reason they’re pushing you towards RHEL8 is this:
>
>
>
>
> https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FInstalling_XCP_File_Analytics_1.6.x_fails_on_RHEL7
>
>
>
> *From:* Arora, Manish <Manish.Arora@bsci.com>
> *Sent:* Thursday, January 14, 2021 2:18 AM
> *To:* Parisi, Justin <Justin.Parisi@netapp.com>; Davis, Kevin <
> Kevin.Davis@umassmemorial.org>; Tim McCarthy <tmacmd@gmail.com>;
> toasters@teaparty.net
> *Subject:* RE: [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> *NetApp Security WARNING*: This is an external email. Do not click links
> or open attachments unless you recognize the sender and know the content is
> safe.
>
>
>
> I was recently trying to install XCP 1.6.1 and 1.6.2 on CentOS 7.8 but
> keep getting error related to “central” user password mismatch while
> configuring its Analytics part. NetApp support kept saying to try this on
> RHEL 8 but we don’t have RHEL8 in our environment. Any of you faced same
> behavior with XCP Analytics install?
>
>
>
> Regards
>
> Manish
>
>
>
> *From:* Toasters <toasters-bounces@teaparty.net> *On Behalf Of *Parisi,
> Justin
> *Sent:* Tuesday, January 12, 2021 9:01 AM
> *To:* Davis, Kevin <Kevin.Davis@umassmemorial.org>; Tim McCarthy <
> tmacmd@gmail.com>; toasters@teaparty.net
> *Subject:* {External} RE: [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> It’s also officially supported by NetApp now as of version 1.5. That means
> you can call in for help and development is actively ongoing.
>
>
>
> *From:* Toasters <toasters-bounces@teaparty.net> *On Behalf Of *Davis,
> Kevin
> *Sent:* Tuesday, January 12, 2021 9:42 AM
> *To:* Tim McCarthy <tmacmd@gmail.com>; toasters@teaparty.net
> *Subject:* RE: [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> *NetApp Security WARNING*: This is an external email. Do not click links
> or open attachments unless you recognize the sender and know the content is
> safe.
>
>
>
> Thanks brother. I did find it, and realize that I was really just being a
> knucklehead of enormous proportions.
>
>
>
>
>
> --
>
> Kevin Davis
>
> Systems Administration | Sr. Storage Engineer | Information Services
>
> UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
>
> W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org
> <kevin.davis@umassmemorial.org>
>
>
>
>
>
> *From:* Tim McCarthy <tmacmd@gmail.com>
> *Sent:* Tuesday, January 12, 2021 9:27 AM
> *To:* Davis, Kevin <Kevin.Davis@umassmemorial.org>; toasters@teaparty.net
> *Subject:* [EXTERNAL] Re: Is XCP still maintained?
>
>
>
> While email attachments are a popular and convenient way to send
> documents, they are also a common source of viruses. Use caution when
> opening attachments, even if they appear to have been sent by someone you
> know.
>
>
>
> https://XCP.Netapp.com
>
> It’s all there with links
>
>
>
> Get Outlook for iOS
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
> ------------------------------
>
> *From:* Toasters <toasters-bounces@teaparty.net> on behalf of Davis,
> Kevin <Kevin.Davis@umassmemorial.org>
> *Sent:* Tuesday, January 12, 2021 9:10:05 AM
> *To:* toasters@teaparty.net <toasters@teaparty.net>
> *Subject:* RE: Is XCP still maintained?
>
>
>
> Yup. I was missing something obvious. D’oh!
>
> Given the current state of things here in the good ‘ole USA, I consider my
> oversight entirely understandable, since my mind really hasn’t been
> straight since 09/11/2016, and things really got, distracting shall we say,
> last week.
>
>
>
>
>
> --
>
> Kevin Davis
>
> Systems Administration | Sr. Storage Engineer | Information Services
>
> UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
>
> W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org
> <kevin.davis@umassmemorial.org>
>
>
>
>
>
> *From:* Davis, Kevin
> *Sent:* Tuesday, January 12, 2021 9:07 AM
> *To:* toasters@teaparty.net
> *Subject:* Is XCP still maintained?
>
>
>
> I can no longer find the executable. Searches only deliver support
> requests or documentation links.
>
> Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect
> to https://mysupport.netapp.com/site/downloads, where it’s nowhere to be
> found.
>
>
>
> Yes, I could renew my license. But while searching just to see if the
> installation files for SMB or the tarball was current, I came up empty.
>
> Am I missing something obvious?
>
>
>
>
>
> --
>
> Kevin Davis
>
> Systems Administration | Sr. Storage Engineer | Information Services
>
> UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
>
> W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org
> <kevin.davis@umassmemorial.org>
>
>
>
>
>
>
>
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, transmission, re-transmission, dissemination or other
> use of, or taking of any action in reliance upon this information by
> persons or entities other than the intended recipient is prohibited. If you
> received this in error, please contact the sender and delete the material
> from any computer.
>
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, transmission, re-transmission, dissemination or other
> use of, or taking of any action in reliance upon this information by
> persons or entities other than the intended recipient is prohibited. If you
> received this in error, please contact the sender and delete the material
> from any computer.
>
>
RE: [EXTERNAL] Re: Is XCP still maintained? [ In reply to ]
Here’s mine:

