Mailing List Archive

I thought I heard of a feature request for that...but not sure if it really
exists, cant find anything for it.

In my 12.2(10b) 2600 I see this:

joshd(config)#downward-compatible-config ?
<0-999999>.<0-999999> Version number

...which is what you are getting when you put in "do ?"...

josh


----- Original Message -----
From: "Stefan Reelsen" <stefan@reelsen.net>
To: <cisco-nsp@puck.nether.net>
Sent: Monday, July 29, 2002 9:23 AM
Subject: [nsp] configure command "do"


> Hello,
>
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> when enterering "do ?".
> Does anybody know what this means?
>
> Thanks.
>
>
> --
> Best regards,
> Stefan mailto:stefan@reelsen.net
>
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

On Mon, 29 Jul 2002 16:23:04 +0200 Stefan Reelsen <stefan@reelsen.net> wrote:
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> when enterering "do ?".
> Does anybody know what this means?

I don't believe there is any such command. "do" is probably shorthand for
some other command - see what typing "do?" (Without the space) gives.

--
Ryan O'Connell - CCIE #8174
<ryan@complicity.co.uk> - http://www.complicity.co.uk

I'm not losing my mind, no I'm not changing my lines,
I'm just learning new things with the passage of time

I'm running 12.1(11b)E4 and I use the "do" command all the time.

-----Original Message-----
From: Josh Duffek [mailto:jduffek@cisco.com]
Sent: Thursday, August 01, 2002 7:15 PM
To: Stefan Reelsen; cisco-nsp@puck.nether.net
Subject: Re: [nsp] configure command "do"


I thought I heard of a feature request for that...but not sure if it really
exists, cant find anything for it.

In my 12.2(10b) 2600 I see this:

joshd(config)#downward-compatible-config ?
<0-999999>.<0-999999> Version number

...which is what you are getting when you put in "do ?"...

josh


----- Original Message -----
From: "Stefan Reelsen" <stefan@reelsen.net>
To: <cisco-nsp@puck.nether.net>
Sent: Monday, July 29, 2002 9:23 AM
Subject: [nsp] configure command "do"


> Hello,
>
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> when enterering "do ?".
> Does anybody know what this means?
>
> Thanks.
>
>
> --
> Best regards,
> Stefan mailto:stefan@reelsen.net
>
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

there is such a command and it allows you to do any exec level commands
while in global config mode. Very handy and a huge timesaver.

-----Original Message-----
From: Ryan O'Connell [mailto:ryan@complicity.co.uk]
Sent: Friday, August 02, 2002 3:10 AM
To: Stefan Reelsen; cisco-nsp@puck.nether.net
Subject: Re: [nsp] configure command "do"


On Mon, 29 Jul 2002 16:23:04 +0200 Stefan Reelsen <stefan@reelsen.net>
wrote:
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> when enterering "do ?".
> Does anybody know what this means?

I don't believe there is any such command. "do" is probably shorthand for
some other command - see what typing "do?" (Without the space) gives.

--
Ryan O'Connell - CCIE #8174
<ryan@complicity.co.uk> - http://www.complicity.co.uk

I'm not losing my mind, no I'm not changing my lines,
I'm just learning new things with the passage of time

_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Here is the URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft
/121limit/121e/121e11/12e_exe.htm

-----Original Message-----
From: cisco-nsp-admin@puck.nether.net
[mailto:cisco-nsp-admin@puck.nether.net] On Behalf Of Marlow, Travis
Sent: Friday, August 02, 2002 11:03 AM
To: cisco-nsp@puck.nether.net
Subject: RE: [nsp] configure command "do"


there is such a command and it allows you to do any exec level commands
while in global config mode. Very handy and a huge timesaver.

-----Original Message-----
From: Ryan O'Connell [mailto:ryan@complicity.co.uk]
Sent: Friday, August 02, 2002 3:10 AM
To: Stefan Reelsen; cisco-nsp@puck.nether.net
Subject: Re: [nsp] configure command "do"


On Mon, 29 Jul 2002 16:23:04 +0200 Stefan Reelsen <stefan@reelsen.net>
wrote:
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> when enterering "do ?". Does anybody know what this means?

