dear matthew,
thank's for your answer and for your help.
now i can find max call duration, but it is for all call, what if i just want to set max call duration just for outgoing calls to PSTN only? and setting only special user like director doesn't have maximum call duration?
Regards,
Arnold Samuel Lesar
------------------------------------------------------
Note: This message was created by ARNOLD SAMUEL LESAR.
------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
PT. PELITA RELIANCE INTERNATIONAL
Eka Hospital BSD City, Tangerang
Address : CBD Lot IX, BSD City, Tangerang
Phone : (+62-21) 256 555 55
Fax : (+62-21) 256 555 44
--------------------------------------------------------------------------
--------------------------------------------------------------------------
________________________________
From: Matthew Saskin <msaskin@gmail.com>
To: Arnold Lesar <arnoldlesar@yahoo.co.uk>
Sent: Fri, 5 March, 2010 20:51:06
Subject: Re: [cisco-voip] create automatic disconnected
Arnold -
The following link should assist you in how to change service parameters:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b02svprm.html#wpxref88354
The service parameter you want, as I recall, is labeled "Maximum Call Timer" and is a parameter of the "CallManager" service.
Matthew Saskin
msaskin@gmail.com
203-253-9571
July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin
On Thu, Mar 4, 2010 at 10:57 PM, Arnold Lesar <arnoldlesar@yahoo.co.uk> wrote:
dear mr matthew,
>
>where can i find that service parameter for the maximum call length
>
> GBU
>
>
>
>
>Regards,
>
>
>Arnold Samuel Lesar
>
>
>------------------------------------------------------
>Note: This message was created by ARNOLD SAMUEL LESAR.
>------------------------------------------------------
>
>
>--------------------------------------------------------------------------
>--------------------------------------------------------------------------
>PT. PELITA RELIANCE INTERNATIONAL
>Eka Hospital BSD City, Tangerang
>>Address : CBD Lot IX, BSD City, Tangerang
>Phone : (+62-21) 256 555 55
>Fax : (+62-21) 256 555 44
>--------------------------------------------------------------------------
>--------------------------------------------------------------------------
>
>
>
>
>
>
________________________________
From: Matthew Saskin <msaskin@gmail.com>
>To: Arnold Lesar <arnoldlesar@yahoo.co.uk>
>Cc: VoIPgroup <cisco-voip@puck.nether.net>
>Sent: Thu, 4 March, 2010 20:28:26
>Subject: Re: [cisco-voip] create automatic disconnected
>
>
>
>Arnold -
>
>Your only option is a service parameter for the maximum call length, which will disconnect calls after a certain period of time. It's not granular, so it's an all or nothing setting. I believe the default is either 8 or 12 hours, but is configurable in number of minutes.
>
>Matthew Saskin
>msaskin@gmail.com
>203-253-9571
>
>July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
>Please support the Leukemia & Lyphoma Society
>http://pages.teamintraining.org/nyc/nyctri10/msaskin
>
>
>
>On Wed, Mar 3, 2010 at 10:22 PM, Arnold Lesar <arnoldlesar@yahoo.co.uk> wrote:
>
>Dear all,
>>
>>how to create automatic disconnect in ccm 4.0?
>>for example :
>>the user can call for only 15 minutes after that the phone disconnected.
>>
>>Regards,
>>
>>
>>Arnold Samuel Lesar
>>
>>
>>------------------------------------------------------
>>Note: This message was created by ARNOLD SAMUEL LESAR.
>>------------------------------------------------------
>>
>>
>>--------------------------------------------------------------------------
>>--------------------------------------------------------------------------
>>PT. PELITA RELIANCE INTERNATIONAL
>>Eka Hospital BSD City, Tangerang
>>>>Address : CBD Lot IX, BSD City, Tangerang
>>Phone : (+62-21) 256 555 55
>>Fax : (+62-21) 256 555 44
>>--------------------------------------------------------------------------
>>--------------------------------------------------------------------------
>>
>>
>>
>>
>>_______________________________________________
>>cisco-voip mailing list
>>cisco-voip@puck.nether.net
>>htArntps://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
thank's for your answer and for your help.
now i can find max call duration, but it is for all call, what if i just want to set max call duration just for outgoing calls to PSTN only? and setting only special user like director doesn't have maximum call duration?