# rpm -qa
fontpackages-filesystem-1.44-8.el7.noarch
fuse-2.9.2-10.el7.x86_64
keyutils-1.5.8-3.el7.x86_64
libXpm-3.5.12-1.el7.x86_64
glib2-2.56.1-4.el7_6.x86_64
libmount-2.23.2-52.el7_5.1.x86_64
libglvnd-glx-1.0.1-0.8.git5baa1e5.el7.x86_64
perl-HTTP-Tiny-0.033-3.el7.noarch
graphite2-1.3.10-1.el7_3.x86_64
filesystem-3.2-25.el7.x86_64
perl-Encode-2.51-7.el7.x86_64
jbigkit-libs-2.0-11.el7.x86_64
python-perf-3.10.0-862.11.6.el7.x86_64
perl-Exporter-5.68-3.el7.noarch
rootfiles-8.1-11.el7.noarch
fribidi-1.0.2-1.el7.x86_64
python-schedutils-0.4-6.el7.x86_64
perl-Carp-1.26-244.el7.noarch
hicolor-icon-theme-0.12-7.el7.noarch
python-firewall-0.4.4.4-14.el7.noarch
bzip2-libs-1.0.6-13.el7.x86_64
cairo-1.15.12-3.el7.x86_64
nss-sysinit-3.36.0-5.el7_5.x86_64
perl-File-Path-2.09-2.el7.noarch
libstdc++-4.8.5-36.el7_6.2.x86_64
xorg-x11-xinit-1.3.4-2.el7.x86_64
libquadmath-4.8.5-36.el7_6.2.x86_64
bind-libs-lite-9.9.4-61.el7_5.1.x86_64
libXau-1.0.8-2.1.el7.x86_64
unzip-6.0-19.el7.x86_64
libcurl-7.29.0-46.el7.x86_64
perl-Thread-Queue-3.02-2.el7.noarch
openldap-2.4.44-15.el7_5.x86_64
findutils-4.5.11-5.el7.x86_64
boost-date-time-1.53.0-27.el7.x86_64
libXmu-1.1.2-2.el7.x86_64
dyninst-9.3.1-2.el7.x86_64
mozjs17-17.0.0-20.el7.x86_64
libXdamage-1.1.4-4.1.el7.x86_64
xz-libs-5.2.2-1.el7.x86_64
libassuan-2.1.0-3.el7.x86_64
subversion-libs-1.7.14-14.el7.x86_64
libpath_utils-0.2.1-29.el7.x86_64
which-2.20-7.el7.x86_64
perl-Git-1.8.3.1-20.el7.noarch
perl-Getopt-Long-2.40-3.el7.noarch
libnfnetlink-1.0.1-4.el7.x86_64
bzip2-1.0.6-13.el7.x86_64
dmidecode-3.0-5.el7.x86_64
lua-5.1.4-15.el7.x86_64
lzo-2.06-8.el7.x86_64
redhat-rpm-config-9.1.0-87.el7.centos.noarch
libfastjson-0.99.4-2.el7.x86_64
hostname-3.13-3.el7.x86_64
perl-Test-Harness-3.28-3.el7.noarch
fuse-libs-2.9.2-10.el7.x86_64
kernel-debug-devel-3.10.0-957.27.2.el7.x86_64
iproute-4.11.0-14.el7.x86_64
cscope-15.8-10.el7.x86_64
cracklib-2.9.0-11.el7.i686
dbus-glib-0.100-7.el7.x86_64
gcc-c++-4.8.5-36.el7_6.2.x86_64
nettle-2.7.1-8.el7.x86_64
doxygen-1.8.5-3.el7.x86_64
audit-libs-2.8.1-3.el7_5.1.i686
python-six-1.9.0-2.el7.noarch
indent-2.2.11-13.el7.x86_64
util-linux-2.23.2-52.el7_5.1.x86_64
python-ipaddress-1.0.16-2.el7.noarch
libstdc++-4.8.5-36.el7_6.2.i686
device-mapper-libs-1.02.146-4.el7.x86_64
selinux-policy-3.13.1-192.el7_5.6.noarch
libedit-3.0-12.20121213cvs.el7.x86_64
nmap-6.40-19.el7.x86_64
selinux-policy-targeted-3.13.1-192.el7_5.6.noarch
snappy-1.1.0-3.el7.x86_64
uuid-1.6.2-26.el7.x86_64
dbus-1.10.24-7.el7.x86_64
python-websocket-client-0.32.0-116.el7.noarch
libverto-0.2.5-4.el7.x86_64
python-2.7.5-86.el7.x86_64
initscripts-9.49.41-1.el7_5.1.x86_64
openssl-static-1.0.2k-19.el7.x86_64
rpcbind-0.2.0-44.el7.x86_64
libnet-1.1.6-7.el7.x86_64
python2-rpm-macros-3-32.el7.noarch
dhcp-libs-4.2.5-68.el7.centos.1.x86_64
oci-register-machine-0-6.git2b44233.el7.x86_64
dbus-python-1.1.1-9.el7.x86_64
dhclient-4.2.5-68.el7.centos.1.x86_64
container-storage-setup-0.11.0-2.git5eaf76c.el7.noarch
postgresql-9.2.24-4.el7_8.x86_64
subscription-manager-rhsm-certificates-1.20.11-1.el7.centos.x86_64
mod_ssl-2.4.6-93.el7.centos.x86_64
grub2-pc-2.02-0.65.el7.centos.2.x86_64
python-urllib3-1.10.2-5.el7.noarch
krb5-workstation-1.15.1-46.el7.x86_64
NetworkManager-1.10.2-16.el7_5.x86_64
gnutls-3.3.26-9.el7.x86_64
python-pytoml-0.1.14-1.git7dea353.el7.noarch
pyliblzma-0.5.3-11.el7.x86_64
cronie-1.4.11-19.el7.x86_64
docker-latest-1.13.1-58.git87f2fab.el7.centos.x86_64
plymouth-scripts-0.8.9-0.31.20140113.el7.centos.x86_64
docker-novolume-plugin-1.13.1-74.git6e3bb8e.el7.centos.x86_64
libdb-5.3.21-24.el7.i686
python-docker-py-1.10.6-4.el7.noarch
libattr-2.4.46-13.el7.i686
docker-latest-v1.10-migrator-1.13.1-58.git87f2fab.el7.centos.x86_64
os-prober-1.58-9.el7.x86_64
tigervnc-server-1.8.0-5.el7.x86_64
bind-license-9.9.4-61.el7_5.1.noarch
NetworkManager-ppp-1.10.2-16.el7_5.x86_64
quota-nls-4.01-17.el7.noarch
open-vm-tools-10.1.10-3.el7_5.1.x86_64
kbd-legacy-1.15.5-13.el7.noarch
rdma-core-15-7.el7_5.x86_64
net-tools-2.0-0.22.20131004git.el7.x86_64
iwl135-firmware-18.168.6.1-62.2.el7_5.noarch
gpgme-1.3.2-5.el7.x86_64
rsyslog-8.24.0-16.el7_5.4.x86_64
iwl1000-firmware-39.31.5.1-62.2.el7_5.noarch
parted-3.1-29.el7.x86_64
iwl3945-firmware-15.32.2.9-62.2.el7_5.noarch
