Mailing List Archive

Hello Hunter,

It does respond to ping and all other functions are working including
responding to SNMP RO and RW.

-Lee

On Sat, Feb 27, 2021 at 12:31 PM Hunter Fuller <hf0002@uah.edu> wrote:

> I have no idea, but just curious, does the box respond to other
> control plane traffic from outside, like pings?
>
> --
> Hunter Fuller (they)
> Router Jockey
> VBH Annex B-5
> +1 256 824 5331
>
> Office of Information Technology
> The University of Alabama in Huntsville
> Network Engineering
>
> On Sat, Feb 27, 2021 at 1:05 PM Lee Starnes <lee.t.starnes@gmail.com>
> wrote:
> >
> > Hello all,
> >
> > Ran into an issue that I can't seem to resolve and really don't want to
> > reboot the chassis. Have 1 of our 6509-e units that has decided it is not
> > going to allow connections to it via ssh or telnet. I can get access via
> > console. When trying to connect, you do not get connection refused. You
> > just hang for several seconds before getting a connection timed out
> > message.
> >
> > On the switch, I show no connection attempts.
> >
> > A check to see if the ssh server is running and have any connections
> shows
> > normal.
> > #sh ip ssh
> > SSH Enabled - version 1.99
> > Authentication timeout: 120 secs; Authentication retries: 3
> > #sh ssh
> > %No SSHv1 server connections running.
> > %No SSHv2 server connections running.
> >
> > Doing debugs, I see nothing show up for connection attempts. Also if I
> > attempt to connect to itself from itself it also just hangs before
> getting
> > a connection timed out message. I would expect the normal response of
> > connection refused when trying to connect to itself.
> >
> > There is an ACL in place on the VTY lines and even removing that, still
> > gets the same results. I have removed the input transport on the vty
> lines
> > and then read added them.
> >
> > Is there anything else I can try before having to reboot/switch to the
> > standby SUP?
> >
> > This was all working normally until sometime around 4am. and nothing was
> > logged before or after the issue started other than my login via console
> > and various changes/commands issued in an attempt to debug/resolve this
> > issue.
> >
> > Any help would be greatly appreciated.
> >
> > -Lee
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Is it out of memory? That could keep it from being able to create vty
sessions. You should see log entries.

Chuck

On Sat, Feb 27, 2021, 5:49 PM Lee Starnes <lee.t.starnes@gmail.com> wrote:

> Hello Hunter,
>
> It does respond to ping and all other functions are working including
> responding to SNMP RO and RW.
>
> -Lee
>
> On Sat, Feb 27, 2021 at 12:31 PM Hunter Fuller <hf0002@uah.edu> wrote:
>
> > I have no idea, but just curious, does the box respond to other
> > control plane traffic from outside, like pings?
> >
> > --
> > Hunter Fuller (they)
> > Router Jockey
> > VBH Annex B-5
> > +1 256 824 5331
> >
> > Office of Information Technology
> > The University of Alabama in Huntsville
> > Network Engineering
> >
> > On Sat, Feb 27, 2021 at 1:05 PM Lee Starnes <lee.t.starnes@gmail.com>
> > wrote:
> > >
> > > Hello all,
> > >
> > > Ran into an issue that I can't seem to resolve and really don't want to
> > > reboot the chassis. Have 1 of our 6509-e units that has decided it is
> not
> > > going to allow connections to it via ssh or telnet. I can get access
> via
> > > console. When trying to connect, you do not get connection refused. You
> > > just hang for several seconds before getting a connection timed out
> > > message.
> > >
> > > On the switch, I show no connection attempts.
> > >
> > > A check to see if the ssh server is running and have any connections
> > shows
> > > normal.
> > > #sh ip ssh
> > > SSH Enabled - version 1.99
> > > Authentication timeout: 120 secs; Authentication retries: 3
> > > #sh ssh
> > > %No SSHv1 server connections running.
> > > %No SSHv2 server connections running.
> > >
> > > Doing debugs, I see nothing show up for connection attempts. Also if I
> > > attempt to connect to itself from itself it also just hangs before
> > getting
> > > a connection timed out message. I would expect the normal response of
> > > connection refused when trying to connect to itself.
> > >
> > > There is an ACL in place on the VTY lines and even removing that, still
> > > gets the same results. I have removed the input transport on the vty
> > lines
> > > and then read added them.
> > >
> > > Is there anything else I can try before having to reboot/switch to the
> > > standby SUP?
> > >
> > > This was all working normally until sometime around 4am. and nothing
> was
> > > logged before or after the issue started other than my login via
> console
> > > and various changes/commands issued in an attempt to debug/resolve this
> > > issue.
> > >
> > > Any help would be greatly appreciated.
> > >
> > > -Lee
> > > _______________________________________________
> > > cisco-nsp mailing list cisco-nsp@puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/