I don't believe there is any such command. "do" is probably shorthand
for some other command - see what typing "do?" (Without the space)
gives.

--
Ryan O'Connell - CCIE #8174
<ryan@complicity.co.uk> - http://www.complicity.co.uk

I'm not losing my mind, no I'm not changing my lines,
I'm just learning new things with the passage of time

_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Looks like it is only in the T train.... It appears to be a new feature and
maybe it will be incorporated into future mainline releases... Nice feature
if you need to see a CLI response like sh int..

Everett




-----Original Message-----
From: cisco-nsp-admin@puck.nether.net
[mailto:cisco-nsp-admin@puck.nether.net]On Behalf Of Ryan O'Connell
Sent: Friday, August 02, 2002 4:10 AM
To: Stefan Reelsen; cisco-nsp@puck.nether.net
Subject: Re: [nsp] configure command "do"

On Mon, 29 Jul 2002 16:23:04 +0200 Stefan Reelsen <stefan@reelsen.net>
wrote:
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> when enterering "do ?".
> Does anybody know what this means?

I don't believe there is any such command. "do" is probably shorthand for
some other command - see what typing "do?" (Without the space) gives.

--
Ryan O'Connell - CCIE #8174
<ryan@complicity.co.uk> - http://www.complicity.co.uk

I'm not losing my mind, no I'm not changing my lines,
I'm just learning new things with the passage of time

_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Surprised it doesn't point to a Juniper URL since it's obviously snarfed
from them 8-)


Matt.

-----Original Message-----
From: Brad Bonin (bbonin) [mailto:brad@cisco.com]
Sent: 02 August 2002 17:27
To: 'Marlow, Travis'; cisco-nsp@puck.nether.net
Subject: RE: [nsp] configure command "do"


Here is the URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft
/121limit/121e/121e11/12e_exe.htm

-----Original Message-----
From: cisco-nsp-admin@puck.nether.net
[mailto:cisco-nsp-admin@puck.nether.net] On Behalf Of Marlow, Travis
Sent: Friday, August 02, 2002 11:03 AM
To: cisco-nsp@puck.nether.net
Subject: RE: [nsp] configure command "do"


there is such a command and it allows you to do any exec level commands
while in global config mode. Very handy and a huge timesaver.

-----Original Message-----
From: Ryan O'Connell [mailto:ryan@complicity.co.uk]
Sent: Friday, August 02, 2002 3:10 AM
To: Stefan Reelsen; cisco-nsp@puck.nether.net
Subject: Re: [nsp] configure command "do"


On Mon, 29 Jul 2002 16:23:04 +0200 Stefan Reelsen <stefan@reelsen.net>
wrote:
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> when enterering "do ?". Does anybody know what this means?

I don't believe there is any such command. "do" is probably shorthand
for some other command - see what typing "do?" (Without the space)
gives.

--
Ryan O'Connell - CCIE #8174
<ryan@complicity.co.uk> - http://www.complicity.co.uk

I'm not losing my mind, no I'm not changing my lines,
I'm just learning new things with the passage of time

_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

------------------------------------------------------------------------------
Live Life in Broadband
www.telewest.co.uk


The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.
Statements and opinions expressed in this e-mail may not represent those of the company. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.


==============================================================================

CSCdt34032 - run exec commands inside configuration mode.

This new CLI allows users to execute EXEC commands from inside
configuration mode.

Syntax description :

do - Keyword used to execute the EXEC command in config mode
WORD - The EXEC command to be executed


Integrated in:

12.1(10.05)EC
12.1(10.05)E
12.2(06.04)B
12.2(06.04)PB
12.0(19.06)SP
12.0(19.06)ST
12.0(19.05)S
12.2(05.02)PI
12.2(05.02)T


