Mailing List Archive

[PATCH 3/4] mpi: remove unused i586 and pentium4 assembly
* mpi/config.links: Remove 'i586' from paths.
* mpi/i586*: Remove.
* mpi/pentium4/*: Remove.
--

Current x86 targets (i686) have been defaulting on mpi/i386 assembly
for quite some time now. Remove mpi/i586 as it is no longer used. While
at it, remove mpi/pentium4 assembly also as obsolete.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
---
mpi/config.links | 8 +-
mpi/i586/README | 26 --
mpi/i586/distfiles | 9 -
mpi/i586/mpih-add1.S | 135 ----------
mpi/i586/mpih-lshift.S | 229 -----------------
mpi/i586/mpih-mul1.S | 89 -------
mpi/i586/mpih-mul2.S | 93 -------
mpi/i586/mpih-mul3.S | 93 -------
mpi/i586/mpih-rshift.S | 228 ----------------
mpi/i586/mpih-sub1.S | 142 ----------
mpi/pentium4/README | 115 ---------
mpi/pentium4/distfiles | 3 -
mpi/pentium4/mmx/distfiles | 2 -
mpi/pentium4/mmx/mpih-lshift.S | 457 ---------------------------------
mpi/pentium4/mmx/mpih-rshift.S | 453 --------------------------------
mpi/pentium4/sse2/distfiles | 5 -
mpi/pentium4/sse2/mpih-add1.S | 91 -------
mpi/pentium4/sse2/mpih-mul1.S | 96 -------
mpi/pentium4/sse2/mpih-mul2.S | 136 ----------
mpi/pentium4/sse2/mpih-mul3.S | 127 ---------
mpi/pentium4/sse2/mpih-sub1.S | 112 --------
21 files changed, 4 insertions(+), 2645 deletions(-)
delete mode 100644 mpi/i586/README
delete mode 100644 mpi/i586/distfiles
delete mode 100644 mpi/i586/mpih-add1.S
delete mode 100644 mpi/i586/mpih-lshift.S
delete mode 100644 mpi/i586/mpih-mul1.S
delete mode 100644 mpi/i586/mpih-mul2.S
delete mode 100644 mpi/i586/mpih-mul3.S
delete mode 100644 mpi/i586/mpih-rshift.S
delete mode 100644 mpi/i586/mpih-sub1.S
delete mode 100644 mpi/pentium4/README
delete mode 100644 mpi/pentium4/distfiles
delete mode 100644 mpi/pentium4/mmx/distfiles
delete mode 100644 mpi/pentium4/mmx/mpih-lshift.S
delete mode 100644 mpi/pentium4/mmx/mpih-rshift.S
delete mode 100644 mpi/pentium4/sse2/distfiles
delete mode 100644 mpi/pentium4/sse2/mpih-add1.S
delete mode 100644 mpi/pentium4/sse2/mpih-mul1.S
delete mode 100644 mpi/pentium4/sse2/mpih-mul2.S
delete mode 100644 mpi/pentium4/sse2/mpih-mul3.S
delete mode 100644 mpi/pentium4/sse2/mpih-sub1.S

diff --git a/mpi/config.links b/mpi/config.links
index e4fc4fc4..deb98bf0 100644
--- a/mpi/config.links
+++ b/mpi/config.links
@@ -73,7 +73,7 @@ case "${host}" in
pentiumpro-*-netbsd*)
echo '#define ELF_SYNTAX' >>./mpi/asm-syntax.h
cat $srcdir/mpi/i386/syntax.h >>./mpi/asm-syntax.h
- path="i586 i386"
+ path="i386"
mpi_cpu_arch="x86"
;;
i[34]86*-*-bsdi4*)
@@ -97,7 +97,7 @@ case "${host}" in
echo '#define BSD_SYNTAX' >>./mpi/asm-syntax.h
echo '#define X86_BROKEN_ALIGN' >>./mpi/asm-syntax.h
cat $srcdir/mpi/i386/syntax.h >>./mpi/asm-syntax.h
- path="i586 i386"
+ path="i386"
mpi_cpu_arch="x86"
;;
i[3467]86*-msdosdjgpp* | \
@@ -111,7 +111,7 @@ case "${host}" in
i[567]86*-apple-darwin*)
echo '#define BSD_SYNTAX' >>./mpi/asm-syntax.h
cat $srcdir/mpi/i386/syntax.h >>./mpi/asm-syntax.h
- path="i586 i386"
+ path="i386"
mpi_cpu_arch="x86"
;;
i[3467]86*-*-*)
@@ -125,7 +125,7 @@ case "${host}" in
pentiumpro-*-*)
echo '#define ELF_SYNTAX' >>./mpi/asm-syntax.h
cat $srcdir/mpi/i386/syntax.h >>./mpi/asm-syntax.h
- path="i586 i386"
+ path="i386"
mpi_cpu_arch="x86"
;;
x86_64-apple-darwin*)
diff --git a/mpi/i586/README b/mpi/i586/README
deleted file mode 100644
index d73b0826..00000000
--- a/mpi/i586/README
+++ /dev/null
@@ -1,26 +0,0 @@
-This directory contains mpn functions optimized for Intel Pentium
-processors.
-
-RELEVANT OPTIMIZATION ISSUES
-
-1. Pentium doesn't allocate cache lines on writes, unlike most other modern
-processors. Since the functions in the mpn class do array writes, we have to
-handle allocating the destination cache lines by reading a word from it in the
-loops, to achieve the best performance.
-
-2. Pairing of memory operations requires that the two issued operations refer
-to different cache banks. The simplest way to insure this is to read/write
-two words from the same object. If we make operations on different objects,
-they might or might not be to the same cache bank.
-
-STATUS
-
-1. mpn_lshift and mpn_rshift run at about 6 cycles/limb, but the Pentium
-documentation indicates that they should take only 43/8 = 5.375 cycles/limb,
-or 5 cycles/limb asymptotically.
-
-2. mpn_add_n and mpn_sub_n run at asymptotically 2 cycles/limb. Due to loop
-overhead and other delays (cache refill?), they run at or near 2.5 cycles/limb.
-
-3. mpn_mul_1, mpn_addmul_1, mpn_submul_1 all run 1 cycle faster than they
-should...
diff --git a/mpi/i586/distfiles b/mpi/i586/distfiles
deleted file mode 100644
index 8f821fbf..00000000
--- a/mpi/i586/distfiles
+++ /dev/null
@@ -1,9 +0,0 @@
-mpih-add1.S
-mpih-mul1.S
-mpih-mul2.S
-mpih-mul3.S
-mpih-lshift.S
-mpih-rshift.S
-mpih-sub1.S
-README
-
diff --git a/mpi/i586/mpih-add1.S b/mpi/i586/mpih-add1.S
deleted file mode 100644
index 7436d592..00000000
--- a/mpi/i586/mpih-add1.S
+++ /dev/null
@@ -1,135 +0,0 @@
-/* i80586 add_n -- Add two limb vectors of the same length > 0 and store
- * sum in a third limb vector.
