Hi,
I use tv-viewer to watch tv with my HVR-1900 (it's a USB device). But since a few days I have no sound. Also when playing it directly with mplayer there is no sound.
It does not matter if I use alsa or pulse as audio output. A description of how I got it working can be found here: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1900
dmesg output, when the device is plugged in
===========================================
usb 2-2: new high-speed USB device number 5 using ehci_hcd
usb 2-2: New USB device found, idVendor=2040, idProduct=7300
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: WinTV
usb 2-2: Manufacturer: Hauppauge
usb 2-2: SerialNumber: 7300-00-F06BBD71
pvrusb2: Hardware description: WinTV HVR-1900 Model 73xxx
pvrusb2: Binding ir_rx_z8f0811_haup to i2c address 0x71.
pvrusb2: Binding ir_tx_z8f0811_haup to i2c address 0x70.
cx25840 3-0044: cx25843-24 found @ 0x88 (pvrusb2_a)
pvrusb2: Attached sub-driver cx25840
tuner 3-0042: Tuner -1 found with type(s) Radio TV.
pvrusb2: Attached sub-driver tuner
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tveeprom 3-00a2: Hauppauge model 73219, rev D1F5, serial# 7060849
tveeprom 3-00a2: MAC address is 00:0d:fe:6b:bd:71
tveeprom 3-00a2: tuner model is NXP 18271C2 (idx 155, type 54)
tveeprom 3-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 3-00a2: audio processor is CX25843 (idx 37)
tveeprom 3-00a2: decoder processor is CX25843 (idx 30)
tveeprom 3-00a2: has radio, has IR receiver, has IR transmitter
pvrusb2: Supported video standard(s) reported available in hardware: PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K
pvrusb2: Device initialization completed successfully.
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tda829x 3-0042: setting tuner address to 60
tda18271 3-0060: creating new instance
TDA18271HD/C2 detected @ 3-0060
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
tda829x 3-0042: type set to tda8295+18271
pvrusb2: registered device video1 [mpeg]
DVB: registering new adapter (pvrusb2-dvb)
cx25840 3-0044: 0x0000 is not a valid video input!
DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
tda829x 3-0042: type set to tda8295
tda18271 3-0060: attaching existing instance
Versions
========
media-tv/ivtv-firmware-20080701
media-tv/ivtv-utils-1.4.1
pvrusb2-firmware from: http://steventoth.net/linux/hvr1950/v4l-pvrusb2-73xxx-01.fw
media-video/mplayer-1.1-r1
kernel: 3.5.7-gentoo x86_64
Here is how mplayer is invoked (and its output)
===============================================
/usr/bin/mplayer -vo xv -ao pulse -cache 4096 -dr -double -noslices -stop-xscreensaver -input conf=\"/usr/share/tv-viewer/shortcuts/input.conf\" -osdlevel 0 -nokeepaspect -monitorpixelaspect 1.0 -channels 2 -vf pp=l5,screenshot /dev/video1
MPlayer 1.1-4.5.4 (C) 2000-2012 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
Playing /dev/video1.
Cache fill: 19.92% (835584 bytes)
libavformat version 53.32.100 (external)
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 8000.0 kbps (1000.0 kbyte/s)
Load subtitles in /dev/
Cache not responding! [performance issue]
Cache not responding! [performance issue]
Opening video filter: [screenshot]
Opening video filter: [pp=l5]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 53.61.100 (external)
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 48000 Hz, 2 ch, s16le, 224.0 kbit/14.58% (ratio: 28000->192000)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
[VD_FFMPEG] Trying pixfmt=0.
[PP] Using external postprocessing filter, max q = 6.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=1.
[PP] Using external postprocessing filter, max q = 6.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=2.
[PP] Using external postprocessing filter, max q = 6.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
Unsupported PixelFormat 53
[PP] Using external postprocessing filter, max q = 6.
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
[swscaler @ 0x7fd809231100]BICUBIC scaler, from yuv420p to rgb24 using MMX2
VO: [xv] 720x576 => 768x576 Planar YV12
[mpeg2video @ 0x7fd8088d4a40]ac-tex damaged at 21 0
[mpeg2video @ 0x7fd8088d4a40]Warning MVs not available
[mpeg2video @ 0x7fd8088d4a40]concealing 1620 DC, 1620 AC, 1620 MV errors
A: 54.3 V: 54.3 A-V: 0.000 ct: -0.124 1352/1352 7% 6% 0.3% 1 0 19%
MPlayer interrupted by signal 2 in module: enable_cache
MPlayer interrupted by signal 2 in module: sleep_timer
A: 54.3 V: 54.3 A-V: 0.000 ct: -0.124 1353/1353 7% 7% 0.3% 1 0 19%
Exiting... (Quit)
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users
I use tv-viewer to watch tv with my HVR-1900 (it's a USB device). But since a few days I have no sound. Also when playing it directly with mplayer there is no sound.