libtevent-0.9.33-2.el7.x86_64
iwl6000g2a-firmware-17.168.5.3-62.2.el7_5.noarch
bind-utils-9.9.4-61.el7_5.1.x86_64
nss-softokn-freebl-3.36.0-5.el7_5.i686
kernel-3.10.0-514.2.2.el7.x86_64
alsa-lib-1.1.4.1-2.el7.x86_64
nfs4-acl-tools-0.3.3-17.el7.x86_64
info-5.1-5.el7.x86_64
polkit-pkla-compat-0.1-4.el7.x86_64
rdma-core-15-7.el7_5.i686
readline-6.2-10.el7.x86_64
libsepol-2.5-10.el7.x86_64
libcap-2.22-9.el7.x86_64
libICE-1.0.9-9.el7.x86_64
m4-1.4.16-10.el7.x86_64
pcre-8.32-17.el7.x86_64
libcom_err-devel-1.42.9-13.el7.x86_64
libtool-ltdl-2.4.2-22.el7_3.x86_64
fxload-2002_04_11-16.el7.x86_64
libgomp-4.8.5-36.el7_6.2.x86_64
gmp-6.0.0-15.el7.x86_64
keyutils-libs-devel-1.5.8-3.el7.x86_64
ethtool-4.8-7.el7.x86_64
libxcb-1.12-1.el7.x86_64
gcc-4.8.5-36.el7_6.2.x86_64
libXfixes-5.0.3-1.el7.x86_64
elfutils-libelf-devel-0.172-2.el7.x86_64
ca-certificates-2018.2.22-70.0.el7_5.noarch
libselinux-utils-2.5-14.1.el7.x86_64
libfontenc-1.1.3-3.el7.x86_64
elfutils-libelf-0.172-2.el7.i686
libXrandr-1.5.1-2.el7.x86_64
libverto-tevent-0.2.5-4.el7.x86_64
libgcc-4.8.5-36.el7_6.2.i686
acl-2.2.51-14.el7.x86_64
dejavu-fonts-common-2.33-6.el7.noarch
kernel-3.10.0-327.el7.x86_64
libevent-2.0.21-4.el7.x86_64
fontconfig-2.13.0-4.3.el7.x86_64
postfix-2.10.1-6.el7.x86_64
basesystem-10.0-7.el7.centos.noarch
gd-2.0.35-26.el7.x86_64
libdnet-1.12-13.1.el7.x86_64
glibc-static-2.17-260.el7_6.6.x86_64
aic94xx-firmware-30-6.el7.noarch
mesa-libglapi-18.0.5-4.el7_6.x86_64
libicu-50.1.2-15.el7.x86_64
mesa-libGL-18.0.5-4.el7_6.x86_64
perl-parent-0.225-244.el7.noarch
libwayland-server-1.15.0-1.el7.x86_64
perl-podlators-2.5.1-3.el7.noarch
atk-2.28.1-1.el7.x86_64
passwd-0.79-4.el7.x86_64
harfbuzz-1.7.5-2.el7.x86_64
perl-Text-ParseWords-3.29-4.el7.noarch
cups-libs-1.6.3-35.el7.x86_64
perl-Storable-2.45-3.el7.x86_64
libtiff-4.0.3-27.el7_3.x86_64
libsysfs-2.1.0-16.el7.x86_64
sed-4.2.2-5.el7.x86_64
perl-constant-1.27-2.el7.noarch
gtk-update-icon-cache-3.22.30-3.el7.x86_64
perl-Socket-2.010-4.el7.x86_64
libXft-2.3.2-2.el7.x86_64
popt-1.13-16.el7.x86_64
perl-Time-HiRes-1.9725-3.el7.x86_64
libXcomposite-0.4.4-4.1.el7.x86_64
perl-Scalar-List-Utils-1.27-248.el7.x86_64
libwayland-client-1.15.0-1.el7.x86_64
mesa-libEGL-18.0.5-4.el7_6.x86_64
ivtv-firmware-20080701-26.el7.noarch
perl-File-Temp-0.23.01-3.el7.noarch
pango-1.42.4-2.el7_6.x86_64
perl-threads-shared-1.43-6.el7.x86_64
tigervnc-server-minimal-1.8.0-13.el7.x86_64
libgpg-error-1.12-3.el7.x86_64
perl-Filter-1.49-3.el7.x86_64
rpm-4.11.3-35.el7.x86_64
rpm-build-libs-4.11.3-35.el7.x86_64
libSM-1.2.2-2.el7.x86_64
apr-1.4.8-3.el7_4.1.x86_64
gpg-pubkey-f4a80eb5-53a7ff4b
boost-system-1.53.0-27.el7.x86_64
libjpeg-turbo-1.2.90-5.el7.x86_64
zip-3.0-11.el7.x86_64
perl-Error-0.17020-2.el7.noarch
sqlite-3.7.17-8.el7.x86_64
boost-thread-1.53.0-27.el7.x86_64
diffutils-3.3-4.el7.x86_64
libquadmath-devel-4.8.5-36.el7_6.2.x86_64
libcap-ng-0.7.5-4.el7.x86_64
libstdc++-devel-4.8.5-36.el7_6.2.x86_64
xorg-x11-xauth-1.0.9-1.el7.x86_64
libdwarf-20130207-4.el7.x86_64
systemtap-runtime-3.3-3.el7.x86_64
neon-0.30.0-3.el7.x86_64
libXinerama-1.1.3-2.1.el7.x86_64
dwz-0.11-3.el7.x86_64
groff-base-1.22.2-8.el7.x86_64
git-1.8.3.1-20.el7.x86_64
xorg-x11-xkb-utils-7.7-12.el7.x86_64
efivar-libs-36-11.el7_6.1.x86_64
systemtap-client-3.3-3.el7.x86_64
slang-2.2.4-11.el7.x86_64
perl-Data-Dumper-2.145-3.el7.x86_64
expat-2.1.0-10.el7_3.x86_64
sysvinit-tools-2.88-14.dsf.el7.x86_64
perl-srpm-macros-1-8.el7.noarch
tcp_wrappers-libs-7.6-77.el7.x86_64
gettext-common-devel-0.19.8.1-2.el7.noarch
gdb-7.6.1-114.el7.x86_64
automake-1.13.4-3.el7.noarch
file-5.11-33.el7.x86_64
perl-XML-Parser-2.41-10.el7.x86_64
gdbm-1.10-8.el7.x86_64
systemtap-devel-3.3-3.el7.x86_64
libxml2-2.9.1-6.el7_2.3.x86_64
wget-1.14-15.el7_4.1.x86_64
intltool-0.50.2-7.el7.noarch
xz-5.2.2-1.el7.x86_64
libtool-2.4.2-22.el7_3.x86_64
subversion-1.7.14-14.el7.x86_64
gcc-gfortran-4.8.5-36.el7_6.2.x86_64
rpm-sign-4.11.3-35.el7.x86_64
audit-libs-2.8.1-3.el7_5.1.x86_64
swig-2.0.10-5.el7.x86_64
pinentry-0.8.1-17.el7.x86_64
libsemanage-2.5-11.el7.x86_64
patchutils-0.3.3-4.el7.x86_64
mpfr-3.1.1-4.el7.x86_64
rcs-5.9.0-5.el7.x86_64
libmpc-1.0.1-3.el7.x86_64
ctags-5.8-13.el7.x86_64
policycoreutils-2.5-22.el7.x86_64
sudo-1.8.23-4.el7_7.1.x86_64