- *
- * Copyright (C) 1992, 1994, 1995, 1996, 1998,
- * 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_add_n( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_ptr_t s2_ptr, (sp + 12)
- * mpi_size_t size) (sp + 16)
- */
-
-.text
- ALIGN (3)
- .globl C_SYMBOL_NAME(_gcry_mpih_add_n)
-C_SYMBOL_NAME(_gcry_mpih_add_n:)
- pushl %edi
- pushl %esi
- pushl %ebx
- pushl %ebp
-
- movl 20(%esp),%edi /* res_ptr */
- movl 24(%esp),%esi /* s1_ptr */
- movl 28(%esp),%ebp /* s2_ptr */
- movl 32(%esp),%ecx /* size */
-
- movl (%ebp),%ebx
-
- decl %ecx
- movl %ecx,%edx
- shrl $3,%ecx
- andl $7,%edx
- testl %ecx,%ecx /* zero carry flag */
- jz Lend
- pushl %edx
-
- ALIGN (3)
-Loop: movl 28(%edi),%eax /* fetch destination cache line */
- leal 32(%edi),%edi
-
-L1: movl (%esi),%eax
- movl 4(%esi),%edx
- adcl %ebx,%eax
- movl 4(%ebp),%ebx
- adcl %ebx,%edx
- movl 8(%ebp),%ebx
- movl %eax,-32(%edi)
- movl %edx,-28(%edi)
-
-L2: movl 8(%esi),%eax
- movl 12(%esi),%edx
- adcl %ebx,%eax
- movl 12(%ebp),%ebx
- adcl %ebx,%edx
- movl 16(%ebp),%ebx
- movl %eax,-24(%edi)
- movl %edx,-20(%edi)
-
-L3: movl 16(%esi),%eax
- movl 20(%esi),%edx
- adcl %ebx,%eax
- movl 20(%ebp),%ebx
- adcl %ebx,%edx
- movl 24(%ebp),%ebx
- movl %eax,-16(%edi)
- movl %edx,-12(%edi)
-
-L4: movl 24(%esi),%eax
- movl 28(%esi),%edx
- adcl %ebx,%eax
- movl 28(%ebp),%ebx
- adcl %ebx,%edx
- movl 32(%ebp),%ebx
- movl %eax,-8(%edi)
- movl %edx,-4(%edi)
-
- leal 32(%esi),%esi
- leal 32(%ebp),%ebp
- decl %ecx
- jnz Loop
-
- popl %edx
-Lend:
- decl %edx /* test %edx w/o clobbering carry */
- js Lend2
- incl %edx
-Loop2:
- leal 4(%edi),%edi
- movl (%esi),%eax
- adcl %ebx,%eax
- movl 4(%ebp),%ebx
- movl %eax,-4(%edi)
- leal 4(%esi),%esi
- leal 4(%ebp),%ebp
- decl %edx
- jnz Loop2
-Lend2:
- movl (%esi),%eax
- adcl %ebx,%eax
- movl %eax,(%edi)
-
- sbbl %eax,%eax
- negl %eax
-
- popl %ebp
- popl %ebx
- popl %esi
- popl %edi
- ret
-
-
diff --git a/mpi/i586/mpih-lshift.S b/mpi/i586/mpih-lshift.S
deleted file mode 100644
index 9d25fe9d..00000000
--- a/mpi/i586/mpih-lshift.S
+++ /dev/null
@@ -1,229 +0,0 @@
-/* i80586 lshift
- *
- * Copyright (C) 1992, 1994, 1998,
- * 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_lshift( mpi_ptr_t wp, (sp + 4)
- * mpi_ptr_t up, (sp + 8)
- * mpi_size_t usize, (sp + 12)
- * unsigned cnt) (sp + 16)
- */
-
-.text
- ALIGN (3)
- .globl C_SYMBOL_NAME(_gcry_mpih_lshift)
-C_SYMBOL_NAME(_gcry_mpih_lshift:)
-
- pushl %edi
- pushl %esi
- pushl %ebx
- pushl %ebp
-
- movl 20(%esp),%edi /* res_ptr */
- movl 24(%esp),%esi /* s_ptr */
- movl 28(%esp),%ebp /* size */
- movl 32(%esp),%ecx /* cnt */
-
-/* We can use faster code for shift-by-1 under certain conditions. */
- cmp $1,%ecx
- jne Lnormal
- leal 4(%esi),%eax
- cmpl %edi,%eax
- jnc Lspecial /* jump if s_ptr + 1 >= res_ptr */
- leal (%esi,%ebp,4),%eax
- cmpl %eax,%edi
- jnc Lspecial /* jump if res_ptr >= s_ptr + size */
-
-Lnormal:
- leal -4(%edi,%ebp,4),%edi
- leal -4(%esi,%ebp,4),%esi
-
- movl (%esi),%edx
- subl $4,%esi
- xorl %eax,%eax
- shldl %cl,%edx,%eax /* compute carry limb */
- pushl %eax /* push carry limb onto stack */
-
- decl %ebp
- pushl %ebp
- shrl $3,%ebp
- jz Lend
-
- movl (%edi),%eax /* fetch destination cache line */
-
- ALIGN (2)
-Loop: movl -28(%edi),%eax /* fetch destination cache line */
- movl %edx,%ebx
-
- movl (%esi),%eax
- movl -4(%esi),%edx
- shldl %cl,%eax,%ebx
- shldl %cl,%edx,%eax
- movl %ebx,(%edi)
- movl %eax,-4(%edi)
-
- movl -8(%esi),%ebx
- movl -12(%esi),%eax
- shldl %cl,%ebx,%edx
- shldl %cl,%eax,%ebx
- movl %edx,-8(%edi)
- movl %ebx,-12(%edi)
-
- movl -16(%esi),%edx
- movl -20(%esi),%ebx
- shldl %cl,%edx,%eax
- shldl %cl,%ebx,%edx
- movl %eax,-16(%edi)
- movl %edx,-20(%edi)
-
- movl -24(%esi),%eax
- movl -28(%esi),%edx
- shldl %cl,%eax,%ebx
- shldl %cl,%edx,%eax
- movl %ebx,-24(%edi)
- movl %eax,-28(%edi)
-
- subl $32,%esi
- subl $32,%edi
- decl %ebp
- jnz Loop
-
-Lend: popl %ebp
- andl $7,%ebp
- jz Lend2
-Loop2: movl (%esi),%eax
- shldl %cl,%eax,%edx
- movl %edx,(%edi)
- movl %eax,%edx
- subl $4,%esi
- subl $4,%edi
- decl %ebp
- jnz Loop2
-
-Lend2: shll %cl,%edx /* compute least significant limb */
- movl %edx,(%edi) /* store it */
-
- popl %eax /* pop carry limb */
-
- popl %ebp
- popl %ebx
- popl %esi
- popl %edi
- ret
-
-/* We loop from least significant end of the arrays, which is only
- permissable if the source and destination don't overlap, since the
- function is documented to work for overlapping source and destination.
-*/
-
-Lspecial:
- movl (%esi),%edx
- addl $4,%esi
-
- decl %ebp
- pushl %ebp
- shrl $3,%ebp
-
- addl %edx,%edx
- incl %ebp
- decl %ebp
- jz LLend
-
- movl (%edi),%eax /* fetch destination cache line */
-
- ALIGN (2)
-LLoop: movl 28(%edi),%eax /* fetch destination cache line */
- movl %edx,%ebx
-
- movl (%esi),%eax
- movl 4(%esi),%edx
- adcl %eax,%eax
- movl %ebx,(%edi)
- adcl %edx,%edx
- movl %eax,4(%edi)
-
- movl 8(%esi),%ebx
- movl 12(%esi),%eax
- adcl %ebx,%ebx
- movl %edx,8(%edi)
- adcl %eax,%eax
- movl %ebx,12(%edi)
-
- movl 16(%esi),%edx
- movl 20(%esi),%ebx
- adcl %edx,%edx
- movl %eax,16(%edi)
- adcl %ebx,%ebx
- movl %edx,20(%edi)
-
- movl 24(%esi),%eax
- movl 28(%esi),%edx
- adcl %eax,%eax
- movl %ebx,24(%edi)
- adcl %edx,%edx
- movl %eax,28(%edi)
-
- leal 32(%esi),%esi /* use leal not to clobber carry */
- leal 32(%edi),%edi
- decl %ebp
- jnz LLoop
-
-LLend: popl %ebp
- sbbl %eax,%eax /* save carry in %eax */
- andl $7,%ebp
- jz LLend2
- addl %eax,%eax /* restore carry from eax */
-LLoop2: movl %edx,%ebx
- movl (%esi),%edx
- adcl %edx,%edx
- movl %ebx,(%edi)
-
- leal 4(%esi),%esi /* use leal not to clobber carry */
- leal 4(%edi),%edi
- decl %ebp
- jnz LLoop2
-
- jmp LL1
-LLend2: addl %eax,%eax /* restore carry from eax */
-LL1: movl %edx,(%edi) /* store last limb */
-
- sbbl %eax,%eax
- negl %eax
-
- popl %ebp
- popl %ebx
- popl %esi
- popl %edi
- ret
-
-
diff --git a/mpi/i586/mpih-mul1.S b/mpi/i586/mpih-mul1.S
deleted file mode 100644
index 3601d968..00000000
--- a/mpi/i586/mpih-mul1.S
+++ /dev/null
@@ -1,89 +0,0 @@
-/* i80586 mul_1 -- Multiply a limb vector with a limb and store
- * the result in a second limb vector.
