I've been attempting to get a 3ware 8506 64bit PCI card to work in a B2000,
running Gentoo 2006.something, under kernel 2.6.19.1-pa0. I've been unable to
do so to date. The machine kernel panics when the 3ware 8000/9000 series
driver is compiled in to the kernel, or loaded as a module. Below is a crash
dump from the machines latest boot attempt. The backtrace is the same in both
a 64bit slot and a 32bit slot. The backtrace is also the same when the driver
is compiled directly into the kernel.
-------
* Letting udev process events ...3ware Storage Controller device driver for
Linux v1.26.02.001.
Backtrace:
[<10112c00>] inl+0x50/0x74
[<00326994>] tw_poll_status_gone+0xe4/0x174 [3w_xxxx]
[<0032745c>] tw_reset_sequence+0x440/0xafc [3w_xxxx]
[<00327ce4>] tw_probe+0x1cc/0x3a4 [3w_xxxx]
[<102e3c08>] pci_device_probe+0x70/0x94
[<1032cb18>] really_probe+0x68/0x144
[<1032ceb8>] __driver_attach+0xe4/0xf4
[<1032bf0c>] bus_for_each_dev+0x60/0x9c
[<1032c320>] bus_add_driver+0x90/0x1a4
[<102e3e1c>] __pci_register_driver+0x5c/0xa4
[<10146db4>] sys_init_module+0x1ac/0x1418
[<1010c134>] syscall_exit+0x0/0x14
High Priority Machine Check (HPMC): Code=1 regs=105ab080 (Addr=00000000)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111111100001111 Not tainted
r00-03 0004ff0f 105a0010 10112c00 13027992
r04-07 373da2b4 ffff273c 105b9810 ffff09f0
r08-11 00004000 105b9810 009c0000 0031e5fc
r12-15 00000000 00000000 00000000 00000124
r16-19 0031e5d4 0031e5ac 37953ec0 00020000
r20-23 ffffffff 00000005 102ea5a0 00000000
r24-27 00000001 00002104 10db5ec0 105a1010
r28-31 105c5c70 0000377c 36de45c0 10112c00
sr00-03 00000000 0000017a 00000000 00000f60
sr04-07 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 102ea5ac 102ea5b0
IIR: 0e79009c ISR: a627fffb IOR: 80822104
CPU: 0 CR30: 36de4000 CR31: 106d0000
ORIG_R28: 00000000
IAOQ[0]: lba_astro_in32+0xc/0x20
IAOQ[1]: lba_astro_in32+0x10/0x20
RP(r2): inl+0x50/0x74
Kernel panic - not syncing: High Priority Machine Check (HPMC)
----------------
I realize that this information might not be of much use, so please let me
know what I need to provide to help with this. If needed, I can provide
access to the machine so developers can poke around with things.
Thank you for your time,
Zach
--
gentoo-hppa@gentoo.org mailing list
running Gentoo 2006.something, under kernel 2.6.19.1-pa0. I've been unable to
do so to date. The machine kernel panics when the 3ware 8000/9000 series
driver is compiled in to the kernel, or loaded as a module. Below is a crash
dump from the machines latest boot attempt. The backtrace is the same in both
a 64bit slot and a 32bit slot. The backtrace is also the same when the driver
is compiled directly into the kernel.
-------
* Letting udev process events ...3ware Storage Controller device driver for
Linux v1.26.02.001.
Backtrace:
[<10112c00>] inl+0x50/0x74
[<00326994>] tw_poll_status_gone+0xe4/0x174 [3w_xxxx]
[<0032745c>] tw_reset_sequence+0x440/0xafc [3w_xxxx]
[<00327ce4>] tw_probe+0x1cc/0x3a4 [3w_xxxx]
[<102e3c08>] pci_device_probe+0x70/0x94
[<1032cb18>] really_probe+0x68/0x144
[<1032ceb8>] __driver_attach+0xe4/0xf4
[<1032bf0c>] bus_for_each_dev+0x60/0x9c
[<1032c320>] bus_add_driver+0x90/0x1a4
[<102e3e1c>] __pci_register_driver+0x5c/0xa4
[<10146db4>] sys_init_module+0x1ac/0x1418
[<1010c134>] syscall_exit+0x0/0x14
High Priority Machine Check (HPMC): Code=1 regs=105ab080 (Addr=00000000)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111111100001111 Not tainted
r00-03 0004ff0f 105a0010 10112c00 13027992
r04-07 373da2b4 ffff273c 105b9810 ffff09f0
r08-11 00004000 105b9810 009c0000 0031e5fc
r12-15 00000000 00000000 00000000 00000124
r16-19 0031e5d4 0031e5ac 37953ec0 00020000
r20-23 ffffffff 00000005 102ea5a0 00000000
r24-27 00000001 00002104 10db5ec0 105a1010
r28-31 105c5c70 0000377c 36de45c0 10112c00
sr00-03 00000000 0000017a 00000000 00000f60
sr04-07 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 102ea5ac 102ea5b0
IIR: 0e79009c ISR: a627fffb IOR: 80822104
CPU: 0 CR30: 36de4000 CR31: 106d0000
ORIG_R28: 00000000
IAOQ[0]: lba_astro_in32+0xc/0x20
IAOQ[1]: lba_astro_in32+0x10/0x20
RP(r2): inl+0x50/0x74
Kernel panic - not syncing: High Priority Machine Check (HPMC)
----------------
I realize that this information might not be of much use, so please let me
know what I need to provide to help with this. If needed, I can provide
access to the machine so developers can poke around with things.
Thank you for your time,
Zach
--
gentoo-hppa@gentoo.org mailing list