yajl-2.0.4-4.el7.x86_64
nmap-ncat-6.40-19.el7.x86_64
oci-systemd-hook-0.1.17-2.git83283a0.el7.x86_64
words-3.0-22.el7.noarch
python-docker-pycreds-1.10.6-4.el7.noarch
audit-libs-python-2.8.1-3.el7_5.1.x86_64
python-libs-2.7.5-86.el7.x86_64
setools-libs-3.3.8-2.el7.x86_64
openssl-libs-1.0.2k-19.el7.x86_64
protobuf-c-1.0.2-3.el7.x86_64
openssl-devel-1.0.2k-19.el7.x86_64
libcgroup-0.41-15.el7.x86_64
openssl-perl-1.0.2k-19.el7.x86_64
criu-3.5-4.el7.x86_64
python-rpm-macros-3-32.el7.noarch
PyYAML-3.10-11.el7.x86_64
python-devel-2.7.5-86.el7.x86_64
libssh2-1.4.3-10.el7_2.1.x86_64
python-decorator-3.4.0-3.el7.noarch
python-chardet-2.2.1-1.el7_1.noarch
mailcap-2.1.41-2.el7.noarch
cracklib-dicts-2.9.0-11.el7.x86_64
skopeo-containers-0.1.31-1.dev.gitae64ff7.el7.centos.x86_64
python-IPy-0.75-6.el7.noarch
postgresql-libs-9.2.24-4.el7_8.x86_64
container-selinux-2.68-1.el7.noarch
postgresql-server-9.2.24-4.el7_8.x86_64
python-backports-1.0-8.el7.x86_64
httpd-2.4.6-93.el7.centos.x86_64
python-setuptools-0.9.8-7.el7.noarch
krb5-libs-1.15.1-46.el7.x86_64
python-requests-2.6.0-1.el7_1.noarch
krb5-devel-1.15.1-46.el7.x86_64
autogen-libopts-5.18-5.el7.x86_64
python-iniparse-0.4-9.el7.noarch
ntp-4.2.6p5-29.el7.centos.2.x86_64
python-configobj-4.7.2-7.el7.noarch
golang-bin-1.9.4-1.el7.x86_64
yum-metadata-parser-1.1.4-10.el7.x86_64
atomic-registries-1.22.1-22.git5a342e3.el7.x86_64
pyxattr-0.5.1-5.el7.x86_64
docker-client-latest-1.13.1-58.git87f2fab.el7.centos.x86_64
docker-client-1.13.1-74.git6e3bb8e.el7.centos.x86_64
libutempter-1.1.6-4.el7.x86_64
docker-logrotate-1.13.1-74.git6e3bb8e.el7.centos.x86_64
docker-lvm-plugin-1.13.1-74.git6e3bb8e.el7.centos.x86_64
docker-devel-1.3.2-4.el7.centos.x86_64
docker-unit-test-1.13.1-68.gitdded712.el7.centos.x86_64
docker-distribution-2.6.2-2.git48294d9.el7.x86_64
docker-forward-journald-1.10.3-44.el7.centos.x86_64
grub2-common-2.02-0.65.el7.centos.2.noarch
grub2-pc-modules-2.02-0.65.el7.centos.2.noarch
firewalld-filesystem-0.4.4.4-14.el7.noarch
mesa-filesystem-17.2.3-8.20171019.el7.x86_64
xkeyboard-config-2.20-1.el7.noarch
linux-firmware-20180220-62.2.git6d51311.el7_5.noarch
kbd-misc-1.15.5-13.el7.noarch
iwl105-firmware-18.168.6.1-62.2.el7_5.noarch
hardlink-1.0-19.el7.x86_64
iwl6000-firmware-9.221.4.1-62.2.el7_5.noarch
iwl2000-firmware-18.168.6.1-62.2.el7_5.noarch
pygpgme-0.3-9.el7.x86_64
iwl5150-firmware-8.24.2.2-62.2.el7_5.noarch
iwl7260-firmware-22.0.7.0-62.2.el7_5.noarch
iwl6050-firmware-41.28.5.1-62.2.el7_5.noarch
iwl100-firmware-39.31.5.1-62.2.el7_5.noarch
iwl7265-firmware-22.0.7.0-62.2.el7_5.noarch
iwl5000-firmware-8.83.5.1_1-62.2.el7_5.noarch
libgcc-4.8.5-36.el7_6.2.x86_64
crontabs-1.11-6.20121102git.el7.noarch
glibc-2.17-260.el7_6.6.x86_64
libselinux-2.5-14.1.el7.x86_64
zlib-1.2.7-18.el7.x86_64
elfutils-libelf-0.172-2.el7.x86_64
cpp-4.8.5-36.el7_6.2.x86_64
libss-1.42.9-13.el7.x86_64
libsepol-devel-2.5-10.el7.x86_64
alsa-firmware-1.0.28-2.el7.noarch
glibc-headers-2.17-260.el7_6.6.x86_64
perl-WWW-Curl-4.15-13.el7.x86_64
libpipeline-1.2.3-3.el7.x86_64
libverto-devel-0.2.5-4.el7.x86_64
libselinux-devel-2.5-14.1.el7.x86_64
json-c-0.11-4.el7_0.x86_64
e2fsprogs-1.42.9-13.el7.x86_64
bison-3.0.4-2.el7.x86_64
elfutils-libs-0.172-2.el7.x86_64
libselinux-python-2.5-14.1.el7.x86_64
bc-1.06.95-13.el7.x86_64
zlib-1.2.7-18.el7.i686
libsepol-2.5-10.el7.i686
elfutils-libs-0.172-2.el7.i686
libpng-1.5.13-7.el7_2.x86_64
libdb-utils-5.3.21-24.el7.x86_64
coreutils-8.22-21.el7.x86_64
centos-release-7-5.1804.4.el7.centos.x86_64
gzip-1.5-10.el7.x86_64
setup-2.8.71-9.el7.noarch
libtirpc-0.2.4-0.10.el7.x86_64
gettext-0.19.8.1-2.el7.x86_64
python-slip-0.4.0-4.el7.noarch
python-linux-procfs-0.4.9-3.el7.noarch
gsettings-desktop-schemas-3.24.1-2.el7_5.x86_64
python-gobject-base-3.22.0-1.el7_4.1.x86_64
grubby-8.28-23.el7.x86_64
nss-3.36.0-5.el7_5.x86_64
nss-tools-3.36.0-5.el7_5.x86_64
binutils-2.27-28.base.el7_5.1.x86_64
logrotate-3.8.6-15.el7.x86_64
fipscheck-1.4.1-6.el7.x86_64
xmlsec1-openssl-1.2.20-7.el7_4.x86_64
cyrus-sasl-lib-2.1.26-23.el7.x86_64
curl-7.29.0-46.el7.x86_64
libnfsidmap-0.25-19.el7.x86_64
yum-plugin-fastestmirror-1.1.31-46.el7_5.noarch
device-mapper-persistent-data-0.7.3-3.el7.x86_64
llvm-private-5.0.0-3.el7.x86_64