- *
- * Copyright (C) 1992, 1994, 1996, 1998,
- * 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_mul_1( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_size_t s1_size, (sp + 12)
- * mpi_limb_t s2_limb) (sp + 16)
- */
-
-#define res_ptr edi
-#define s1_ptr esi
-#define size ecx
-#define s2_limb ebp
-
- TEXT
- ALIGN (3)
- GLOBL C_SYMBOL_NAME(_gcry_mpih_mul_1)
-C_SYMBOL_NAME(_gcry_mpih_mul_1:)
-
- INSN1(push,l ,R(edi))
- INSN1(push,l ,R(esi))
- INSN1(push,l ,R(ebx))
- INSN1(push,l ,R(ebp))
-
- INSN2(mov,l ,R(res_ptr),MEM_DISP(esp,20))
- INSN2(mov,l ,R(s1_ptr),MEM_DISP(esp,24))
- INSN2(mov,l ,R(size),MEM_DISP(esp,28))
- INSN2(mov,l ,R(s2_limb),MEM_DISP(esp,32))
-
- INSN2(lea,l ,R(res_ptr),MEM_INDEX(res_ptr,size,4))
- INSN2(lea,l ,R(s1_ptr),MEM_INDEX(s1_ptr,size,4))
- INSN1(neg,l ,R(size))
- INSN2(xor,l ,R(ebx),R(ebx))
- ALIGN (3)
-
-Loop: INSN2(adc,l ,R(ebx),$0)
- INSN2(mov,l ,R(eax),MEM_INDEX(s1_ptr,size,4))
-
- INSN1(mul,l ,R(s2_limb))
-
- INSN2(add,l ,R(ebx),R(eax))
-
- INSN2(mov,l ,MEM_INDEX(res_ptr,size,4),R(ebx))
- INSN1(inc,l ,R(size))
-
- INSN2(mov,l ,R(ebx),R(edx))
- INSN1(jnz, ,Loop)
-
- INSN2(adc,l ,R(ebx),$0)
- INSN2(mov,l ,R(eax),R(ebx))
- INSN1(pop,l ,R(ebp))
- INSN1(pop,l ,R(ebx))
- INSN1(pop,l ,R(esi))
- INSN1(pop,l ,R(edi))
- ret
-
diff --git a/mpi/i586/mpih-mul2.S b/mpi/i586/mpih-mul2.S
deleted file mode 100644
index f32d363a..00000000
--- a/mpi/i586/mpih-mul2.S
+++ /dev/null
@@ -1,93 +0,0 @@
-/* i80586 addmul_1 -- Multiply a limb vector with a limb and add
- * the result to a second limb vector.
- *
- * Copyright (C) 1992, 1994, 1998,
- * 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_addmul_1( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_size_t s1_size, (sp + 12)
- * mpi_limb_t s2_limb) (sp + 16)
- */
-
-#define res_ptr edi
-#define s1_ptr esi
-#define size ecx
-#define s2_limb ebp
-
- TEXT
- ALIGN (3)
- GLOBL C_SYMBOL_NAME(_gcry_mpih_addmul_1)
-C_SYMBOL_NAME(_gcry_mpih_addmul_1:)
-
- INSN1(push,l ,R(edi))
- INSN1(push,l ,R(esi))
- INSN1(push,l ,R(ebx))
- INSN1(push,l ,R(ebp))
-
- INSN2(mov,l ,R(res_ptr),MEM_DISP(esp,20))
- INSN2(mov,l ,R(s1_ptr),MEM_DISP(esp,24))
- INSN2(mov,l ,R(size),MEM_DISP(esp,28))
- INSN2(mov,l ,R(s2_limb),MEM_DISP(esp,32))
-
- INSN2(lea,l ,R(res_ptr),MEM_INDEX(res_ptr,size,4))
- INSN2(lea,l ,R(s1_ptr),MEM_INDEX(s1_ptr,size,4))
- INSN1(neg,l ,R(size))
- INSN2(xor,l ,R(ebx),R(ebx))
- ALIGN (3)
-
-Loop: INSN2(adc,l ,R(ebx),$0)
- INSN2(mov,l ,R(eax),MEM_INDEX(s1_ptr,size,4))
-
- INSN1(mul,l ,R(s2_limb))
-
- INSN2(add,l ,R(eax),R(ebx))
- INSN2(mov,l ,R(ebx),MEM_INDEX(res_ptr,size,4))
-
- INSN2(adc,l ,R(edx),$0)
- INSN2(add,l ,R(ebx),R(eax))
-
- INSN2(mov,l ,MEM_INDEX(res_ptr,size,4),R(ebx))
- INSN1(inc,l ,R(size))
-
- INSN2(mov,l ,R(ebx),R(edx))
- INSN1(jnz, ,Loop)
-
- INSN2(adc,l ,R(ebx),$0)
- INSN2(mov,l ,R(eax),R(ebx))
- INSN1(pop,l ,R(ebp))
- INSN1(pop,l ,R(ebx))
- INSN1(pop,l ,R(esi))
- INSN1(pop,l ,R(edi))
- ret
-
diff --git a/mpi/i586/mpih-mul3.S b/mpi/i586/mpih-mul3.S
deleted file mode 100644
index fa27d4e1..00000000
--- a/mpi/i586/mpih-mul3.S
+++ /dev/null
@@ -1,93 +0,0 @@
-/* i80586 submul_1 -- Multiply a limb vector with a limb and add
- * the result to a second limb vector.
- *
- * Copyright (C) 1992, 1994, 1998,
- * 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_submul_1( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_size_t s1_size, (sp + 12)
- * mpi_limb_t s2_limb) (sp + 16)
- */
-
-#define res_ptr edi
-#define s1_ptr esi
-#define size ecx
-#define s2_limb ebp
-
- TEXT
- ALIGN (3)
- GLOBL C_SYMBOL_NAME(_gcry_mpih_submul_1)
-C_SYMBOL_NAME(_gcry_mpih_submul_1:)
-
- INSN1(push,l ,R(edi))
- INSN1(push,l ,R(esi))
- INSN1(push,l ,R(ebx))
- INSN1(push,l ,R(ebp))
-
- INSN2(mov,l ,R(res_ptr),MEM_DISP(esp,20))
- INSN2(mov,l ,R(s1_ptr),MEM_DISP(esp,24))
- INSN2(mov,l ,R(size),MEM_DISP(esp,28))
- INSN2(mov,l ,R(s2_limb),MEM_DISP(esp,32))
-
- INSN2(lea,l ,R(res_ptr),MEM_INDEX(res_ptr,size,4))
- INSN2(lea,l ,R(s1_ptr),MEM_INDEX(s1_ptr,size,4))
- INSN1(neg,l ,R(size))
- INSN2(xor,l ,R(ebx),R(ebx))
- ALIGN (3)
-
-Loop: INSN2(adc,l ,R(ebx),$0)
- INSN2(mov,l ,R(eax),MEM_INDEX(s1_ptr,size,4))
-
- INSN1(mul,l ,R(s2_limb))
-
- INSN2(add,l ,R(eax),R(ebx))
- INSN2(mov,l ,R(ebx),MEM_INDEX(res_ptr,size,4))
-
- INSN2(adc,l ,R(edx),$0)
- INSN2(sub,l ,R(ebx),R(eax))
-
- INSN2(mov,l ,MEM_INDEX(res_ptr,size,4),R(ebx))
- INSN1(inc,l ,R(size))
-
- INSN2(mov,l ,R(ebx),R(edx))
- INSN1(jnz, ,Loop)
-
- INSN2(adc,l ,R(ebx),$0)
- INSN2(mov,l ,R(eax),R(ebx))
- INSN1(pop,l ,R(ebp))
- INSN1(pop,l ,R(ebx))
- INSN1(pop,l ,R(esi))
- INSN1(pop,l ,R(edi))
- ret
-
diff --git a/mpi/i586/mpih-rshift.S b/mpi/i586/mpih-rshift.S
deleted file mode 100644
index c661e3d3..00000000
--- a/mpi/i586/mpih-rshift.S
+++ /dev/null
@@ -1,228 +0,0 @@
-/* i80586 rshift
- *
- * Copyright (C) 1992, 1994, 1998,
- * 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_rshift( mpi_ptr_t wp, (sp + 4)
- * mpi_ptr_t up, (sp + 8)
- * mpi_size_t usize, (sp + 12)
- * unsigned cnt) (sp + 16)
- */
-
-.text
- ALIGN (3)
- .globl C_SYMBOL_NAME(_gcry_mpih_rshift)
-C_SYMBOL_NAME(_gcry_mpih_rshift:)
- pushl %edi
- pushl %esi
- pushl %ebx
- pushl %ebp
-
- movl 20(%esp),%edi /* res_ptr */
- movl 24(%esp),%esi /* s_ptr */
- movl 28(%esp),%ebp /* size */
- movl 32(%esp),%ecx /* cnt */
-
-/* We can use faster code for shift-by-1 under certain conditions. */
- cmp $1,%ecx
- jne Rnormal
- leal 4(%edi),%eax
- cmpl %esi,%eax
- jnc Rspecial /* jump if res_ptr + 1 >= s_ptr */
