Mailing List Archive

You are describing the difference between an 'allowed' connection,
and a 'trusted' connection. :-)

In your conserver.cf file, at the bottom, try adding the IP address of
the machine you are using the client from, and denoting it as "trusted".
This presumes that you have faith in the authentication on the 'client',
so then Conserver will not challenge you again for the password as you
connect through the server. :-)

-Z-

David 'Zonker' Harris
Silicon Valley Service Delivery Center, Network Operations

Siemens IT Solutions and Services, Inc.
Infrastructure Management Services
39600 Eureka Drive
Newark, CA 94560
Tel: 510 624-5524
Mob: 510 648-0701
Fax: 510 624-5508
mailto: david.k.harris@siemens.com
www.usa.siemens.com/it-solutions


-----Original Message-----
From: users-bounces@conserver.com [mailto:users-bounces@conserver.com]
On Behalf Of Lisa Doherty
Sent: Monday, September 24, 2007 1:01 PM
To: users@conserver.com
Subject: console connection prompts for root password

I'm new to this list and to conserver. I have just set up an OpenGear
CM4148 console server attached to a single conserver client machine
running RedHat AS 4. Things seem to be working fine, but I'd like to
make a change to the password behavior.

Currently, I log in to the conserver client machine and attach to
"console fred". The MOTD appears and I have to press the Enter key to
continue. The I am prompted for a root password. Once I enter that, I
get a console login prompt "fred console login: ". Is there a way to
configure conserver so that there is not a prompt for the root password
before receiving the console login prompt?

I would like to be able to just attach to the console using "console
fred" and get the "fred console login: " prompt without having any
other password prompt in between.

Any help is appreciated,

Lisa
_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users
_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users

Thank you. Things are working as expected now.

Lisa

Harris, David (IT Solutions US) wrote:
> You are describing the difference between an 'allowed' connection,
> and a 'trusted' connection. :-)
>
> In your conserver.cf file, at the bottom, try adding the IP address of
> the machine you are using the client from, and denoting it as "trusted".
> This presumes that you have faith in the authentication on the 'client',
> so then Conserver will not challenge you again for the password as you
> connect through the server. :-)
>
> -Z-
>
> David 'Zonker' Harris
> Silicon Valley Service Delivery Center, Network Operations
>
> Siemens IT Solutions and Services, Inc.
> Infrastructure Management Services
> 39600 Eureka Drive
> Newark, CA 94560
> Tel: 510 624-5524
> Mob: 510 648-0701
> Fax: 510 624-5508
> mailto: david.k.harris@siemens.com
> www.usa.siemens.com/it-solutions
>
>
> -----Original Message-----
> From: users-bounces@conserver.com [mailto:users-bounces@conserver.com]
> On Behalf Of Lisa Doherty
> Sent: Monday, September 24, 2007 1:01 PM
> To: users@conserver.com
> Subject: console connection prompts for root password
>
> I'm new to this list and to conserver. I have just set up an OpenGear
> CM4148 console server attached to a single conserver client machine
> running RedHat AS 4. Things seem to be working fine, but I'd like to
> make a change to the password behavior.
>
> Currently, I log in to the conserver client machine and attach to
> "console fred". The MOTD appears and I have to press the Enter key to
> continue. The I am prompted for a root password. Once I enter that, I
> get a console login prompt "fred console login: ". Is there a way to
> configure conserver so that there is not a prompt for the root password
> before receiving the console login prompt?
>
> I would like to be able to just attach to the console using "console
> fred" and get the "fred console login: " prompt without having any
> other password prompt in between.
>
> Any help is appreciated,
>
> Lisa
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users
>
_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users