libmspack-0.5-0.5.alpha.el7.x86_64
libini_config-1.3.1-29.el7.x86_64
perl-libs-5.16.3-292.el7.x86_64
perl-macros-5.16.3-292.el7.x86_64
lsscsi-0.27-6.el7.x86_64
numactl-libs-2.0.9-7.el7.x86_64
libpcap-1.5.3-11.el7.x86_64
libXdmcp-1.1.2-6.el7.x86_64
ipset-6.29-1.el7.x86_64
libnetfilter_conntrack-1.0.6-1.el7_3.x86_64
iptables-1.4.21-24.1.el7_5.x86_64
libgpg-error-1.12-3.el7.i686
libgcrypt-1.5.3-14.el7.i686
pcre-8.32-17.el7.i686
libcap-ng-0.7.5-4.el7.i686
libpwquality-1.2.3-5.el7.x86_64
libuser-0.60-9.el7.x86_64
procps-ng-3.3.10-17.el7_5.2.x86_64
device-mapper-1.02.146-4.el7.x86_64
cryptsetup-libs-1.7.4-4.el7.x86_64
kmod-20-21.el7.x86_64
systemd-libs-219-57.el7_5.1.x86_64
systemd-219-57.el7_5.1.x86_64
elfutils-default-yama-scope-0.170-4.el7.noarch
iputils-20160308-10.el7.x86_64
grub2-tools-minimal-2.02-0.65.el7.centos.2.x86_64
grub2-tools-2.02-0.65.el7.centos.2.x86_64
polkit-0.112-14.el7.x86_64
pciutils-3.5.1-3.el7.x86_64
NetworkManager-libnm-1.10.2-16.el7_5.x86_64
dhcp-common-4.2.5-68.el7.centos.1.x86_64
dracut-network-033-535.el7_5.1.x86_64
libdrm-2.4.83-2.el7.x86_64
mesa-dri-drivers-17.2.3-8.20171019.el7.x86_64
grub2-tools-extra-2.02-0.65.el7.centos.2.x86_64
device-mapper-event-1.02.146-4.el7.x86_64
wpa_supplicant-2.6-9.el7.x86_64
libndp-1.2-7.el7.x86_64
gssproxy-0.7.0-17.el7.x86_64
trousers-0.3.14-2.el7.x86_64
glib-networking-2.50.0-1.el7.x86_64
cronie-anacron-1.4.11-19.el7.x86_64
teamd-1.27-4.el7.x86_64
plymouth-core-libs-0.8.9-0.31.20140113.el7.centos.x86_64
plymouth-0.8.9-0.31.20140113.el7.centos.x86_64
virt-what-1.18-4.el7.x86_64
pam-1.1.8-22.el7.i686
tuned-2.9.0-1.el7_5.2.noarch
NetworkManager-team-1.10.2-16.el7_5.x86_64
libsoup-2.56.0-6.el7.x86_64
nfs-utils-1.3.0-0.54.el7.x86_64
NetworkManager-tui-1.10.2-16.el7_5.x86_64
grub2-2.02-0.65.el7.centos.2.x86_64
kexec-tools-2.0.15-13.el7_5.1.x86_64
openssh-server-7.4p1-16.el7.x86_64
kernel-3.10.0-862.11.6.el7.x86_64
dnsmasq-2.76-5.el7.x86_64
rsync-3.1.2-4.el7.x86_64
python-pycurl-7.19.0-19.el7.x86_64
irqbalance-1.0.7-11.el7.x86_64
microcode_ctl-2.1-29.16.el7_5.x86_64
dracut-config-rescue-033-535.el7_5.1.x86_64
tcpdump-4.9.2-3.el7.x86_64
iprutils-2.4.15.1-1.el7.x86_64
kernel-tools-3.10.0-862.11.6.el7.x86_64
bash-4.2.46-30.el7.x86_64
xfsprogs-4.5.0-15.el7.x86_64
nss-util-3.36.0-1.el7_5.x86_64
mariadb-libs-5.5.60-1.el7_5.x86_64
ncurses-libs-5.9-14.20130511.el7_4.x86_64
libxkbfile-1.0.9-3.el7.x86_64
libuuid-2.23.2-52.el7_5.1.x86_64
mesa-private-llvm-3.9.1-3.el7.x86_64
chkconfig-1.7.4-1.el7.x86_64
systemd-libs-219-57.el7_5.1.i686
gawk-4.0.2-4.el7_3.1.x86_64
libattr-2.4.46-13.el7.x86_64
alsa-tools-firmware-1.1.0-1.el7.x86_64
libacl-2.2.51-14.el7.x86_64
libnl3-3.2.28-4.el7.x86_64
p11-kit-0.23.5-3.el7.x86_64
grep-2.20-3.el7.x86_64
pciutils-libs-3.5.1-3.el7.x86_64
xmlsec1-1.2.20-7.el7_4.x86_64
tar-1.26-34.el7.x86_64
nss-softokn-freebl-3.36.0-5.el7_5.x86_64
libbasicobjects-0.1.1-29.el7.x86_64
kmod-libs-20-21.el7.x86_64
libX11-1.6.5-1.el7.x86_64
libXi-1.7.9-1.el7.x86_64
libXxf86vm-1.1.4-1.el7.x86_64
p11-kit-trust-0.23.5-3.el7.x86_64
libref_array-0.1.5-29.el7.x86_64
lz4-1.7.5-2.el7.x86_64
libXfont2-2.0.1-2.el7.x86_64
libXtst-1.2.3-1.el7.x86_64
libXt-1.1.5-3.el7.x86_64
libteam-1.27-4.el7.x86_64
vim-minimal-7.4.160-4.el7.x86_64
tcp_wrappers-7.6-77.el7.x86_64
dejavu-sans-fonts-2.33-6.el7.noarch
ncurses-5.9-14.20130511.el7_4.x86_64
glibc-utils-2.17-260.el7_6.6.x86_64
libblkid-2.23.2-52.el7_5.1.x86_64
libglvnd-1.0.1-0.8.git5baa1e5.el7.x86_64
shared-mime-info-1.8-4.el7.x86_64
mesa-libgbm-18.0.5-4.el7_6.x86_64
libcroco-0.6.11-1.el7.x86_64
perl-Pod-Perldoc-3.20-4.el7.noarch
jasper-libs-1.900.1-33.el7.x86_64
gettext-libs-0.19.8.1-2.el7.x86_64
perl-Pod-Usage-1.63-3.el7.noarch
gdk-pixbuf2-2.36.12-3.el7.x86_64
python-slip-dbus-0.4.0-4.el7.noarch
perl-Time-Local-1.2300-2.el7.noarch
libthai-0.1.14-9.el7.x86_64
gobject-introspection-1.50.0-1.el7.x86_64
perl-PathTools-3.40-5.el7.x86_64
libglvnd-egl-1.0.1-0.8.git5baa1e5.el7.x86_64
nss-pem-1.0.3-4.el7.x86_64
perl-Pod-Simple-3.28-4.el7.noarch
gtk2-2.24.31-1.el7.x86_64
perl-threads-1.87-4.el7.x86_64
rpm-libs-4.11.3-35.el7.x86_64
fipscheck-lib-1.4.1-6.el7.x86_64
apr-util-1.5.2-6.el7.x86_64
bind-libs-9.9.4-61.el7_5.1.x86_64
libxshmfence-1.2-1.el7.x86_64
patch-2.7.1-10.el7_5.x86_64
libXext-1.3.3-3.el7.x86_64