- leal (%edi,%ebp,4),%eax
- cmpl %eax,%esi
- jnc Rspecial /* jump if s_ptr >= res_ptr + size */
-
-Rnormal:
- movl (%esi),%edx
- addl $4,%esi
- xorl %eax,%eax
- shrdl %cl,%edx,%eax /* compute carry limb */
- pushl %eax /* push carry limb onto stack */
-
- decl %ebp
- pushl %ebp
- shrl $3,%ebp
- jz Rend
-
- movl (%edi),%eax /* fetch destination cache line */
-
- ALIGN (2)
-Roop: movl 28(%edi),%eax /* fetch destination cache line */
- movl %edx,%ebx
-
- movl (%esi),%eax
- movl 4(%esi),%edx
- shrdl %cl,%eax,%ebx
- shrdl %cl,%edx,%eax
- movl %ebx,(%edi)
- movl %eax,4(%edi)
-
- movl 8(%esi),%ebx
- movl 12(%esi),%eax
- shrdl %cl,%ebx,%edx
- shrdl %cl,%eax,%ebx
- movl %edx,8(%edi)
- movl %ebx,12(%edi)
-
- movl 16(%esi),%edx
- movl 20(%esi),%ebx
- shrdl %cl,%edx,%eax
- shrdl %cl,%ebx,%edx
- movl %eax,16(%edi)
- movl %edx,20(%edi)
-
- movl 24(%esi),%eax
- movl 28(%esi),%edx
- shrdl %cl,%eax,%ebx
- shrdl %cl,%edx,%eax
- movl %ebx,24(%edi)
- movl %eax,28(%edi)
-
- addl $32,%esi
- addl $32,%edi
- decl %ebp
- jnz Roop
-
-Rend: popl %ebp
- andl $7,%ebp
- jz Rend2
-Roop2: movl (%esi),%eax
- shrdl %cl,%eax,%edx /* compute result limb */
- movl %edx,(%edi)
- movl %eax,%edx
- addl $4,%esi
- addl $4,%edi
- decl %ebp
- jnz Roop2
-
-Rend2: shrl %cl,%edx /* compute most significant limb */
- movl %edx,(%edi) /* store it */
-
- popl %eax /* pop carry limb */
-
- popl %ebp
- popl %ebx
- popl %esi
- popl %edi
- ret
-
-/* We loop from least significant end of the arrays, which is only
- permissable if the source and destination don't overlap, since the
- function is documented to work for overlapping source and destination.
-*/
-
-Rspecial:
- leal -4(%edi,%ebp,4),%edi
- leal -4(%esi,%ebp,4),%esi
-
- movl (%esi),%edx
- subl $4,%esi
-
- decl %ebp
- pushl %ebp
- shrl $3,%ebp
-
- shrl $1,%edx
- incl %ebp
- decl %ebp
- jz RLend
-
- movl (%edi),%eax /* fetch destination cache line */
-
- ALIGN (2)
-RLoop: movl -28(%edi),%eax /* fetch destination cache line */
- movl %edx,%ebx
-
- movl (%esi),%eax
- movl -4(%esi),%edx
- rcrl $1,%eax
- movl %ebx,(%edi)
- rcrl $1,%edx
- movl %eax,-4(%edi)
-
- movl -8(%esi),%ebx
- movl -12(%esi),%eax
- rcrl $1,%ebx
- movl %edx,-8(%edi)
- rcrl $1,%eax
- movl %ebx,-12(%edi)
-
- movl -16(%esi),%edx
- movl -20(%esi),%ebx
- rcrl $1,%edx
- movl %eax,-16(%edi)
- rcrl $1,%ebx
- movl %edx,-20(%edi)
-
- movl -24(%esi),%eax
- movl -28(%esi),%edx
- rcrl $1,%eax
- movl %ebx,-24(%edi)
- rcrl $1,%edx
- movl %eax,-28(%edi)
-
- leal -32(%esi),%esi /* use leal not to clobber carry */
- leal -32(%edi),%edi
- decl %ebp
- jnz RLoop
-
-RLend: popl %ebp
- sbbl %eax,%eax /* save carry in %eax */
- andl $7,%ebp
- jz RLend2
- addl %eax,%eax /* restore carry from eax */
-RLoop2: movl %edx,%ebx
- movl (%esi),%edx
- rcrl $1,%edx
- movl %ebx,(%edi)
-
- leal -4(%esi),%esi /* use leal not to clobber carry */
- leal -4(%edi),%edi
- decl %ebp
- jnz RLoop2
-
- jmp RL1
-RLend2: addl %eax,%eax /* restore carry from eax */
-RL1: movl %edx,(%edi) /* store last limb */
-
- movl $0,%eax
- rcrl $1,%eax
-
- popl %ebp
- popl %ebx
- popl %esi
- popl %edi
- ret
-
diff --git a/mpi/i586/mpih-sub1.S b/mpi/i586/mpih-sub1.S
deleted file mode 100644
index ef2d5807..00000000
--- a/mpi/i586/mpih-sub1.S
+++ /dev/null
@@ -1,142 +0,0 @@
-/* i80586 sub_n -- Sub two limb vectors of the same length > 0 and store
- * sum in a third limb vector.
- *
- * Copyright (C) 1992, 1994, 1995, 1998,
- * 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_sub_n( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_ptr_t s2_ptr, (sp + 12)
- * mpi_size_t size) (sp + 16)
- */
-
-
-.text
- ALIGN (3)
- .globl C_SYMBOL_NAME(_gcry_mpih_sub_n)
-C_SYMBOL_NAME(_gcry_mpih_sub_n:)
-
- pushl %edi
- pushl %esi
- pushl %ebx
- pushl %ebp
-
- movl 20(%esp),%edi /* res_ptr */
- movl 24(%esp),%esi /* s1_ptr */
- movl 28(%esp),%ebp /* s2_ptr */
- movl 32(%esp),%ecx /* size */
-
- movl (%ebp),%ebx
-
- decl %ecx
- movl %ecx,%edx
- shrl $3,%ecx
- andl $7,%edx
- testl %ecx,%ecx /* zero carry flag */
- jz Lend
- pushl %edx
-
- ALIGN (3)
-Loop: movl 28(%edi),%eax /* fetch destination cache line */
- leal 32(%edi),%edi
-
-L1: movl (%esi),%eax
- movl 4(%esi),%edx
- sbbl %ebx,%eax
- movl 4(%ebp),%ebx
- sbbl %ebx,%edx
- movl 8(%ebp),%ebx
- movl %eax,-32(%edi)
- movl %edx,-28(%edi)
-
-L2: movl 8(%esi),%eax
- movl 12(%esi),%edx
- sbbl %ebx,%eax
- movl 12(%ebp),%ebx
- sbbl %ebx,%edx
- movl 16(%ebp),%ebx
- movl %eax,-24(%edi)
- movl %edx,-20(%edi)
-
-L3: movl 16(%esi),%eax
- movl 20(%esi),%edx
- sbbl %ebx,%eax
- movl 20(%ebp),%ebx
- sbbl %ebx,%edx
- movl 24(%ebp),%ebx
- movl %eax,-16(%edi)
- movl %edx,-12(%edi)
-
-L4: movl 24(%esi),%eax
- movl 28(%esi),%edx
- sbbl %ebx,%eax
- movl 28(%ebp),%ebx
- sbbl %ebx,%edx
- movl 32(%ebp),%ebx
- movl %eax,-8(%edi)
- movl %edx,-4(%edi)
-
- leal 32(%esi),%esi
- leal 32(%ebp),%ebp
- decl %ecx
- jnz Loop
-
- popl %edx
-Lend:
- decl %edx /* test %edx w/o clobbering carry */
- js Lend2
- incl %edx
-Loop2:
- leal 4(%edi),%edi
- movl (%esi),%eax
- sbbl %ebx,%eax
- movl 4(%ebp),%ebx
- movl %eax,-4(%edi)
- leal 4(%esi),%esi
- leal 4(%ebp),%ebp
- decl %edx
- jnz Loop2
-Lend2:
- movl (%esi),%eax
- sbbl %ebx,%eax
- movl %eax,(%edi)
-
- sbbl %eax,%eax
- negl %eax
-
- popl %ebp
- popl %ebx
- popl %esi
- popl %edi
- ret
-
diff --git a/mpi/pentium4/README b/mpi/pentium4/README
deleted file mode 100644
index 215fc7f8..00000000
--- a/mpi/pentium4/README
+++ /dev/null
@@ -1,115 +0,0 @@
-Copyright 2001 Free Software Foundation, Inc.
