Hi,
this is a little bit off-topic but perhaps someone solved this already:
Regarding Cisco WLAN-Controllers and CAPWAP Access-points,
I am seeking the snmp way to get the "NAT External IP Address"
shown in the CLI output (and also visiblae in the web-interface):
(Cisco Controller) >show ap config general JM-TEST
Cisco AP Identifier.............................. 19
Cisco AP Name.................................... JM-TEST
Country code..................................... DE - Germany
[...]
MAC Address...................................... 7c:69:f6:04:9a:e2
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.33.169
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.33.254
NAT External IP Address.......................... 21X.1X6.1X3.1XY:1481
CAPWAP Path MTU.................................. 1485
[...]
I think it may bee in the CISCO-LWAPP-TUNNEL-MIB but a snmpwalk fails "index
not increasing"
And many Variables are "NOT ACCESSIBLE" marked ind the .my file
(and I do not know hov to use an unknow octett-string as an index) .
Thank you for any ideas,
J?rgen.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
this is a little bit off-topic but perhaps someone solved this already:
Regarding Cisco WLAN-Controllers and CAPWAP Access-points,
I am seeking the snmp way to get the "NAT External IP Address"
shown in the CLI output (and also visiblae in the web-interface):
(Cisco Controller) >show ap config general JM-TEST
Cisco AP Identifier.............................. 19
Cisco AP Name.................................... JM-TEST
Country code..................................... DE - Germany
[...]
MAC Address...................................... 7c:69:f6:04:9a:e2
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.33.169
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.33.254
NAT External IP Address.......................... 21X.1X6.1X3.1XY:1481
CAPWAP Path MTU.................................. 1485
[...]
I think it may bee in the CISCO-LWAPP-TUNNEL-MIB but a snmpwalk fails "index
not increasing"
And many Variables are "NOT ACCESSIBLE" marked ind the .my file
(and I do not know hov to use an unknow octett-string as an index) .
Thank you for any ideas,
J?rgen.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/