libgfortran-4.8.5-36.el7_6.2.x86_64
gnupg2-2.0.22-5.el7_5.x86_64
libidn-1.28-4.el7.x86_64
elfutils-0.172-2.el7.x86_64
yum-3.4.3-158.el7.centos.noarch
pakchois-0.4-10.el7.x86_64
libproxy-0.4.11-11.el7.x86_64
libXxf86misc-1.0.3-7.1.el7.x86_64
perl-TermReadKey-2.30-20.el7.x86_64
kernel-tools-libs-3.10.0-862.11.6.el7.x86_64
libunistring-0.9.3-9.el7.x86_64
mokutil-15-2.el7.centos.x86_64
perl-5.16.3-292.el7.x86_64
pixman-0.34.0-1.el7.x86_64
newt-0.52.15-4.el7.x86_64
autoconf-2.69-11.el7.noarch
libtalloc-2.1.10-1.el7.x86_64
file-libs-5.11-33.el7.x86_64
libdaemon-0.14-7.el7.x86_64
gettext-devel-0.19.8.1-2.el7.x86_64
ipset-libs-6.29-1.el7.x86_64
keyutils-libs-1.5.8-3.el7.x86_64
emacs-filesystem-24.3-22.el7.noarch
less-458-9.el7.x86_64
systemtap-3.3-3.el7.x86_64
xz-libs-5.2.2-1.el7.i686
libffi-3.0.13-18.el7.x86_64
pkgconfig-0.27.1-4.el7.x86_64
rpm-build-4.11.3-35.el7.x86_64
rpm-python-4.11.3-35.el7.x86_64
lz4-1.7.5-2.el7.i686
diffstat-1.57-4.el7.x86_64
pam-1.1.8-22.el7.x86_64
libseccomp-2.3.1-3.el7.x86_64
GeoIP-1.5.0-11.el7.x86_64
byacc-1.9.20130304-3.el7.x86_64
kpartx-0.4.9-119.el7_5.1.x86_64
make-3.82-23.el7.x86_64
telnet-0.17-64.el7.x86_64
dracut-033-535.el7_5.1.x86_64
oci-umount-2.3.3-3.gite3c9055.el7.x86_64
libmodman-2.0.1-8.el7.x86_64
dbus-libs-1.10.24-7.el7.x86_64
libsemanage-python-2.5-11.el7.x86_64
shadow-utils-4.1.5.1-24.el7.x86_64
ustr-1.0.4-16.el7.x86_64
systemd-sysv-219-57.el7_5.1.x86_64
openssl-1.0.2k-19.el7.x86_64
device-mapper-event-libs-1.02.146-4.el7.x86_64
checkpolicy-2.5-6.el7.x86_64
python-srpm-macros-3-32.el7.noarch
hwdata-0.252-8.8.el7.x86_64
libyaml-0.1.4-11.el7_0.x86_64
cracklib-2.9.0-11.el7.x86_64
python-virtualenv-15.1.0-4.el7_7.noarch
openssh-7.4p1-16.el7.x86_64
golang-src-1.9.4-1.el7.noarch
libpciaccess-0.14-1.el7.x86_64
policycoreutils-python-2.5-22.el7.x86_64
httpd-tools-2.4.6-93.el7.centos.x86_64
quota-4.01-17.el7.x86_64
python-backports-ssl_match_hostname-3.5.0.1-1.el7.noarch
centos-logos-70.0.6-3.el7.centos.noarch
libkadm5-1.15.1-46.el7.x86_64
lvm2-libs-2.02.177-4.el7.x86_64
kernel-headers-3.10.0-862.11.6.el7.x86_64
ntpdate-4.2.6p5-29.el7.centos.2.x86_64
ebtables-2.0.10-16.el7.x86_64
golang-1.9.4-1.el7.x86_64
newt-python-0.52.15-4.el7.x86_64
docker-common-1.13.1-74.git6e3bb8e.el7.centos.x86_64
avahi-libs-0.6.31-19.el7.x86_64
docker-1.13.1-74.git6e3bb8e.el7.centos.x86_64
python-pyudev-0.15-9.el7.noarch
docker-latest-logrotate-1.13.1-58.git87f2fab.el7.centos.x86_64
bzip2-libs-1.0.6-13.el7.i686
audit-2.8.1-3.el7_5.1.x86_64
avahi-autoipd-0.6.31-19.el7.x86_64
docker-v1.10-migrator-1.13.1-74.git6e3bb8e.el7.centos.x86_64
firewalld-0.4.4.4-14.el7.noarch
libX11-common-1.6.5-1.el7.noarch
lvm2-2.02.177-4.el7.x86_64
ncurses-base-5.9-14.20130511.el7_4.noarch
openssh-clients-7.4p1-16.el7.x86_64
tigervnc-license-1.8.0-5.el7.noarch
kbd-1.15.5-13.el7.x86_64
tzdata-2018e-3.el7.noarch
pth-2.0.7-23.el7.x86_64
biosdevname-0.7.3-1.el7.x86_64
iwl3160-firmware-22.0.7.0-62.2.el7_5.noarch
python-urlgrabber-3.10-8.el7.noarch
libgudev1-219-57.el7_5.1.x86_64
iwl4965-firmware-228.61.2.24-62.2.el7_5.noarch
libmnl-1.0.3-7.el7.x86_64
authconfig-6.2.8-30.el7.x86_64
iwl2030-firmware-18.168.6.1-62.2.el7_5.noarch
qrencode-libs-3.4.1-3.el7.x86_64
perl-Pod-Escapes-1.04-292.el7.noarch
iwl6000g2b-firmware-17.168.5.2-62.2.el7_5.noarch
btrfs-progs-4.9.1-1.el7.x86_64
nspr-4.19.0-1.el7_5.x86_64
libXfont-1.5.2-1.el7.x86_64
libcap-2.22-9.el7.i686
libdb-5.3.21-24.el7.x86_64
glibc-common-2.17-260.el7_6.6.x86_64
libgcrypt-1.5.3-14.el7.x86_64
libcom_err-1.42.9-13.el7.x86_64
cpio-2.11-27.el7.x86_64
ppp-2.4.5-33.el7.x86_64
zlib-devel-1.2.7-18.el7.x86_64
libxslt-1.1.28-5.el7.x86_64
e2fsprogs-libs-1.42.9-13.el7.x86_64
libnl3-cli-3.2.28-4.el7.x86_64
glibc-devel-2.17-260.el7_6.6.x86_64
nss-softokn-3.36.0-5.el7_5.x86_64
libaio-0.3.109-13.el7.x86_64
pcre-devel-8.32-17.el7.x86_64
jansson-2.10-1.el7.x86_64
libXrender-0.9.10-1.el7.x86_64
libestr-0.1.9-2.el7.x86_64
flex-2.5.37-6.el7.x86_64
libtasn1-4.10-1.el7.x86_64
openssl098e-0.9.8e-29.el7.centos.3.x86_64
libcollection-0.7.0-29.el7.x86_64
glibc-2.17-260.el7_6.6.i686
libXcursor-1.1.14-8.el7.x86_64
libselinux-2.5-14.1.el7.i686
xorg-x11-server-utils-7.7-20.el7.x86_64
man-db-2.6.3-9.el7.x86_64
freetype-2.8-12.el7_6.1.x86_64