-
-This file is part of the GNU MP Library.
-
-The GNU MP Library is free software; you can redistribute it and/or modify
-it under the terms of the GNU Lesser General Public License as published by
-the Free Software Foundation; either version 2.1 of the License, or (at your
-option) any later version.
-
-The GNU MP Library is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
-License for more details.
-
-You should have received a copy of the GNU Lesser General Public License
-along with the GNU MP Library; see the file COPYING.LIB. If not, write to
-the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-02110-1301, USA.
-
-
-
-
- INTEL PENTIUM-4 MPN SUBROUTINES
-
-
-This directory contains mpn functions optimized for Intel Pentium-4.
-
-The mmx subdirectory has routines using MMX instructions, the sse2
-subdirectory has routines using SSE2 instructions. All P4s have these, the
-separate directories are just so configure can omit that code if the
-assembler doesn't support it.
-
-
-STATUS
-
- cycles/limb
-
- mpn_add_n/sub_n 4 normal, 6 in-place
-
- mpn_mul_1 4 normal, 6 in-place
- mpn_addmul_1 6
- mpn_submul_1 7
-
- mpn_mul_basecase 6 cycles/crossproduct (approx)
-
- mpn_sqr_basecase 3.5 cycles/crossproduct (approx)
- or 7.0 cycles/triangleproduct (approx)
-
- mpn_l/rshift 1.75
-
-
-
-The shifts ought to be able to go at 1.5 c/l, but not much effort has been
-applied to them yet.
-
-In-place operations, and all addmul, submul, mul_basecase and sqr_basecase
-calls, suffer from pipeline anomalies associated with write combining and
-movd reads and writes to the same or nearby locations. The movq
-instructions do not trigger the same hardware problems. Unfortunately,
-using movq and splitting/combining seems to require too many extra
-instructions to help. Perhaps future chip steppings will be better.
-
-
-
-NOTES
-
-The Pentium-4 pipeline "Netburst", provides for quite a number of surprises.
-Many traditional x86 instructions run very slowly, requiring use of
-alterative instructions for acceptable performance.
-
-adcl and sbbl are quite slow at 8 cycles for reg->reg. paddq of 32-bits
-within a 64-bit mmx register seems better, though the combination
-paddq/psrlq when propagating a carry is still a 4 cycle latency.
-
-incl and decl should be avoided, instead use add $1 and sub $1. Apparently
-the carry flag is not separately renamed, so incl and decl depend on all
-previous flags-setting instructions.
-
-shll and shrl have a 4 cycle latency, or 8 times the latency of the fastest
-integer instructions (addl, subl, orl, andl, and some more). shldl and
-shrdl seem to have 13 and 15 cycles latency, respectively. Bizarre.
-
-movq mmx -> mmx does have 6 cycle latency, as noted in the documentation.
-pxor/por or similar combination at 2 cycles latency can be used instead.
-The movq however executes in the float unit, thereby saving MMX execution
-resources. With the right juggling, data moves shouldn't be on a dependent
-chain.
-
-L1 is write-through, but the write-combining sounds like it does enough to
-not require explicit destination prefetching.
-
-xmm registers so far haven't found a use, but not much effort has been
-expended. A configure test for whether the operating system knows
-fxsave/fxrestor will be needed if they're used.
-
-
-
-REFERENCES
-
-Intel Pentium-4 processor manuals,
-
- http://developer.intel.com/design/pentium4/manuals
-
-"Intel Pentium 4 Processor Optimization Reference Manual", Intel, 2001,
-order number 248966. Available on-line:
-
- http://developer.intel.com/design/pentium4/manuals/248966.htm
-
-
-
-----------------
-Local variables:
-mode: text
-fill-column: 76
-End:
diff --git a/mpi/pentium4/distfiles b/mpi/pentium4/distfiles
deleted file mode 100644
index b419f85a..00000000
--- a/mpi/pentium4/distfiles
+++ /dev/null
@@ -1,3 +0,0 @@
-README
-
-
diff --git a/mpi/pentium4/mmx/distfiles b/mpi/pentium4/mmx/distfiles
deleted file mode 100644
index 8f0ea426..00000000
--- a/mpi/pentium4/mmx/distfiles
+++ /dev/null
@@ -1,2 +0,0 @@
-mpih-lshift.S
-mpih-rshift.S
diff --git a/mpi/pentium4/mmx/mpih-lshift.S b/mpi/pentium4/mmx/mpih-lshift.S
deleted file mode 100644
index e2dd184b..00000000
--- a/mpi/pentium4/mmx/mpih-lshift.S
+++ /dev/null
@@ -1,457 +0,0 @@
-/* Intel Pentium-4 mpn_lshift -- left shift.
