Mailing List Archive

You are using a T release and that is not really recommended unless
you have to, but I don't think this issue is related to that. I am
not experienced with this error message at all, but I would recommend
you verify you do not have any messed up commands in your config.
Specifically I would say look at your modemcap and the line configs.

Sorry if this is not very specific, I hope this was enough help to
get you in the right direction.

-- James


At 4:09 PM +0300 4/23/03, Tassos Chatzithomaoglou wrote:
>IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(13)T3, RELEASE
>SOFTWARE (fc2)
>
>dial-ath-25#wr mem
>Building configuration...
>This command has no effect on this line; use modem AT commands
>instead <---------
>[OK]
>
>
>Is this supposed to be a bug?
>
>--
>***********************************
> Chatzithomaoglou Anastasios
>Network Design & Operations Center
> FORTHnet S.A.
> <achatz@forthnet.gr>
>***********************************
>
>_______________________________________________
>cisco-nas mailing list
>cisco-nas@puck.nether.net
>http://puck.nether.net/mailman/listinfo/cisco-nas

--
James
Tomorrow will be cancelled due to lack of interest. - Anonymous
"Trying is the first step towards failure." - Homer Simpson

This is CSCdz17325, fixed in 12.2(13.4)T (hence in 12.2(15)T.)
This is purely cosmetic, and I would not consider it to be a good
reason to change IOS.

Aaron

---

> You are using a T release and that is not really recommended unless
> you have to, but I don't think this issue is related to that. I am
> not experienced with this error message at all, but I would recommend
> you verify you do not have any messed up commands in your config.
> Specifically I would say look at your modemcap and the line configs.

> Sorry if this is not very specific, I hope this was enough help to
> get you in the right direction.

> -- James


> At 4:09 PM +0300 4/23/03, Tassos Chatzithomaoglou wrote:
> >IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(13)T3, RELEASE
> >SOFTWARE (fc2)
> >
> >dial-ath-25#wr mem
> >Building configuration...
> >This command has no effect on this line; use modem AT commands
> >instead <---------
> >[OK]
> >
> >
> >Is this supposed to be a bug?
> >
> >--
> >***********************************
> > Chatzithomaoglou Anastasios
> >Network Design & Operations Center
> > FORTHnet S.A.
> > <achatz@forthnet.gr>
> >***********************************
> >
> >_______________________________________________
> >cisco-nas mailing list
> >cisco-nas@puck.nether.net
> >http://puck.nether.net/mailman/listinfo/cisco-nas

> --
> James
> Tomorrow will be cancelled due to lack of interest. - Anonymous
> "Trying is the first step towards failure." - Homer Simpson
> _______________________________________________
> cisco-nas mailing list
> cisco-nas@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

Yes it is a bug...CSCdz17325. Fixed in 12.2(13.4)T and later.

Dennis

Tassos Chatzithomaoglou [achatz@forthnet.gr] wrote:
> IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(13)T3, RELEASE SOFTWARE
> (fc2)
>
> dial-ath-25#wr mem
> Building configuration...
> This command has no effect on this line; use modem AT commands instead
> <---------
> [OK]
>
>
> Is this supposed to be a bug?
>
> --
> ***********************************
> Chatzithomaoglou Anastasios
> Network Design & Operations Center
> FORTHnet S.A.
> <achatz@forthnet.gr>
> ***********************************
>
> _______________________________________________
> cisco-nas mailing list
> cisco-nas@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

--
-------------------------------------------------------------------------
|| || Dennis Peng
|| || Cisco Systems, Inc. Escalation Engineer
|||| |||| 170 West Tasman Drive Phone: (408) 526-6143
..:||||||:..:||||||:.. San Jose, CA 95134 Fax: (408) 232-2343
Cisco Systems Inc. dpeng@cisco.com
-------------------------------------------------------------------------