Regards,
Arnold Samuel Lesar
------------------------------------------------------
Note: This message was created by ARNOLD SAMUEL LESAR.
------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
PT. PELITA RELIANCE INTERNATIONAL
Eka Hospital BSD City, Tangerang
Address : CBD Lot IX, BSD City, Tangerang
Phone : (+62-21) 256 555 55
Fax : (+62-21) 256 555 44
--------------------------------------------------------------------------
--------------------------------------------------------------------------
________________________________
From: Matthew Saskin <msaskin@gmail.com>
To: Arnold Lesar <arnoldlesar@yahoo.co.uk>
Sent: Fri, 5 March, 2010 20:51:06
Subject: Re: [cisco-voip] create automatic disconnected
Arnold -
The following link should assist you in how to change service parameters:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b02svprm.html#wpxref88354
The service parameter you want, as I recall, is labeled "Maximum Call Timer" and is a parameter of the "CallManager" service.
Matthew Saskin
msaskin@gmail.com
203-253-9571
July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin
On Thu, Mar 4, 2010 at 10:57 PM, Arnold Lesar <arnoldlesar@yahoo.co.uk> wrote:
dear mr matthew,
>
>where can i find that service parameter for the maximum call length
>
> GBU
>
>
>
>
>Regards,
>
>
>Arnold Samuel Lesar
>
>
>------------------------------------------------------
>Note: This message was created by ARNOLD SAMUEL LESAR.
>------------------------------------------------------
>
>
>--------------------------------------------------------------------------
>--------------------------------------------------------------------------
>PT. PELITA RELIANCE INTERNATIONAL
>Eka Hospital BSD City, Tangerang
>>Address : CBD Lot IX, BSD City, Tangerang
>Phone : (+62-21) 256 555 55
>Fax : (+62-21) 256 555 44
>--------------------------------------------------------------------------
>--------------------------------------------------------------------------
>
>
>
>
>
>
________________________________
From: Matthew Saskin <msaskin@gmail.com>
>To: Arnold Lesar <arnoldlesar@yahoo.co.uk>
>Cc: VoIPgroup <cisco-voip@puck.nether.net>
>Sent: Thu, 4 March, 2010 20:28:26
>Subject: Re: [cisco-voip] create automatic disconnected
>
>
>
>Arnold -
>
>Your only option is a service parameter for the maximum call length, which will disconnect calls after a certain period of time. It's not granular, so it's an all or nothing setting. I believe the default is either 8 or 12 hours, but is configurable in number of minutes.
>
>Matthew Saskin
>msaskin@gmail.com
>203-253-9571
>
>July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
>Please support the Leukemia & Lyphoma Society
>http://pages.teamintraining.org/nyc/nyctri10/msaskin
>
>
>
>On Wed, Mar 3, 2010 at 10:22 PM, Arnold Lesar <arnoldlesar@yahoo.co.uk> wrote:
>
>Dear all,
>>
>>how to create automatic disconnect in ccm 4.0?
>>for example :
>>the user can call for only 15 minutes after that the phone disconnected.
>>
>>Regards,
>>
>>
>>Arnold Samuel Lesar
>>
>>
>>------------------------------------------------------
>>Note: This message was created by ARNOLD SAMUEL LESAR.
>>------------------------------------------------------
>>
>>
>>--------------------------------------------------------------------------
>>--------------------------------------------------------------------------
>>PT. PELITA RELIANCE INTERNATIONAL
>>Eka Hospital BSD City, Tangerang
>>>>Address : CBD Lot IX, BSD City, Tangerang
>>Phone : (+62-21) 256 555 55
>>Fax : (+62-21) 256 555 44
>>--------------------------------------------------------------------------
>>--------------------------------------------------------------------------
>>
>>
>>
>>
>>_______________________________________________
>>cisco-voip mailing list
>>cisco-voip@puck.nether.net
>>htArntps://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>