- *
- * Copyright 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_lshift( mpi_ptr_t wp, (sp + 4)
- * mpi_ptr_t up, (sp + 8)
- * mpi_size_t usize, (sp + 12)
- * unsigned cnt) (sp + 16)
- *
- * P4 Willamette, Northwood: 1.75 cycles/limb
- * P4 Prescott: 2.0 cycles/limb
- */
-
-.text
- ALIGN (3)
- .globl C_SYMBOL_NAME(_gcry_mpih_lshift)
-C_SYMBOL_NAME(_gcry_mpih_lshift:)
-
-
- pushl %ebx
- pushl %edi
-
-
- movl 20(%esp), %eax
- movl 12(%esp), %edx
-
- movl 16(%esp), %ebx
- movl 24(%esp), %ecx
-
- cmp $5, %eax
- jae .Lunroll
-
- movl -4(%ebx,%eax,4), %edi
- decl %eax
-
- jnz .Lsimple
-
- shldl %cl, %edi, %eax
-
- shll %cl, %edi
-
- movl %edi, (%edx)
- popl %edi
-
- popl %ebx
-
- ret
-
-
-
-
-
-.Lsimple:
-
-
-
-
-
-
-
-
-
- movd (%ebx,%eax,4), %mm5
-
- movd %ecx, %mm6
- negl %ecx
-
- psllq %mm6, %mm5
- addl $32, %ecx
-
- movd %ecx, %mm7
- psrlq $32, %mm5
-
-
-.Lsimple_top:
-
-
-
-
-
-
-
-
-
-
-
-
- movq -4(%ebx,%eax,4), %mm0
- decl %eax
-
- psrlq %mm7, %mm0
-
-
-
- movd %mm0, 4(%edx,%eax,4)
- jnz .Lsimple_top
-
-
- movd (%ebx), %mm0
-
- movd %mm5, %eax
- psllq %mm6, %mm0
-
- popl %edi
- popl %ebx
-
- movd %mm0, (%edx)
-
- emms
-
- ret
-
-
-
-
-
- .align 8, 0x90
-.Lunroll:
-
-
-
-
-
-
-
-
-
- movd -4(%ebx,%eax,4), %mm5
- leal (%ebx,%eax,4), %edi
-
- movd %ecx, %mm6
- andl $4, %edi
-
- psllq %mm6, %mm5
- jz .Lstart_src_aligned
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movq -8(%ebx,%eax,4), %mm0
-
- psllq %mm6, %mm0
- decl %eax
-
- psrlq $32, %mm0
-
-
-
- movd %mm0, (%edx,%eax,4)
-.Lstart_src_aligned:
-
- movq -8(%ebx,%eax,4), %mm1
- leal (%edx,%eax,4), %edi
-
- andl $4, %edi
- psrlq $32, %mm5
-
- movq -16(%ebx,%eax,4), %mm3
- jz .Lstart_dst_aligned
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movq %mm1, %mm0
- addl $32, %ecx
-
- psllq %mm6, %mm0
-
- movd %ecx, %mm6
- psrlq $32, %mm0
-
-
-
- movd %mm0, -4(%edx,%eax,4)
- subl $4, %edx
-.Lstart_dst_aligned:
-
-
- psllq %mm6, %mm1
- negl %ecx
-
- addl $64, %ecx
- movq %mm3, %mm2
-
- movd %ecx, %mm7
- subl $8, %eax
-
- psrlq %mm7, %mm3
-
- por %mm1, %mm3
- jc .Lfinish
-
-
-
-
- .align 8, 0x90
-.Lunroll_loop:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movq 8(%ebx,%eax,4), %mm0
- psllq %mm6, %mm2
-
- movq %mm0, %mm1
- psrlq %mm7, %mm0
-
- movq %mm3, 24(%edx,%eax,4)
- por %mm2, %mm0
-
- movq (%ebx,%eax,4), %mm3
- psllq %mm6, %mm1
-
- movq %mm0, 16(%edx,%eax,4)
- movq %mm3, %mm2
-
- psrlq %mm7, %mm3
- subl $4, %eax
-
- por %mm1, %mm3
- jnc .Lunroll_loop
-
-
-
-.Lfinish:
-
-
- testb $2, %al
-
- jz .Lfinish_no_two
-
- movq 8(%ebx,%eax,4), %mm0
- psllq %mm6, %mm2
-
- movq %mm0, %mm1
- psrlq %mm7, %mm0
-
- movq %mm3, 24(%edx,%eax,4)
- por %mm2, %mm0
-
- movq %mm1, %mm2
- movq %mm0, %mm3
-
- subl $2, %eax
-.Lfinish_no_two:
-
-
-
-
-
-
-
- testb $1, %al
- movd %mm5, %eax
-
- popl %edi
- jz .Lfinish_zero
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movd (%ebx), %mm0
- psllq %mm6, %mm2
-
- movq %mm3, 12(%edx)
- psllq $32, %mm0
-
- movq %mm0, %mm1
- psrlq %mm7, %mm0
-
- por %mm2, %mm0
- psllq %mm6, %mm1
-
- movq %mm0, 4(%edx)
- psrlq $32, %mm1
-
- andl $32, %ecx
- popl %ebx
-
- jz .Lfinish_one_unaligned
-
- movd %mm1, (%edx)
-.Lfinish_one_unaligned:
-
- emms
-
- ret
-
-
-
-
-.Lfinish_zero:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movq %mm3, 8(%edx)
- andl $32, %ecx
-
- psllq %mm6, %mm2
- jz .Lfinish_zero_unaligned
-
- movq %mm2, (%edx)
-.Lfinish_zero_unaligned:
-
- psrlq $32, %mm2
- popl %ebx
-
- movd %mm5, %eax
-
- movd %mm2, 4(%edx)
-
- emms
-
- ret
diff --git a/mpi/pentium4/mmx/mpih-rshift.S b/mpi/pentium4/mmx/mpih-rshift.S
deleted file mode 100644
index e3374e3b..00000000
--- a/mpi/pentium4/mmx/mpih-rshift.S
+++ /dev/null
@@ -1,453 +0,0 @@
-/* Intel Pentium-4 mpn_rshift -- right shift.
- *
- * Copyright 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_rshift( mpi_ptr_t wp, (sp + 4)
- * mpi_ptr_t up, (sp + 8)
- * mpi_size_t usize, (sp + 12)
- * unsigned cnt) (sp + 16)
- *
- * P4 Willamette, Northwood: 1.75 cycles/limb
- * P4 Prescott: 2.0 cycles/limb
- */
-
-.text
- ALIGN (3)
- .globl C_SYMBOL_NAME(_gcry_mpih_rshift)
-C_SYMBOL_NAME(_gcry_mpih_rshift:)
- pushl %ebx
- pushl %edi
-
-
- movl 20(%esp), %eax
- movl 12(%esp), %edx
-
- movl 16(%esp), %ebx
- movl 24(%esp), %ecx
-
- cmp $5, %eax
- jae .Lunroll
-
- decl %eax
- movl (%ebx), %edi
-
- jnz .Lsimple
-
- shrdl %cl, %edi, %eax
-
- shrl %cl, %edi
-
- movl %edi, (%edx)
- popl %edi
-
- popl %ebx
-
- ret
-
-
-
-
-
- .align 8, 0x90
-.Lsimple:
-
-
-
-
-
-
-
-
-
- movd (%ebx), %mm5
- leal (%ebx,%eax,4), %ebx
-
- movd %ecx, %mm6
- leal -4(%edx,%eax,4), %edx
-
- psllq $32, %mm5
- negl %eax
-
-
-
-
-
-
-
-.Lsimple_top:
-
-
-
-
-
-
-
-
-
- movq (%ebx,%eax,4), %mm0
- incl %eax
-
- psrlq %mm6, %mm0
-
- movd %mm0, (%edx,%eax,4)
- jnz .Lsimple_top
-
-
- movd (%ebx), %mm0
- psrlq %mm6, %mm5
-
- psrlq %mm6, %mm0
- popl %edi
-
- movd %mm5, %eax
- popl %ebx
-
- movd %mm0, 4(%edx)
-
- emms
-
- ret
-
-
-
-
-
- .align 8, 0x90
-.Lunroll:
-
-
-
-
-
-
-
-
-
- movd (%ebx), %mm5
- movl $4, %edi
-
- movd %ecx, %mm6
- testl %edi, %ebx
-
- psllq $32, %mm5
- jz .Lstart_src_aligned
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movq (%ebx), %mm0
-
- psrlq %mm6, %mm0
- addl $4, %ebx
-
- decl %eax
-
- movd %mm0, (%edx)
- addl $4, %edx
-.Lstart_src_aligned:
-
-
- movq (%ebx), %mm1
- testl %edi, %edx
-
- psrlq %mm6, %mm5
- jz .Lstart_dst_aligned
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movq %mm1, %mm0
- addl $32, %ecx
-
- psrlq %mm6, %mm0
-
- movd %ecx, %mm6
-
- movd %mm0, (%edx)
- addl $4, %edx
-.Lstart_dst_aligned:
-
-
- movq 8(%ebx), %mm3
- negl %ecx
-
- movq %mm3, %mm2
- addl $64, %ecx
-
- movd %ecx, %mm7
- psrlq %mm6, %mm1
-
- leal -12(%ebx,%eax,4), %ebx
- leal -20(%edx,%eax,4), %edx
-
- psllq %mm7, %mm3
- subl $7, %eax
-
- por %mm1, %mm3
- negl %eax
-
- jns .Lfinish
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- .align 8, 0x90
-.Lunroll_loop:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movq (%ebx,%eax,4), %mm0
- psrlq %mm6, %mm2
-
- movq %mm0, %mm1
- psllq %mm7, %mm0
-
- movq %mm3, -8(%edx,%eax,4)
- por %mm2, %mm0
-
- movq 8(%ebx,%eax,4), %mm3
- psrlq %mm6, %mm1
-
- movq %mm0, (%edx,%eax,4)
- movq %mm3, %mm2
-
- psllq %mm7, %mm3
- addl $4, %eax
-
- por %mm1, %mm3
- js .Lunroll_loop
-
-
-.Lfinish:
-
-
- testb $2, %al
-
- jnz .Lfinish_no_two
-
- movq (%ebx,%eax,4), %mm0
- psrlq %mm6, %mm2
-
- movq %mm0, %mm1
- psllq %mm7, %mm0
-
- movq %mm3, -8(%edx,%eax,4)
- por %mm2, %mm0
-
- movq %mm1, %mm2
- movq %mm0, %mm3
-
- addl $2, %eax
-.Lfinish_no_two:
-
-
-
-
-
-
-
- testb $1, %al
- popl %edi
-
- movd %mm5, %eax
- jnz .Lfinish_zero
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movd 8(%ebx), %mm0
- psrlq %mm6, %mm2
-
- movq %mm0, %mm1
- psllq %mm7, %mm0
-
- movq %mm3, (%edx)
- por %mm2, %mm0
-
- psrlq %mm6, %mm1
- andl $32, %ecx
-
- popl %ebx
- jz .Lfinish_one_unaligned
-
-
- movd %mm1, 16(%edx)
-.Lfinish_one_unaligned:
-
- movq %mm0, 8(%edx)
-
- emms
-
- ret
-
-
-
-
-.Lfinish_zero:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- movq %mm3, 4(%edx)
- psrlq %mm6, %mm2
-
- movd %mm2, 12(%edx)
- andl $32, %ecx
-
- popl %ebx
- jz .Lfinish_zero_unaligned
-
- movq %mm2, 12(%edx)
-.Lfinish_zero_unaligned:
-
- emms
-
- ret
diff --git a/mpi/pentium4/sse2/distfiles b/mpi/pentium4/sse2/distfiles
deleted file mode 100644
index 7252cd7e..00000000
--- a/mpi/pentium4/sse2/distfiles
+++ /dev/null
@@ -1,5 +0,0 @@
-mpih-add1.S
-mpih-mul1.S
-mpih-mul2.S
-mpih-mul3.S
-mpih-sub1.S
diff --git a/mpi/pentium4/sse2/mpih-add1.S b/mpi/pentium4/sse2/mpih-add1.S
deleted file mode 100644
index 55ed6630..00000000
--- a/mpi/pentium4/sse2/mpih-add1.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/* Intel Pentium-4 mpn_add_n -- mpn addition.
