Mailing List Archive: issues with RPI3

issues with RPI3

Jul 29, 2016, 9:25 PM

Post #1 of 4 (2595 views)

I have gentoo on my RPI3. I am running into issues with the install. I
cannot emerge anything and some commands will not run. When I emerge I get
warnings that bzip2 cannot be found. However I see the file is /usr/bin.
Here are some examples

localhost ~ # bzip2
> -bash: /usr/bin/bzip2: No such file or directory
> localhost ~ # whereis bzip2
> bzip2: /usr/bin/bzip2 /bin/bzip2 /usr/share/man/man1/bzip2.1
> /usr/share/man/man1/bzip2.1.gz
> localhost ~ # file bzip2
> bzip2: cannot open `bzip2' (No such file or directory)
> localhost ~ # file /usr/bin/bzip2
> /usr/bin/bzip2: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> dynamically linked, interpreter /lib/ld-linux.so.3, for GNU/Linux 2.6.27,
> BuildID[sha1]=1e1317befeb837f9059eacbef1ca926a4b4f246c, stripped
> localhost ~ # ld /usr/bin/bzip2
> ld: warning: cannot find entry symbol _start; defaulting to 00011300
> localhost ~ # ldd /usr/bin/bzip2
> /usr/bin/ldd: line 116: /usr/bin/bzip2: No such file or directory
>

I used the following stage 3: stage3-armv7a_hardfp-20160523.tar.bz

Here is my *emerge info* <http://pastebin.com/mgMJ2mBa>

I tried emerging strace and that failed here is the *build log*
<http://pastebin.com/yud95Y3H>

Any thoughts?

Re: issues with RPI3 [ In reply to ]

Meino.Cramer at gmx

Jul 30, 2016, 1:56 AM

Post #2 of 4 (2587 views)

Permalink

Herminio Hernandez, Jr. <herminio.hernandezjr@gmail.com> [16-07-30 06:32]:
> I have gentoo on my RPI3. I am running into issues with the install. I
> cannot emerge anything and some commands will not run. When I emerge I get
> warnings that bzip2 cannot be found. However I see the file is /usr/bin.
> Here are some examples
>
> localhost ~ # bzip2
> > -bash: /usr/bin/bzip2: No such file or directory
> > localhost ~ # whereis bzip2
> > bzip2: /usr/bin/bzip2 /bin/bzip2 /usr/share/man/man1/bzip2.1
> > /usr/share/man/man1/bzip2.1.gz
> > localhost ~ # file bzip2
> > bzip2: cannot open `bzip2' (No such file or directory)
> > localhost ~ # file /usr/bin/bzip2
> > /usr/bin/bzip2: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> > dynamically linked, interpreter /lib/ld-linux.so.3, for GNU/Linux 2.6.27,
> > BuildID[sha1]=1e1317befeb837f9059eacbef1ca926a4b4f246c, stripped
> > localhost ~ # ld /usr/bin/bzip2
> > ld: warning: cannot find entry symbol _start; defaulting to 00011300
> > localhost ~ # ldd /usr/bin/bzip2
> > /usr/bin/ldd: line 116: /usr/bin/bzip2: No such file or directory
> >
>
> I used the following stage 3: stage3-armv7a_hardfp-20160523.tar.bz
>
> Here is my *emerge info* <http://pastebin.com/mgMJ2mBa>
>
> I tried emerging strace and that failed here is the *build log*
> <http://pastebin.com/yud95Y3H>
>
> Any thoughts?

Hi,

check the output of

echo $PATH

of root and check, whether it contains the directories in which
the binaries could be found, which cannot be executed.

HTH!
:)

Best regards,
Meino

Re: issues with RPI3 [ In reply to ]

herminio.hernandezjr at gmail

Jul 30, 2016, 2:01 AM

Post #3 of 4 (2587 views)

Permalink

The problem was with the SSD I made. I deleted it and rebuilt. Now all is working. I am currently updating @world.

