Mailing List Archive

AT&T Fiber Line / NOT MIS
I have a ATT fiber line for a customer that has a 300/300 circuit, but its not a MIS they are telling me we cannot route a /26 (they have allocated) to my device behind it. ? Any options?


[LTI-Full_175px]
Dennis Burgess

Mikrotik : Trainer, Network Associate, Routing Engineer, Wireless Engineer, Traffic Control Engineer, Inter-Networking Engineer, Security Engineer, Enterprise Wireless Engineer
Hurricane Electric: IPv6 Sage Level
Cambium: ePMP

Author of "Learn RouterOS- Second Edition”
Link Technologies, Inc -- Mikrotik & WISP Support Services
Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/>
Create Wireless Coverage’s with www.towercoverage.com
Need MikroTik Cloud Management: https://cloud.linktechs.net
How did we do today?
[Gold Star]<https://app.customerthermometer.com/?template=log_feedback&hash=5badbac1&embed_data=dGVtcGVyYXR1cmVfaWQ9MSZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>[Green Light]<https://app.customerthermometer.com/?template=log_feedback&hash=675abe04&embed_data=dGVtcGVyYXR1cmVfaWQ9MiZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>[Yellow Light]<https://app.customerthermometer.com/?template=log_feedback&hash=e42b48a5&embed_data=dGVtcGVyYXR1cmVfaWQ9MyZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>[Red Light]<https://app.customerthermometer.com/?template=log_feedback&hash=ecaadcd3&embed_data=dGVtcGVyYXR1cmVfaWQ9NCZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>
Re: AT&T Fiber Line / NOT MIS [ In reply to ]
call back, i dont think that's accurate. What is the specific product?

On Thu, Jun 10, 2021 at 7:25 AM Dennis Burgess <dmburgess@linktechs.net>
wrote:

> I have a ATT fiber line for a customer that has a 300/300 circuit, but its
> not a MIS they are telling me we cannot route a /26 (they have allocated)
> to my device behind it. ? Any options?
>
>
>
>
>
> *[image: LTI-Full_175px]*
>
> *Dennis Burgess*
>
>
> * Mikrotik : **Trainer, Network Associate, Routing Engineer, Wireless
> Engineer, Traffic Control Engineer, Inter-Networking Engineer, Security
> Engineer, Enterprise Wireless Engineer*
>
> *Hurricane Electric: **IPv6 Sage Level*
>
> *Cambium: **ePMP*
>
>
>
> Author of "Learn RouterOS- Second Edition”
>
> *Link Technologies, Inc* -- Mikrotik & WISP Support Services
>
> *Office*: 314-735-0270 Website: http://www.linktechs.net
>
> Create Wireless Coverage’s with www.towercoverage.com
>
> Need MikroTik Cloud Management: https://cloud.linktechs.net
>
> *How did we do today?*
>
> [image: Gold Star]
> <https://app.customerthermometer.com/?template=log_feedback&hash=5badbac1&embed_data=dGVtcGVyYXR1cmVfaWQ9MSZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>[image:
> Green Light]
> <https://app.customerthermometer.com/?template=log_feedback&hash=675abe04&embed_data=dGVtcGVyYXR1cmVfaWQ9MiZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>[image:
> Yellow Light]
> <https://app.customerthermometer.com/?template=log_feedback&hash=e42b48a5&embed_data=dGVtcGVyYXR1cmVfaWQ9MyZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>[image:
> Red Light]
> <https://app.customerthermometer.com/?template=log_feedback&hash=ecaadcd3&embed_data=dGVtcGVyYXR1cmVfaWQ9NCZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>
>
>
>
RE: AT&T Fiber Line / NOT MIS [ In reply to ]
Guess their broadband stuff?


[LTI-Full_175px]
Dennis Burgess

Author of "Learn RouterOS- Second Edition”
Link Technologies, Inc -- Mikrotik & WISP Support Services
Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/>
Create Wireless Coverage’s with www.towercoverage.com
Need MikroTik Cloud Management: https://cloud.linktechs.net

From: TJ Trout <tj@pcguys.us>
Sent: Thursday, June 10, 2021 1:12 PM
To: Dennis Burgess <dmburgess@linktechs.net>
Cc: nanog@nanog.org
Subject: Re: AT&T Fiber Line / NOT MIS

call back, i dont think that's accurate. What is the specific product?

