Mailing List Archive

changing to V33 made Leanfront just spin until port number changed??
When I saw Mythtv v33 release I upgraded one of my Backends and
Mythfrontend worked but when I tested Leanfront it just sat there spinning
until I changed the port number back to 6544?

Is that correct?

Jim A
Re: changing to V33 made Leanfront just spin until port number changed?? [ In reply to ]
On 2/6/23 10:20, James Abernathy wrote:
> When I saw Mythtv v33 release I upgraded one of my Backends and
> Mythfrontend worked but when I tested Leanfront it just sat there
> spinning until I changed the port number back to 6544?
>
> Is that correct?
>
> Jim A
>
>
> _______________________________________________

Port numbers are the same in v33. 6744 is preferred. 6544 is available
but has some things missing, like last play position. I just tested
leanfront with 6744 and it works. You must have some other problem.

Peter

_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://lists.mythtv.org/mailman/listinfo/mythtv-users
http://wiki.mythtv.org/Mailing_List_etiquette
MythTV Forums: https://forum.mythtv.org
Re: changing to V33 made Leanfront just spin until port number changed?? [ In reply to ]
On Mon, Feb 6, 2023 at 9:57 AM Peter Bennett <pb.mythtv@gmail.com> wrote:

>
> On 2/6/23 10:20, James Abernathy wrote:
> > When I saw Mythtv v33 release I upgraded one of my Backends and
> > Mythfrontend worked but when I tested Leanfront it just sat there
> > spinning until I changed the port number back to 6544?
> >
> > Is that correct?
> >
> > Jim A
> >
> >
> > _______________________________________________
>
> Port numbers are the same in v33. 6744 is preferred. 6544 is available
> but has some things missing, like last play position. I just tested
> leanfront with 6744 and it works. You must have some other problem.
>
> Peter
>

After playing with port 6544 awhile, I went back to 6744. This time it's
playing normally. Not spinning

Jim A
Re: changing to V33 made Leanfront just spin until port number changed?? [ In reply to ]
On Mon, Feb 6, 2023 at 11:28 AM James Abernathy <jfabernathy@gmail.com> wrote:
> On Mon, Feb 6, 2023 at 9:57 AM Peter Bennett <pb.mythtv@gmail.com> wrote:
>>
>>
>> On 2/6/23 10:20, James Abernathy wrote:
>> > When I saw Mythtv v33 release I upgraded one of my Backends and
>> > Mythfrontend worked but when I tested Leanfront it just sat there
>> > spinning until I changed the port number back to 6544?
>> >
>> > Is that correct?
>>
>> Port numbers are the same in v33. 6744 is preferred. 6544 is available
>> but has some things missing, like last play position. I just tested
>> leanfront with 6744 and it works. You must have some other problem.
>>
>> Peter
>
>
> After playing with port 6544 awhile, I went back to 6744. This time it's playing normally. Not spinning

I was able to get leanfront working when I went to 6544. 6744 wasn't working.

Is the port in mythtv still set to 6544 and the leanfront set to 6744?
Did you change both?
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://lists.mythtv.org/mailman/listinfo/mythtv-users
http://wiki.mythtv.org/Mailing_List_etiquette
MythTV Forums: https://forum.mythtv.org
Re: changing to V33 made Leanfront just spin until port number changed?? [ In reply to ]
On Fri, Feb 17, 2023 at 11:16 PM Ian Evans <dheianevans@gmail.com> wrote:

> On Mon, Feb 6, 2023 at 11:28 AM James Abernathy <jfabernathy@gmail.com>
> wrote:
> > On Mon, Feb 6, 2023 at 9:57 AM Peter Bennett <pb.mythtv@gmail.com>
> wrote:
> >>
> >>
> >> On 2/6/23 10:20, James Abernathy wrote:
> >> > When I saw Mythtv v33 release I upgraded one of my Backends and
> >> > Mythfrontend worked but when I tested Leanfront it just sat there
> >> > spinning until I changed the port number back to 6544?
> >> >
> >> > Is that correct?
> >>
> >> Port numbers are the same in v33. 6744 is preferred. 6544 is available
> >> but has some things missing, like last play position. I just tested
> >> leanfront with 6744 and it works. You must have some other problem.
> >>
> >> Peter
> >
> >
> > After playing with port 6544 awhile, I went back to 6744. This time it's
> playing normally. Not spinning
>
> I was able to get leanfront working when I went to 6544. 6744 wasn't
> working.
>
> Is the port in mythtv still set to 6544 and the leanfront set to 6744?
> Did you change both?
>

I'm running v33.1 on my backend and Leanfront v0-415 and I'm using port
6744. It's working correctly on my system.

Jim A