It does not matter if I use alsa or pulse as audio output. A description of how I got it working can be found here: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1900
dmesg output, when the device is plugged in
===========================================
usb 2-2: new high-speed USB device number 5 using ehci_hcd
usb 2-2: New USB device found, idVendor=2040, idProduct=7300
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: WinTV
usb 2-2: Manufacturer: Hauppauge
usb 2-2: SerialNumber: 7300-00-F06BBD71
pvrusb2: Hardware description: WinTV HVR-1900 Model 73xxx
pvrusb2: Binding ir_rx_z8f0811_haup to i2c address 0x71.
pvrusb2: Binding ir_tx_z8f0811_haup to i2c address 0x70.
cx25840 3-0044: cx25843-24 found @ 0x88 (pvrusb2_a)
pvrusb2: Attached sub-driver cx25840
tuner 3-0042: Tuner -1 found with type(s) Radio TV.
pvrusb2: Attached sub-driver tuner
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tveeprom 3-00a2: Hauppauge model 73219, rev D1F5, serial# 7060849
tveeprom 3-00a2: MAC address is 00:0d:fe:6b:bd:71
tveeprom 3-00a2: tuner model is NXP 18271C2 (idx 155, type 54)
tveeprom 3-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 3-00a2: audio processor is CX25843 (idx 37)
tveeprom 3-00a2: decoder processor is CX25843 (idx 30)
tveeprom 3-00a2: has radio, has IR receiver, has IR transmitter
pvrusb2: Supported video standard(s) reported available in hardware: PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K
pvrusb2: Device initialization completed successfully.
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tda829x 3-0042: setting tuner address to 60
tda18271 3-0060: creating new instance
TDA18271HD/C2 detected @ 3-0060
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
tda829x 3-0042: type set to tda8295+18271
pvrusb2: registered device video1 [mpeg]
DVB: registering new adapter (pvrusb2-dvb)
cx25840 3-0044: 0x0000 is not a valid video input!
DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
tda829x 3-0042: type set to tda8295
tda18271 3-0060: attaching existing instance
Versions
========
media-tv/ivtv-firmware-20080701
media-tv/ivtv-utils-1.4.1
pvrusb2-firmware from: http://steventoth.net/linux/hvr1950/v4l-pvrusb2-73xxx-01.fw
media-video/mplayer-1.1-r1
kernel: 3.5.7-gentoo x86_64
Here is how mplayer is invoked (and its output)
===============================================
/usr/bin/mplayer -vo xv -ao pulse -cache 4096 -dr -double -noslices -stop-xscreensaver -input conf=\"/usr/share/tv-viewer/shortcuts/input.conf\" -osdlevel 0 -nokeepaspect -monitorpixelaspect 1.0 -channels 2 -vf pp=l5,screenshot /dev/video1
MPlayer 1.1-4.5.4 (C) 2000-2012 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
Playing /dev/video1.
Cache fill: 19.92% (835584 bytes)
libavformat version 53.32.100 (external)
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 8000.0 kbps (1000.0 kbyte/s)
Load subtitles in /dev/
Cache not responding! [performance issue]
Cache not responding! [performance issue]
Opening video filter: [screenshot]
Opening video filter: [pp=l5]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 53.61.100 (external)
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 48000 Hz, 2 ch, s16le, 224.0 kbit/14.58% (ratio: 28000->192000)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
[VD_FFMPEG] Trying pixfmt=0.
[PP] Using external postprocessing filter, max q = 6.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=1.
[PP] Using external postprocessing filter, max q = 6.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=2.
[PP] Using external postprocessing filter, max q = 6.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
Unsupported PixelFormat 53
[PP] Using external postprocessing filter, max q = 6.
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
[swscaler @ 0x7fd809231100]BICUBIC scaler, from yuv420p to rgb24 using MMX2
VO: [xv] 720x576 => 768x576 Planar YV12
[mpeg2video @ 0x7fd8088d4a40]ac-tex damaged at 21 0
[mpeg2video @ 0x7fd8088d4a40]Warning MVs not available
[mpeg2video @ 0x7fd8088d4a40]concealing 1620 DC, 1620 AC, 1620 MV errors
A: 54.3 V: 54.3 A-V: 0.000 ct: -0.124 1352/1352 7% 6% 0.3% 1 0 19%
MPlayer interrupted by signal 2 in module: enable_cache
MPlayer interrupted by signal 2 in module: sleep_timer
A: 54.3 V: 54.3 A-V: 0.000 ct: -0.124 1353/1353 7% 7% 0.3% 1 0 19%
Exiting... (Quit)
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users