On Thu, Jun 10, 2021 at 7:25 AM Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>> wrote:
I have a ATT fiber line for a customer that has a 300/300 circuit, but its not a MIS they are telling me we cannot route a /26 (they have allocated) to my device behind it. ? Any options?


Dennis Burgess

Mikrotik : Trainer, Network Associate, Routing Engineer, Wireless Engineer, Traffic Control Engineer, Inter-Networking Engineer, Security Engineer, Enterprise Wireless Engineer
Hurricane Electric: IPv6 Sage Level
Cambium: ePMP

Author of "Learn RouterOS- Second Edition”
Link Technologies, Inc -- Mikrotik & WISP Support Services
Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/>
Create Wireless Coverage’s with www.towercoverage.com<http://www.towercoverage.com>
Need MikroTik Cloud Management: https://cloud.linktechs.net
How did we do today?
<https://app.customerthermometer.com/?template=log_feedback&hash=5badbac1&embed_data=dGVtcGVyYXR1cmVfaWQ9MSZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>
Re: AT&T Fiber Line / NOT MIS [ In reply to ]
Yeah not going to happen on U-verse

On Thu, Jun 10, 2021 at 11:32 AM Dennis Burgess <dmburgess@linktechs.net>
wrote:

> Guess their broadband stuff?
>
>
>
>
>
> *[image: LTI-Full_175px]*
>
> *Dennis Burgess*
>
>
> Author of "Learn RouterOS- Second Edition”
>
> *Link Technologies, Inc* -- Mikrotik & WISP Support Services
>
> *Office*: 314-735-0270 Website: http://www.linktechs.net
>
> Create Wireless Coverage’s with www.towercoverage.com
>
> Need MikroTik Cloud Management: https://cloud.linktechs.net
>
>
>
> *From:* TJ Trout <tj@pcguys.us>
> *Sent:* Thursday, June 10, 2021 1:12 PM
> *To:* Dennis Burgess <dmburgess@linktechs.net>
> *Cc:* nanog@nanog.org
> *Subject:* Re: AT&T Fiber Line / NOT MIS
>
>
>
> call back, i dont think that's accurate. What is the specific product?
>
>
>
> On Thu, Jun 10, 2021 at 7:25 AM Dennis Burgess <dmburgess@linktechs.net>
> wrote:
>
> I have a ATT fiber line for a customer that has a 300/300 circuit, but its
> not a MIS they are telling me we cannot route a /26 (they have allocated)
> to my device behind it. ? Any options?
>
>
>
>
>
> *Dennis Burgess*
>
>
> * Mikrotik : **Trainer, Network Associate, Routing Engineer, Wireless
> Engineer, Traffic Control Engineer, Inter-Networking Engineer, Security
> Engineer, Enterprise Wireless Engineer*
>
> *Hurricane Electric: **IPv6 Sage Level*
>
> *Cambium: **ePMP*
>
>
>
> Author of "Learn RouterOS- Second Edition”
>
> *Link Technologies, Inc* -- Mikrotik & WISP Support Services
>
> *Office*: 314-735-0270 Website: http://www.linktechs.net
>
> Create Wireless Coverage’s with www.towercoverage.com
>
> Need MikroTik Cloud Management: https://cloud.linktechs.net
>
> *How did we do today?*
>
>
> <https://app.customerthermometer.com/?template=log_feedback&hash=5badbac1&embed_data=dGVtcGVyYXR1cmVfaWQ9MSZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>
>
>
>
>
Re: AT&T Fiber Line / NOT MIS [ In reply to ]
Bonus points, the small business fiber has extremely limited NAT session
limits (depends on hardware, but not greater than 16,000 sessions) and
*everything *counts. Cold loading CNN.com (an AT&T company) in a default
config without an adblocker will use close to 3000, which will saturate and
cause errors on some of their gateway hardware (NVG595). If you want to use
it for any serious purpose, stick a tunnel out to a real connection.