From: Arora, Manish <Manish.Arora@bsci.com>
Sent: Wednesday, January 20, 2021 1:50 AM
To: Parisi, Justin <Justin.Parisi@netapp.com>; tmac <tmacmd@gmail.com>
Cc: Davis, Kevin <Kevin.Davis@umassmemorial.org>; toasters@teaparty.net
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Thanks Tim and Justin for getting back.

I am still getting same error while configuring XCP 1.6.2.

Retype same password :
# Updating database entries
(pg.InternalError) FATAL: password authentication failed for user "central"

(Background on this error at: http://sqlalche.me/e/2j85)
NOTE: Please make sure you are root user. File Analytics installation unsuccessful. Please refer the user guide.

Also tried with disabling of SELinux but no luck. Internal Firewall service is also disabled. Got CentOS patched from 7.8 to 7.9 but same error.

CentOS Linux release 7.9.2009 (Core)

Our Unix team is not supporting 8.0 version yet, so cant upgrade to that version. Could someone share rpm -qa output from the 7.9 machine where XCP 1.6.2 is working so that I can get that compared?

Regards,
Manish


From: Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>>
Sent: Thursday, January 14, 2021 10:05 AM
To: tmac <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Cc: Arora, Manish <Manish.Arora@bsci.com<mailto:Manish.Arora@bsci.com>>; Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: {External} RE: [EXTERNAL] Re: Is XCP still maintained?

Yea what the IMT piece means is that is the RHEL version that has been tested and qualified.

