Mailing List Archive

You can have a different ring-tone per line. You could use the route call
based on calling party number to send calls from a specific number to a
different line on the phone.

On Fri, Feb 4, 2022 at 11:31 AM James Dust <james.dust@charles-stanley.co.uk>
wrote:

> Afternoon all,
>
>
>
> I have been asked if it is possible to have a different ring tone on a
> Cisco 8851 when a specific CLI calls it? (so not the selected ring tone)
>
>
>
> We are using CUCM 12.5
>
>
>
> I personally I have never heard of this, but I though I’d ask.
>
>
>
> Thanks allot
>
>
>
> James
>
> *Consider the environment - Think before you print*
>
> The contents of this email are confidential to the intended recipient and
> may not be disclosed. Although it is believed that this email and any
> attachments are virus free, it is the responsibility of the recipient to
> confirm this.
>
> You are advised that urgent, time-sensitive communications should not be
> sent by email. We hereby give you notice that a delivery receipt does not
> constitute acknowledgement or receipt by the intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators (where
> applicable), can be found at this URL
> http://www.charles-stanley.co.uk/contact-us/disclosure/
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

Thanks allot for your help Brian,

Regards

James

From: Brian Meade <bmeade90@vt.edu>
Sent: 04 February 2022 20:47
To: James Dust <james.dust@charles-stanley.co.uk>
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] 8851 phone question

This message originates from outside Charles Stanley. Please do not click links or open attachments unless you know the sender and are confident the content is safe.


You can have a different ring-tone per line. You could use the route call based on calling party number to send calls from a specific number to a different line on the phone.

On Fri, Feb 4, 2022 at 11:31 AM James Dust <james.dust@charles-stanley.co.uk<mailto:james.dust@charles-stanley.co.uk>> wrote:
Afternoon all,

I have been asked if it is possible to have a different ring tone on a Cisco 8851 when a specific CLI calls it? (so not the selected ring tone)

We are using CUCM 12.5

I personally I have never heard of this, but I though I’d ask.

Thanks allot

James

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/