On Thu, Jun 10, 2021 at 2:43 PM TJ Trout <tj@pcguys.us> wrote:

> Yeah not going to happen on U-verse
>
> On Thu, Jun 10, 2021 at 11:32 AM Dennis Burgess <dmburgess@linktechs.net>
> wrote:
>
>> Guess their broadband stuff?
>>
>>
>>
>>
>>
>> *[image: LTI-Full_175px]*
>>
>> *Dennis Burgess*
>>
>>
>> Author of "Learn RouterOS- Second Edition”
>>
>> *Link Technologies, Inc* -- Mikrotik & WISP Support Services
>>
>> *Office*: 314-735-0270 Website: http://www.linktechs.net
>>
>> Create Wireless Coverage’s with www.towercoverage.com
>>
>> Need MikroTik Cloud Management: https://cloud.linktechs.net
>>
>>
>>
>> *From:* TJ Trout <tj@pcguys.us>
>> *Sent:* Thursday, June 10, 2021 1:12 PM
>> *To:* Dennis Burgess <dmburgess@linktechs.net>
>> *Cc:* nanog@nanog.org
>> *Subject:* Re: AT&T Fiber Line / NOT MIS
>>
>>
>>
>> call back, i dont think that's accurate. What is the specific product?
>>
>>
>>
>> On Thu, Jun 10, 2021 at 7:25 AM Dennis Burgess <dmburgess@linktechs.net>
>> wrote:
>>
>> I have a ATT fiber line for a customer that has a 300/300 circuit, but
>> its not a MIS they are telling me we cannot route a /26 (they have
>> allocated) to my device behind it. ? Any options?
>>
>>
>>
>>
>>
>> *Dennis Burgess*
>>
>>
>> * Mikrotik : **Trainer, Network Associate, Routing Engineer, Wireless
>> Engineer, Traffic Control Engineer, Inter-Networking Engineer, Security
>> Engineer, Enterprise Wireless Engineer*
>>
>> *Hurricane Electric: **IPv6 Sage Level*
>>
>> *Cambium: **ePMP*
>>
>>
>>
>> Author of "Learn RouterOS- Second Edition”
>>
>> *Link Technologies, Inc* -- Mikrotik & WISP Support Services
>>
>> *Office*: 314-735-0270 Website: http://www.linktechs.net
>>
>> Create Wireless Coverage’s with www.towercoverage.com
>>
>> Need MikroTik Cloud Management: https://cloud.linktechs.net
>>
>> *How did we do today?*
>>
>>
>> <https://app.customerthermometer.com/?template=log_feedback&hash=5badbac1&embed_data=dGVtcGVyYXR1cmVfaWQ9MSZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>
>>
>>
>>
>>
Re: AT&T Fiber Line / NOT MIS [ In reply to ]
Ya not wishing to do NAT...

Sent from mobile device..

________________________________
From: Alex Conner <hello@codatory.com>
Sent: Thursday, June 10, 2021 1:49:27 PM
To: TJ Trout <tj@pcguys.us>
Cc: Dennis Burgess <dmburgess@linktechs.net>; nanog@nanog.org <nanog@nanog.org>
Subject: Re: AT&T Fiber Line / NOT MIS

Bonus points, the small business fiber has extremely limited NAT session limits (depends on hardware, but not greater than 16,000 sessions) and everything counts. Cold loading CNN.com (an AT&T company) in a default config without an adblocker will use close to 3000, which will saturate and cause errors on some of their gateway hardware (NVG595). If you want to use it for any serious purpose, stick a tunnel out to a real connection.

On Thu, Jun 10, 2021 at 2:43 PM TJ Trout <tj@pcguys.us<mailto:tj@pcguys.us>> wrote:
Yeah not going to happen on U-verse

On Thu, Jun 10, 2021 at 11:32 AM Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>> wrote:

Guess their broadband stuff?





[LTI-Full_175px]

Dennis Burgess

Author of "Learn RouterOS- Second Edition”

Link Technologies, Inc -- Mikrotik & WISP Support Services

Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/>

Create Wireless Coverage’s with www.towercoverage.com<http://www.towercoverage.com>

Need MikroTik Cloud Management: https://cloud.linktechs.net



From: TJ Trout <tj@pcguys.us<mailto:tj@pcguys.us>>
Sent: Thursday, June 10, 2021 1:12 PM
To: Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>>
Cc: nanog@nanog.org<mailto:nanog@nanog.org>
Subject: Re: AT&T Fiber Line / NOT MIS



call back, i dont think that's accurate. What is the specific product?



On Thu, Jun 10, 2021 at 7:25 AM Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>> wrote:

I have a ATT fiber line for a customer that has a 300/300 circuit, but its not a MIS they are telling me we cannot route a /26 (they have allocated) to my device behind it. ? Any options?





Dennis Burgess

Mikrotik : Trainer, Network Associate, Routing Engineer, Wireless Engineer, Traffic Control Engineer, Inter-Networking Engineer, Security Engineer, Enterprise Wireless Engineer

Hurricane Electric: IPv6 Sage Level

Cambium: ePMP



Author of "Learn RouterOS- Second Edition”

Link Technologies, Inc -- Mikrotik & WISP Support Services

Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/>

Create Wireless Coverage’s with www.towercoverage.com<http://www.towercoverage.com>

Need MikroTik Cloud Management: https://cloud.linktechs.net

How did we do today?

