This is what I've been asked to set up:
"[ A way to ] .. SSH to the server and then run script to get a console
session on a connected device OR ssh directly to a defined TCP port and
get a "direct" connection to the serial device without executing a
script at a shell"
I think that conserver can do this, and if I understand correctly, very
elegantly, but the configuration options are so numerous that I have no
idea how to set up the config file. I've managed to puzzle through
getting the special serial port hardware ( an 8 port panel by perle )
set up, and I've verified that the ports work via minicom / terminal,
but when I try to start conserver:
conserver: conserver.com version 8.1.16
conserver: default access type `r'
conserver: default escape sequence `^Ec'
conserver: default configuration in `/usr/local/etc/conserver.cf'
conserver: default password in `/usr/local/etc/conserver.passwd'
conserver: default logfile is `/var/log/conserver'
conserver: default pidfile is `/var/run/conserver.pid'
conserver: default limit is 16 members per group
conserver: default primary port referenced as `conserver'
conserver: default secondary base port referenced as `0'
conserver: options: openssl
conserver: openssl version: OpenSSL 0.9.8c 05 Sep 2006
conserver: built with `./configure --with-openssl
-- which is perfectly understandable, as I haven't told conserver that
the ports I want to use for this are /dev/ttyPS0-/dev/ttyPS7. The
config files that I've found so far are way overkill for what I think I
want to do... Can I get a 'dummies' version of the manpage?
Thanks!
--J.
_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users
"[ A way to ] .. SSH to the server and then run script to get a console
session on a connected device OR ssh directly to a defined TCP port and
get a "direct" connection to the serial device without executing a
script at a shell"
I think that conserver can do this, and if I understand correctly, very
elegantly, but the configuration options are so numerous that I have no
idea how to set up the config file. I've managed to puzzle through
getting the special serial port hardware ( an 8 port panel by perle )
set up, and I've verified that the ports work via minicom / terminal,
but when I try to start conserver:
conserver: conserver.com version 8.1.16
conserver: default access type `r'
conserver: default escape sequence `^Ec'
conserver: default configuration in `/usr/local/etc/conserver.cf'
conserver: default password in `/usr/local/etc/conserver.passwd'
conserver: default logfile is `/var/log/conserver'
conserver: default pidfile is `/var/run/conserver.pid'
conserver: default limit is 16 members per group
conserver: default primary port referenced as `conserver'
conserver: default secondary base port referenced as `0'
conserver: options: openssl
conserver: openssl version: OpenSSL 0.9.8c 05 Sep 2006
conserver: built with `./configure --with-openssl
-- which is perfectly understandable, as I haven't told conserver that
the ports I want to use for this are /dev/ttyPS0-/dev/ttyPS7. The
config files that I've found so far are way overkill for what I think I
want to do... Can I get a 'dummies' version of the manpage?
Thanks!
--J.
_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users