Sent from my iPhone

> On Jul 30, 2016, at 1:56 AM, Meino.Cramer@gmx.de wrote:
>
> Herminio Hernandez, Jr. <herminio.hernandezjr@gmail.com> [16-07-30 06:32]:
>> I have gentoo on my RPI3. I am running into issues with the install. I
>> cannot emerge anything and some commands will not run. When I emerge I get
>> warnings that bzip2 cannot be found. However I see the file is /usr/bin.
>> Here are some examples
>>
>> localhost ~ # bzip2
>>> -bash: /usr/bin/bzip2: No such file or directory
>>> localhost ~ # whereis bzip2
>>> bzip2: /usr/bin/bzip2 /bin/bzip2 /usr/share/man/man1/bzip2.1
>>> /usr/share/man/man1/bzip2.1.gz
>>> localhost ~ # file bzip2
>>> bzip2: cannot open `bzip2' (No such file or directory)
>>> localhost ~ # file /usr/bin/bzip2
>>> /usr/bin/bzip2: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
>>> dynamically linked, interpreter /lib/ld-linux.so.3, for GNU/Linux 2.6.27,
>>> BuildID[sha1]=1e1317befeb837f9059eacbef1ca926a4b4f246c, stripped
>>> localhost ~ # ld /usr/bin/bzip2
>>> ld: warning: cannot find entry symbol _start; defaulting to 00011300
>>> localhost ~ # ldd /usr/bin/bzip2
>>> /usr/bin/ldd: line 116: /usr/bin/bzip2: No such file or directory
>>
>> I used the following stage 3: stage3-armv7a_hardfp-20160523.tar.bz
>>
>> Here is my *emerge info* <http://pastebin.com/mgMJ2mBa>
>>
>> I tried emerging strace and that failed here is the *build log*
>> <http://pastebin.com/yud95Y3H>
>>
>> Any thoughts?
>
> Hi,
>
> check the output of
>
> echo $PATH
>
> of root and check, whether it contains the directories in which
> the binaries could be found, which cannot be executed.
>
> HTH!
> :)
>
> Best regards,
> Meino
>
>
>
>

Re: issues with RPI3 [ In reply to ]

Meino.Cramer at gmx

Jul 30, 2016, 2:18 AM

Post #4 of 4 (2586 views)

Permalink

Yeah! Good news! :)

Have a nice weekend!
Best regards,
Meino

Herminio Hernandez Jr. <herminio.hernandezjr@gmail.com> [16-07-30 11:12]:
> The problem was with the SSD I made. I deleted it and rebuilt. Now all is working. I am currently updating @world.
>
> Sent from my iPhone
>
> > On Jul 30, 2016, at 1:56 AM, Meino.Cramer@gmx.de wrote:
> >
> > Herminio Hernandez, Jr. <herminio.hernandezjr@gmail.com> [16-07-30 06:32]:
> >> I have gentoo on my RPI3. I am running into issues with the install. I
> >> cannot emerge anything and some commands will not run. When I emerge I get
> >> warnings that bzip2 cannot be found. However I see the file is /usr/bin.
> >> Here are some examples
> >>
> >> localhost ~ # bzip2
> >>> -bash: /usr/bin/bzip2: No such file or directory
> >>> localhost ~ # whereis bzip2
> >>> bzip2: /usr/bin/bzip2 /bin/bzip2 /usr/share/man/man1/bzip2.1
> >>> /usr/share/man/man1/bzip2.1.gz
> >>> localhost ~ # file bzip2
> >>> bzip2: cannot open `bzip2' (No such file or directory)
> >>> localhost ~ # file /usr/bin/bzip2
> >>> /usr/bin/bzip2: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> >>> dynamically linked, interpreter /lib/ld-linux.so.3, for GNU/Linux 2.6.27,
> >>> BuildID[sha1]=1e1317befeb837f9059eacbef1ca926a4b4f246c, stripped
> >>> localhost ~ # ld /usr/bin/bzip2
> >>> ld: warning: cannot find entry symbol _start; defaulting to 00011300
> >>> localhost ~ # ldd /usr/bin/bzip2
> >>> /usr/bin/ldd: line 116: /usr/bin/bzip2: No such file or directory
> >>
> >> I used the following stage 3: stage3-armv7a_hardfp-20160523.tar.bz
> >>
> >> Here is my *emerge info* <http://pastebin.com/mgMJ2mBa>
> >>
> >> I tried emerging strace and that failed here is the *build log*
> >> <http://pastebin.com/yud95Y3H>
> >>
> >> Any thoughts?
> >
> > Hi,
> >
> > check the output of
> >
> > echo $PATH
> >
> > of root and check, whether it contains the directories in which
> > the binaries could be found, which cannot be executed.
> >
> > HTH!
> > :)
> >
> > Best regards,
> > Meino
> >
> >
> >
> >
>