<https://app.customerthermometer.com/?template=log_feedback&hash=5badbac1&embed_data=dGVtcGVyYXR1cmVfaWQ9MSZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>
Re: AT&T Fiber Line / NOT MIS [ In reply to ]
Yep; but even IP Passthrough, routed subnet, etc. all count as NAT sessions
against the internal NAT table.

BTW, that's the feature you're looking for - routed subnet. That will pass
your /26 to another network device over an RFC1918 subnet. The steps depend
on what particular gateway hardware they have, but a quick Google of the
gateway model and "routed subnet" should get you to the right spot.
Assuming of course the other service limitations aren't a dealbreaker.

On Thu, Jun 10, 2021 at 2:54 PM Dennis Burgess <dmburgess@linktechs.net>
wrote:

> Ya not wishing to do NAT...
>
> Sent from mobile device..
>
> ------------------------------
> *From:* Alex Conner <hello@codatory.com>
> *Sent:* Thursday, June 10, 2021 1:49:27 PM
> *To:* TJ Trout <tj@pcguys.us>
> *Cc:* Dennis Burgess <dmburgess@linktechs.net>; nanog@nanog.org <
> nanog@nanog.org>
> *Subject:* Re: AT&T Fiber Line / NOT MIS
>
> Bonus points, the small business fiber has extremely limited NAT session
> limits (depends on hardware, but not greater than 16,000 sessions) and
> *everything *counts. Cold loading CNN.com (an AT&T company) in a default
> config without an adblocker will use close to 3000, which will saturate and
> cause errors on some of their gateway hardware (NVG595). If you want to use
> it for any serious purpose, stick a tunnel out to a real connection.
>
> On Thu, Jun 10, 2021 at 2:43 PM TJ Trout <tj@pcguys.us> wrote:
>
> Yeah not going to happen on U-verse
>
> On Thu, Jun 10, 2021 at 11:32 AM Dennis Burgess <dmburgess@linktechs.net>
> wrote:
>
> Guess their broadband stuff?
>
>
>
>
>
> *[image: LTI-Full_175px]*
>
> *Dennis Burgess*
>
>
> Author of "Learn RouterOS- Second Edition”
>
> *Link Technologies, Inc* -- Mikrotik & WISP Support Services
>
> *Office*: 314-735-0270 Website: http://www.linktechs.net
>
> Create Wireless Coverage’s with www.towercoverage.com
>
> Need MikroTik Cloud Management: https://cloud.linktechs.net
>
>
>
> *From:* TJ Trout <tj@pcguys.us>
> *Sent:* Thursday, June 10, 2021 1:12 PM
> *To:* Dennis Burgess <dmburgess@linktechs.net>
> *Cc:* nanog@nanog.org
> *Subject:* Re: AT&T Fiber Line / NOT MIS
>
>
>
> call back, i dont think that's accurate. What is the specific product?
>
>
>
> On Thu, Jun 10, 2021 at 7:25 AM Dennis Burgess <dmburgess@linktechs.net>
> wrote:
>
> I have a ATT fiber line for a customer that has a 300/300 circuit, but its
> not a MIS they are telling me we cannot route a /26 (they have allocated)
> to my device behind it. ? Any options?
>
>
>
>
>
> *Dennis Burgess*
>
>
> * Mikrotik : **Trainer, Network Associate, Routing Engineer, Wireless
> Engineer, Traffic Control Engineer, Inter-Networking Engineer, Security
> Engineer, Enterprise Wireless Engineer*
>
> *Hurricane Electric: **IPv6 Sage Level*
>
> *Cambium: **ePMP*
>
>
>
> Author of "Learn RouterOS- Second Edition”
>
> *Link Technologies, Inc* -- Mikrotik & WISP Support Services
>
> *Office*: 314-735-0270 Website: http://www.linktechs.net
>
> Create Wireless Coverage’s with www.towercoverage.com
>
> Need MikroTik Cloud Management: https://cloud.linktechs.net
>
> *How did we do today?*
>
>
> <https://app.customerthermometer.com/?template=log_feedback&hash=5badbac1&embed_data=dGVtcGVyYXR1cmVfaWQ9MSZ0aGVybW9tZXRlcl9pZD0xMTM1NjYmbnBzX3JhdGluZz0tMQ==&e=Anonymous&f=Dennis&l=Burgess&c=&c1=&c2=&c3=&c4=&c5=&c6=&c7=&c8=&c9=&c10=>
>
>
>
>
RE: AT&T Fiber Line / NOT MIS [ In reply to ]
Called Cascaded Router configuration on The POS router they gave .. their support and their support “Supervisor” could not make it work. I just did .. FUN.


