Mailing List Archive

[v3] drm/msm/disp/dpu1: add safe lut config in dpu driver
Add safe lut configuration for all the targets in dpu
driver as per QOS recommendation.

Issue reported on SC7280:

With wait-for-safe feature in smmu enabled, RT client
buffer levels are checked to be safe before smmu invalidation.
Since display was always set to unsafe it was delaying the
invalidaiton process thus impacting the performance on NRT clients
such as eMMC and NVMe.

Validated this change on SC7280, With this change eMMC performance
has improved significantly.

Changes in v1:
- Add fixes tag (Sai)
- CC stable kernel (Dimtry)

Changes in v2:
- Correct fixes tag with appropriate hash (stephen)

Fixes: 591e34a091d1 (drm/msm/disp/dpu1: add support for display
for SC7280 target)
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> (sc7280, sc7180)
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index d01c4c9..2e482cd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -974,6 +974,7 @@ static const struct dpu_perf_cfg sdm845_perf_data = {
.amortizable_threshold = 25,
.min_prefill_lines = 24,
.danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff0, 0xf000, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sdm845_qos_linear),
.entries = sdm845_qos_linear
@@ -1001,6 +1002,7 @@ static const struct dpu_perf_cfg sc7180_perf_data = {
.min_dram_ib = 1600000,
.min_prefill_lines = 24,
.danger_lut_tbl = {0xff, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sc7180_qos_linear),
.entries = sc7180_qos_linear
@@ -1028,6 +1030,7 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
.min_dram_ib = 800000,
.min_prefill_lines = 24,
.danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sm8150_qos_linear),
.entries = sm8150_qos_linear
@@ -1056,6 +1059,7 @@ static const struct dpu_perf_cfg sm8250_perf_data = {
.min_dram_ib = 800000,
.min_prefill_lines = 35,
.danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sc7180_qos_linear),
.entries = sc7180_qos_linear
@@ -1084,6 +1088,7 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
.min_dram_ib = 1600000,
.min_prefill_lines = 24,
.danger_lut_tbl = {0xffff, 0xffff, 0x0},
+ .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
.entries = sc7180_qos_macrotile
--
2.7.4
Re: [v3] drm/msm/disp/dpu1: add safe lut config in dpu driver [ In reply to ]
On Wed, Aug 04, 2021 at 01:16:30AM -0700, Kalyan Thota wrote:
> Add safe lut configuration for all the targets in dpu
> driver as per QOS recommendation.
>
> Issue reported on SC7280:
>
> With wait-for-safe feature in smmu enabled, RT client
> buffer levels are checked to be safe before smmu invalidation.
> Since display was always set to unsafe it was delaying the
> invalidaiton process thus impacting the performance on NRT clients
> such as eMMC and NVMe.
>
> Validated this change on SC7280, With this change eMMC performance
> has improved significantly.
>
> Changes in v1:
> - Add fixes tag (Sai)
> - CC stable kernel (Dimtry)
>
> Changes in v2:
> - Correct fixes tag with appropriate hash (stephen)
>
> Fixes: 591e34a091d1 (drm/msm/disp/dpu1: add support for display
> for SC7280 target)
> Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> (sc7280, sc7180)
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
> 1 file changed, 5 insertions(+)

<formletter>

This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>