- *
- * Copyright 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
- /*******************
- * mpi_limb_t
- * _gcry_mpih_add_n( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_ptr_t s2_ptr, (sp + 12)
- * mpi_size_t size) (sp + 16)
- *
- * P4 Willamette, Northwood: 4.0 cycles/limb if dst!=src1 and dst!=src2
- * 6.0 cycles/limb if dst==src1 or dst==src2
- * P4 Prescott: >= 5 cycles/limb
- *
- * The 4 c/l achieved here isn't particularly good, but is better than 9 c/l
- * for a basic adc loop.
- */
-
- TEXT
- ALIGN (3)
- GLOBL C_SYMBOL_NAME(_gcry_mpih_add_n)
-C_SYMBOL_NAME(_gcry_mpih_add_n:)
-
- pxor %mm0, %mm0
-
- movl 8(%esp), %eax /* s1_ptr */
- movl %ebx, 8(%esp) /* re-use parameter space */
- movl 12(%esp), %ebx /* res_ptr */
- movl 4(%esp), %edx /* s2_ptr */
- movl 16(%esp), %ecx /* size */
-
- leal (%eax,%ecx,4), %eax /* src1 end */
- leal (%ebx,%ecx,4), %ebx /* src2 end */
- leal (%edx,%ecx,4), %edx /* dst end */
- negl %ecx /* -size */
-
-Ltop:
-/*
- C eax src1 end
- C ebx src2 end
- C ecx counter, limbs, negative
- C edx dst end
- C mm0 carry bit
-*/
-
- movd (%eax,%ecx,4), %mm1
- movd (%ebx,%ecx,4), %mm2
- paddq %mm2, %mm1
-
- paddq %mm1, %mm0
- movd %mm0, (%edx,%ecx,4)
-
- psrlq $32, %mm0
-
- addl $1, %ecx
- jnz Ltop
-
-
- movd %mm0, %eax
- movl 8(%esp), %ebx /* restore saved EBX */
- emms
- ret
diff --git a/mpi/pentium4/sse2/mpih-mul1.S b/mpi/pentium4/sse2/mpih-mul1.S
deleted file mode 100644
index a0c98fb4..00000000
--- a/mpi/pentium4/sse2/mpih-mul1.S
+++ /dev/null
@@ -1,96 +0,0 @@
-/* Intel Pentium-4 mpn_mul_1 -- Multiply a limb vector with a limb and store
- * the result in a second limb vector.
- *
- * Copyright 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_mul_1( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_size_t s1_size, (sp + 12)
- * mpi_limb_t s2_limb) (sp + 16)
- *
- * src != dst src == dst
- * P6 model 9 (Banias) ?.?
- * P6 model 13 (Dothan) 4.75 4.75
- * P4 model 0 (Willamette) 4.0 6.0
- * P4 model 1 (?) 4.0 6.0
- * P4 model 2 (Northwood) 4.0 6.0
- * P4 model 3 (Prescott) ?.? ?.?
- * P4 model 4 (Nocona) ?.? ?.?
- * Unfortunately when src==dst the write-combining described in
- * pentium4/README takes us up to 6 c/l.
- *
- */
-
- TEXT
- ALIGN (3)
- GLOBL C_SYMBOL_NAME(_gcry_mpih_mul_1)
-C_SYMBOL_NAME(_gcry_mpih_mul_1:);
-
- pxor %mm0, %mm0
-
-.Lstart_1c:
- movl 8(%esp), %eax
- movd 16(%esp), %mm7
- movl 4(%esp), %edx
- movl 12(%esp), %ecx
-
-.Ltop:
-
-/*
- C eax src, incrementing
- C ebx
- C ecx counter, size iterations
- C edx dst, incrementing
- C
- C mm0 carry limb
- C mm7 multiplier
-*/
-
- movd (%eax), %mm1
- addl $4, %eax
- pmuludq %mm7, %mm1
-
- paddq %mm1, %mm0
- movd %mm0, (%edx)
- addl $4, %edx
-
- psrlq $32, %mm0
-
- subl $1, %ecx
- jnz .Ltop
-
-
- movd %mm0, %eax
- emms
- ret
-
diff --git a/mpi/pentium4/sse2/mpih-mul2.S b/mpi/pentium4/sse2/mpih-mul2.S
deleted file mode 100644
index f975adfc..00000000
--- a/mpi/pentium4/sse2/mpih-mul2.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/* Intel Pentium-4 mpn_addmul_1 -- Multiply a limb vector with a limb and add
- * the result to a second limb vector.
- *
- * Copyright 2001, 2002, 2004, 2005 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_addmul_1( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_size_t s1_size, (sp + 12)
- * mpi_limb_t s2_limb) (sp + 16)
- *
- * P3 model 9 (Banias) ?.?
- * P3 model 13 (Dothan) 5.8
- * P4 model 0 (Willamette) 5.5
- * P4 model 1 (?) 5.5
- * P4 model 2 (Northwood) 5.5
- * P4 model 3 (Prescott) 6.0
- * P4 model 4 (Nocona)
- *
- * Only the carry limb propagation is on the dependent chain, but some other
- * Pentium4 pipeline magic brings down performance to 6 cycles/l from the
- * ideal 4 cycles/l.