> -----Original Message-----
> From: cisco-nsp-admin@puck.nether.net
> [mailto:cisco-nsp-admin@puck.nether.net]On Behalf Of Everett Dowd
> Sent: Saturday, August 03, 2002 2:45 AM
> To: Ryan O'Connell; Stefan Reelsen; cisco-nsp@puck.nether.net
> Subject: RE: [nsp] configure command "do"
>
>
> Looks like it is only in the T train.... It appears to be a new
> feature and
> maybe it will be incorporated into future mainline releases...
> Nice feature
> if you need to see a CLI response like sh int..
>
> Everett
>
>
>
>
> -----Original Message-----
> From: cisco-nsp-admin@puck.nether.net
> [mailto:cisco-nsp-admin@puck.nether.net]On Behalf Of Ryan O'Connell
> Sent: Friday, August 02, 2002 4:10 AM
> To: Stefan Reelsen; cisco-nsp@puck.nether.net
> Subject: Re: [nsp] configure command "do"
>
> On Mon, 29 Jul 2002 16:23:04 +0200 Stefan Reelsen <stefan@reelsen.net>
> wrote:
> > somebody told me it would be possible to show the running-config out
> > of the configuration mode with the command "do show run". With IOS
> > 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> > when enterering "do ?".
> > Does anybody know what this means?
>
> I don't believe there is any such command. "do" is probably shorthand for
> some other command - see what typing "do?" (Without the space) gives.
>
> --
> Ryan O'Connell - CCIE #8174
> <ryan@complicity.co.uk> - http://www.complicity.co.uk
>
> I'm not losing my mind, no I'm not changing my lines,
> I'm just learning new things with the passage of time
>
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

Be nice if it <TAB> completed as well...


Matt.

-----Original Message-----
From: Barry Raveendran Greene [mailto:bgreene@cisco.com]
Sent: 05 August 2002 11:19
To: Everett Dowd; Ryan O'Connell; Stefan Reelsen;
cisco-nsp@puck.nether.net
Subject: RE: [nsp] configure command "do"




CSCdt34032 - run exec commands inside configuration mode.

This new CLI allows users to execute EXEC commands from inside
configuration mode.

Syntax description :

do - Keyword used to execute the EXEC command in config mode
WORD - The EXEC command to be executed


Integrated in:

12.1(10.05)EC
12.1(10.05)E
12.2(06.04)B
12.2(06.04)PB
12.0(19.06)SP
12.0(19.06)ST
12.0(19.05)S
12.2(05.02)PI
12.2(05.02)T


> -----Original Message-----
> From: cisco-nsp-admin@puck.nether.net
> [mailto:cisco-nsp-admin@puck.nether.net]On Behalf Of Everett Dowd
> Sent: Saturday, August 03, 2002 2:45 AM
> To: Ryan O'Connell; Stefan Reelsen; cisco-nsp@puck.nether.net
> Subject: RE: [nsp] configure command "do"
>
>
> Looks like it is only in the T train.... It appears to be a new
> feature and
> maybe it will be incorporated into future mainline releases...
> Nice feature
> if you need to see a CLI response like sh int..
>
> Everett
>
>
>
>
> -----Original Message-----
> From: cisco-nsp-admin@puck.nether.net
> [mailto:cisco-nsp-admin@puck.nether.net]On Behalf Of Ryan O'Connell
> Sent: Friday, August 02, 2002 4:10 AM
> To: Stefan Reelsen; cisco-nsp@puck.nether.net
> Subject: Re: [nsp] configure command "do"
>
> On Mon, 29 Jul 2002 16:23:04 +0200 Stefan Reelsen <stefan@reelsen.net>
> wrote:
> > somebody told me it would be possible to show the running-config out
> > of the configuration mode with the command "do show run". With IOS
> > 12.2.10b the system asks for <0-999999>.<0-999999> Version number
> > when enterering "do ?".
> > Does anybody know what this means?
>
> I don't believe there is any such command. "do" is probably shorthand for
> some other command - see what typing "do?" (Without the space) gives.
>
> --
> Ryan O'Connell - CCIE #8174
> <ryan@complicity.co.uk> - http://www.complicity.co.uk
>
> I'm not losing my mind, no I'm not changing my lines,
> I'm just learning new things with the passage of time
>
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

------------------------------------------------------------------------------
Live Life in Broadband
www.telewest.co.uk


The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.
Statements and opinions expressed in this e-mail may not represent those of the company. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.


==============================================================================