[LTI-Full_175px]
Dennis Burgess, Mikrotik Certified Trainer
MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE, MTCSE, HE IPv6 Sage, Cambium ePMP Certified
Author of "Learn RouterOS- Second Edition”
Link Technologies, Inc -- Mikrotik & WISP Support Services
Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/>
Create Wireless Coverage’s with www.towercoverage.com

From: Alex Conner <hello@codatory.com>
Sent: Thursday, June 10, 2021 2:01 PM
To: Dennis Burgess <dmburgess@linktechs.net>
Cc: TJ Trout <tj@pcguys.us>; nanog@nanog.org
Subject: Re: AT&T Fiber Line / NOT MIS

Yep; but even IP Passthrough, routed subnet, etc. all count as NAT sessions against the internal NAT table.

BTW, that's the feature you're looking for - routed subnet. That will pass your /26 to another network device over an RFC1918 subnet. The steps depend on what particular gateway hardware they have, but a quick Google of the gateway model and "routed subnet" should get you to the right spot. Assuming of course the other service limitations aren't a dealbreaker.

On Thu, Jun 10, 2021 at 2:54 PM Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>> wrote:
Ya not wishing to do NAT...
Sent from mobile device..

________________________________
From: Alex Conner <hello@codatory.com<mailto:hello@codatory.com>>
Sent: Thursday, June 10, 2021 1:49:27 PM
To: TJ Trout <tj@pcguys.us<mailto:tj@pcguys.us>>
Cc: Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>>; nanog@nanog.org<mailto:nanog@nanog.org> <nanog@nanog.org<mailto:nanog@nanog.org>>
Subject: Re: AT&T Fiber Line / NOT MIS

Bonus points, the small business fiber has extremely limited NAT session limits (depends on hardware, but not greater than 16,000 sessions) and everything counts. Cold loading CNN.com (an AT&T company) in a default config without an adblocker will use close to 3000, which will saturate and cause errors on some of their gateway hardware (NVG595). If you want to use it for any serious purpose, stick a tunnel out to a real connection.

On Thu, Jun 10, 2021 at 2:43 PM TJ Trout <tj@pcguys.us<mailto:tj@pcguys.us>> wrote:
Yeah not going to happen on U-verse

On Thu, Jun 10, 2021 at 11:32 AM Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>> wrote:

Guess their broadband stuff?





Dennis Burgess

Author of "Learn RouterOS- Second Edition”

Link Technologies, Inc -- Mikrotik & WISP Support Services

Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/>

Create Wireless Coverage’s with www.towercoverage.com<http://www.towercoverage.com>

Need MikroTik Cloud Management: https://cloud.linktechs.net



From: TJ Trout <tj@pcguys.us<mailto:tj@pcguys.us>>
Sent: Thursday, June 10, 2021 1:12 PM
To: Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>>
Cc: nanog@nanog.org<mailto:nanog@nanog.org>
Subject: Re: AT&T Fiber Line / NOT MIS



call back, i dont think that's accurate. What is the specific product?



On Thu, Jun 10, 2021 at 7:25 AM Dennis Burgess <dmburgess@linktechs.net<mailto:dmburgess@linktechs.net>> wrote:

I have a ATT fiber line for a customer that has a 300/300 circuit, but its not a MIS they are telling me we cannot route a /26 (they have allocated) to my device behind it. ? Any options?





Dennis Burgess

Mikrotik : Trainer, Network Associate, Routing Engineer, Wireless Engineer, Traffic Control Engineer, Inter-Networking Engineer, Security Engineer, Enterprise Wireless Engineer

Hurricane Electric: IPv6 Sage Level

Cambium: ePMP



Author of "Learn RouterOS- Second Edition”

Link Technologies, Inc -- Mikrotik & WISP Support Services

Office: 314-735-0270 Website: http://www.linktechs.net<http://www.linktechs.net/>

Create Wireless Coverage’s with www.towercoverage.com<http://www.towercoverage.com>

Need MikroTik Cloud Management: https://cloud.linktechs.net

How did we do today?