- */
-
-
- TEXT
- ALIGN (4)
- GLOBL C_SYMBOL_NAME(_gcry_mpih_addmul_1)
-C_SYMBOL_NAME(_gcry_mpih_addmul_1:)
-
- pxor %mm4, %mm4
-.Lstart_1c:
- movl 8(%esp), %eax
- movl 12(%esp), %ecx
- movl 4(%esp), %edx
- movd 16(%esp), %mm7
-
-/*
- C eax src, incrementing ; 5B
- C ecx loop counter, decrementing
- C edx dst, incrementing
- C
- C mm4 carry, low 32-bits
- C mm7 multiplier
-*/
-
- movd (%eax), %mm2
- pmuludq %mm7, %mm2
-
- shrl $1, %ecx
- jnc .Leven
-
- leal 4(%eax), %eax
- movd (%edx), %mm1
- paddq %mm2, %mm1
- paddq %mm1, %mm4
- movd %mm4, (%edx)
- psrlq $32, %mm4
-
- testl %ecx, %ecx
- jz .Lrtn
- leal 4(%edx), %edx
-
- movd (%eax), %mm2
- pmuludq %mm7, %mm2
-.Leven:
- movd 4(%eax), %mm0
- movd (%edx), %mm1
- pmuludq %mm7, %mm0
-
- subl $1, %ecx
- jz .Lend
-.Lloop:
- paddq %mm2, %mm1
- movd 8(%eax), %mm2
- paddq %mm1, %mm4
- movd 4(%edx), %mm3
- pmuludq %mm7, %mm2
- movd %mm4, (%edx)
- psrlq $32, %mm4
-
- paddq %mm0, %mm3
- movd 12(%eax), %mm0
- paddq %mm3, %mm4
- movd 8(%edx), %mm1
- pmuludq %mm7, %mm0
- movd %mm4, 4(%edx)
- psrlq $32, %mm4
-
- leal 8(%eax), %eax
- leal 8(%edx), %edx
- subl $1, %ecx
- jnz .Lloop
-.Lend:
- paddq %mm2, %mm1
- paddq %mm1, %mm4
- movd 4(%edx), %mm3
- movd %mm4, (%edx)
- psrlq $32, %mm4
- paddq %mm0, %mm3
- paddq %mm3, %mm4
- movd %mm4, 4(%edx)
- psrlq $32, %mm4
-.Lrtn:
- movd %mm4, %eax
- emms
- ret
diff --git a/mpi/pentium4/sse2/mpih-mul3.S b/mpi/pentium4/sse2/mpih-mul3.S
deleted file mode 100644
index ebcd2a68..00000000
--- a/mpi/pentium4/sse2/mpih-mul3.S
+++ /dev/null
@@ -1,127 +0,0 @@
-/* Intel Pentium-4 mpn_submul_1 -- Multiply a limb vector with a limb and
- * subtract the result from a second limb vector.
- *
- * Copyright 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_submul_1( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_size_t s1_size, (sp + 12)
- * mpi_limb_t s2_limb) (sp + 16)
- *
- * P4: 7 cycles/limb, unstable timing, at least on early Pentium4 silicon
- * (stepping 10).
- *
- * This code is not particularly good at 7 c/l. The dependent chain is only
- * 4 c/l and there's only 4 MMX unit instructions, so it's not clear why that
- * speed isn't achieved.
- *
- * The arrangements made here to get a two instruction dependent chain are
- * slightly subtle. In the loop the carry (or borrow rather) is a negative
- * so that a paddq can be used to give a low limb ready to store, and a high
- * limb ready to become the new carry after a psrlq.
- *
- * If the carry was a simple twos complement negative then the psrlq shift
- * would need to bring in 0 bits or 1 bits according to whether the high was
- * zero or non-zero, since a non-zero value would represent a negative
- * needing sign extension. That wouldn't be particularly easy to arrange and
- * certainly would add an instruction to the dependent chain, so instead an
- * offset is applied so that the high limb will be 0xFFFFFFFF+c. With c in
- * the range -0xFFFFFFFF to 0, the value 0xFFFFFFFF+c is in the range 0 to
- * 0xFFFFFFFF and is therefore always positive and can always have 0 bits
- * shifted in, which is what psrlq does.
- *
- * The extra 0xFFFFFFFF must be subtracted before c is used, but that can be
- * done off the dependent chain. The total adjustment then is to add
- * 0xFFFFFFFF00000000 to offset the new carry, and subtract
- * 0x00000000FFFFFFFF to remove the offset from the current carry, for a net
- * add of 0xFFFFFFFE00000001. In the code this is applied to the destination
- * limb when fetched.
- *
- * It's also possible to view the 0xFFFFFFFF adjustment as a ones-complement
- * negative, which is how it's undone for the return value, but that doesn't
- * seem as clear.
-*/
-
- TEXT
- ALIGN (4)
- GLOBL C_SYMBOL_NAME(_gcry_mpih_submul_1)
-C_SYMBOL_NAME(_gcry_mpih_submul_1:)
-
- pxor %mm1, %mm1
-
-.Lstart_1c:
- movl 8(%esp), %eax
- pcmpeqd %mm0, %mm0
-
- movd 16(%esp), %mm7
- pcmpeqd %mm6, %mm6
-
- movl 4(%esp), %edx
- psrlq $32, %mm0
-
- movl 12(%esp), %ecx
- psllq $32, %mm6
-
- psubq %mm0, %mm6
-
- psubq %mm1, %mm0
-
-/*
- C eax src, incrementing
- C ebx
- C ecx loop counter, decrementing
- C edx dst, incrementing
- C
- C mm0 0xFFFFFFFF - borrow
- C mm6 0xFFFFFFFE00000001
- C mm7 multiplier
-*/
-
-.Lloop:
- movd (%eax), %mm1
- leal 4(%eax), %eax
- movd (%edx), %mm2
- paddq %mm6, %mm2
- pmuludq %mm7, %mm1
- psubq %mm1, %mm2
- paddq %mm2, %mm0
- subl $1, %ecx
- movd %mm0, (%edx)
- psrlq $32, %mm0
- leal 4(%edx), %edx
- jnz .Lloop
-
- movd %mm0, %eax
- notl %eax
- emms
- ret
diff --git a/mpi/pentium4/sse2/mpih-sub1.S b/mpi/pentium4/sse2/mpih-sub1.S
deleted file mode 100644
index 33900c74..00000000
--- a/mpi/pentium4/sse2/mpih-sub1.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/* Intel Pentium-4 mpn_sub_n -- mpn subtraction.
- *
- * Copyright 2001, 2002 Free Software Foundation, Inc.
- *
- * This file is part of Libgcrypt.
- *
- * Libgcrypt is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of
- * the License, or (at your option) any later version.
- *
- * Libgcrypt is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- * Actually it's the same code with only minor changes in the
- * way the data is stored; this is to support the abstraction
- * of an optional secure memory allocation which may be used
- * to avoid revealing of sensitive data due to paging etc.
- */
-
-
-#include "sysdep.h"
-#include "asm-syntax.h"
-
-
-/*******************
- * mpi_limb_t
- * _gcry_mpih_sub_n( mpi_ptr_t res_ptr, (sp + 4)
- * mpi_ptr_t s1_ptr, (sp + 8)
- * mpi_ptr_t s2_ptr, (sp + 12)
- * mpi_size_t size) (sp + 16)
- *
- * P4 Willamette, Northwood: 4.0 cycles/limb if dst!=src1 and dst!=src2
- * 6.0 cycles/limb if dst==src1 or dst==src2
- * P4 Prescott: >= 5 cycles/limb
- *
- * The main loop code is 2x unrolled so that the carry bit can alternate
- * between mm0 and mm1.
- */
-
-
-.text
- ALIGN (3)
- .globl C_SYMBOL_NAME(_gcry_mpih_sub_n)
-C_SYMBOL_NAME(_gcry_mpih_sub_n:)
-
- pxor %mm0, %mm0
-.Lstart_nc:
- movl 8(%esp), %eax
- movl %ebx, 8(%esp)
- movl 12(%esp), %ebx
- movl 4(%esp), %edx
- movl 16(%esp), %ecx
-
- leal (%eax,%ecx,4), %eax
- leal (%ebx,%ecx,4), %ebx
- leal (%edx,%ecx,4), %edx
- negl %ecx
-
-.Ltop:
-/*
- C eax src1 end
- C ebx src2 end
- C ecx counter, limbs, negative
- C edx dst end
- C mm0 carry bit
-*/
-
- movd (%eax,%ecx,4), %mm1
- movd (%ebx,%ecx,4), %mm2
- psubq %mm2, %mm1
-
- psubq %mm0, %mm1
- movd %mm1, (%edx,%ecx,4)
-
- psrlq $63, %mm1
-
- addl $1, %ecx
- jz .Ldone_mm1
-
- movd (%eax,%ecx,4), %mm0
- movd (%ebx,%ecx,4), %mm2
- psubq %mm2, %mm0
-
- psubq %mm1, %mm0
- movd %mm0, (%edx,%ecx,4)
-
- psrlq $63, %mm0
-
- addl $1, %ecx
- jnz .Ltop
-
-
- movd %mm0, %eax
- movl 8(%esp), %ebx
- emms
- ret
-
-
-
-.Ldone_mm1:
- movd %mm1, %eax
- movl 8(%esp), %ebx
- emms
- ret
--
2.32.0


_______________________________________________
Gcrypt-devel mailing list
Gcrypt-devel@gnupg.org
http://lists.gnupg.org/mailman/listinfo/gcrypt-devel