And it means that support will point to that as the issue rather than troubleshooting the problem (honestly, rightfully so… we didn’t test/qualify RHEL 7)/

From: tmac <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Thursday, January 14, 2021 11:02 AM
To: Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>>
Cc: Arora, Manish <Manish.Arora@bsci.com<mailto:Manish.Arora@bsci.com>>; Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Re: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

For what it is worth: NetApp's IMT shows that 1.6.2 is supported with RHEL8.0
I just tried CENTOS 7.9 with XCP 1.6.2 (no problem):

[tmac@centos7 linux]$ sudo ./xcp activate
XCP 1.6.2; (c) 2021 NetApp, Inc.; Licensed to Tim McCarthy [None] until Thu Mar 4 15:45:00 2021

XCP already activated

[tmac@centos7 linux]$ sudo ./xcp help
USAGE:
xcp [[help] [command]| -version]

optional arguments:
help Show XCP help message and exit
-version Show XCP version number and exit

To see help text, you can run:
xcp help Display this content
xcp help info Step by step usage of all commands
xcp help <command> Individual command help

command:
activate Activate an XCP license on the current host
license Show XCP license information
show Request information from host about NFS exports
scan Read all the files from export path
copy Recursively copy everything from source to target
resume Resume copy operation from the point it was halted
sync Synchronize increment changes on source to target after copy
verify Verify that the target is the same as the source
delete Delete data on the NFS exported volume
[tmac@centos7 linux]$ cat /etc/redhat-release
CentOS Linux release 7.9.2009 (Core)

--tmac

Tim McCarthy, Principal Consultant

Proud Member of the #NetAppATeam<https://twitter.com/NetAppATeam>

I Blog at TMACsRack<https://tmacsrack.wordpress.com/>



On Thu, Jan 14, 2021 at 9:42 AM Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>> wrote:
RHEL 7 works fine with it. I have that running in my environment. (well, CentOS at least)

# xcp
XCP 1.6.1; (c) 2021 NetApp, Inc.; Licensed to Justin Parisi [NetApp Inc] until Mon Mar 22 09:22:27 2021

# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)

The issue is likely related to this:

https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FXCP_-_Cannot_Access_Management_GUI_after_installation

Try the steps in that above and see if it lets you reset the password. Also, make sure things like SELinux and the firewall are disabled:

# sestatus
SELinux status: disabled

# service firewalld status
Redirecting to /bin/systemctl status firewalld.service
? firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:firewalld(1)

The reason they’re pushing you towards RHEL8 is this:

https://mysupport.netapp.com/site/article?lang=en&type=solution&page=%2FAdvice_and_Troubleshooting%2FData_Storage_Software%2FNetApp_XCP%2FInstalling_XCP_File_Analytics_1.6.x_fails_on_RHEL7

From: Arora, Manish <Manish.Arora@bsci.com<mailto:Manish.Arora@bsci.com>>
Sent: Thursday, January 14, 2021 2:18 AM
To: Parisi, Justin <Justin.Parisi@netapp.com<mailto:Justin.Parisi@netapp.com>>; Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

I was recently trying to install XCP 1.6.1 and 1.6.2 on CentOS 7.8 but keep getting error related to “central” user password mismatch while configuring its Analytics part. NetApp support kept saying to try this on RHEL 8 but we don’t have RHEL8 in our environment. Any of you faced same behavior with XCP Analytics install?

Regards
Manish

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Parisi, Justin
Sent: Tuesday, January 12, 2021 9:01 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: {External} RE: [EXTERNAL] Re: Is XCP still maintained?

It’s also officially supported by NetApp now as of version 1.5. That means you can call in for help and development is actively ongoing.

From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> On Behalf Of Davis, Kevin
Sent: Tuesday, January 12, 2021 9:42 AM
To: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: RE: [EXTERNAL] Re: Is XCP still maintained?

NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Thanks brother. I did find it, and realize that I was really just being a knucklehead of enormous proportions.


--
Kevin Davis
Systems Administration | Sr. Storage Engineer | Information Services
UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608
W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org


From: Tim McCarthy <tmacmd@gmail.com<mailto:tmacmd@gmail.com>>
Sent: Tuesday, January 12, 2021 9:27 AM
To: Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>; toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: [EXTERNAL] Re: Is XCP still maintained?

While email attachments are a popular and convenient way to send documents, they are also a common source of viruses. Use caution when opening attachments, even if they appear to have been sent by someone you know.

https://XCP.Netapp.com
It’s all there with links

Get Outlook for iOS<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo0ukef&data=04%7C01%7CKevin.Davis%40umassmemorial.org%7Caa786c4a52024366db2e08d8b7062b50%7C9910941497df4111a54a633909f39003%7C0%7C0%7C637460584868101942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=lvd%2BTKWoX0CLwcAExczG3fMLOMDFwSskra87U63Gerw%3D&reserved=0>
________________________________
From: Toasters <toasters-bounces@teaparty.net<mailto:toasters-bounces@teaparty.net>> on behalf of Davis, Kevin <Kevin.Davis@umassmemorial.org<mailto:Kevin.Davis@umassmemorial.org>>
Sent: Tuesday, January 12, 2021 9:10:05 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net> <toasters@teaparty.net<mailto:toasters@teaparty.net>>
Subject: RE: Is XCP still maintained?


Yup. I was missing something obvious. D’oh!

Given the current state of things here in the good ‘ole USA, I consider my oversight entirely understandable, since my mind really hasn’t been straight since 09/11/2016, and things really got, distracting shall we say, last week.





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org





From: Davis, Kevin
Sent: Tuesday, January 12, 2021 9:07 AM
To: toasters@teaparty.net<mailto:toasters@teaparty.net>
Subject: Is XCP still maintained?



I can no longer find the executable. Searches only deliver support requests or documentation links.

Links such as: https://mysupport.netapp.com/products/p/xcp.html, redirect to https://mysupport.netapp.com/site/downloads, where it’s nowhere to be found.



Yes, I could renew my license. But while searching just to see if the installation files for SMB or the tarball was current, I came up empty.

Am I missing something obvious?





--

Kevin Davis

Systems Administration | Sr. Storage Engineer | Information Services

UMass Memorial Healthcare | 100 Front St. Fl 1, Worcester, MA 01608

W: 508-334-4192 | mailto:kevin.davis@umassmemorial.org






The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, transmission, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.