Mailing List Archive

CUCM 11.5 and SNMP
In CUCM 11.5 under Serviceability > SNMP > Accept SNMP Packes only for these hosts I noticed you can't enter a subnet mask. So If I only want to permit SNMP form 10.10.128.0/24 can I limit SNMP based on subnet? Or is it only exact hosts. Help for this page doesn't really elaborate.

Is 10.0.0.0 the whole Class A or just the exact host 10.0.0.0 ?


[cid:image001.png@01D51EF1.0FF7B020]

Jason Aarons, CCIEx2 No. 38564, MCSE: Communications
Advanced Technology Consultant

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer"
Re: CUCM 11.5 and SNMP [ In reply to ]
I don't believe that field allows any sort of subnet. It's /32 IP's only
from my testing.

There's a feature enhancement request to add the ability to add more than
one IP at once but doesn't mentioned by subnet-
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvn52086

On Sun, Jun 9, 2019 at 6:31 PM Jason Aarons (Americas) <
jason.aarons@dimensiondata.com> wrote:

>
>
> In CUCM 11.5 under Serviceability > SNMP > Accept SNMP Packes only for
> these hosts I noticed you can’t enter a subnet mask. So If I only want to
> permit SNMP form 10.10.128.0/24 can I limit SNMP based on subnet? Or is
> it only exact hosts. Help for this page doesn’t really elaborate.
>
>
>
> Is 10.0.0.0 the whole Class A or just the exact host 10.0.0.0 ?
>
>
>
>
>
>
>
> Jason Aarons, CCIEx2 No. 38564, MCSE: Communications
>
> Advanced Technology Consultant
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer"
> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>