Dear All,
I have one Cisco gear (7204-VXR NPE-300)used to terminate around 1500 PPPOA
and PPPOE ADSL customers, but Decide to replace it by Cisco7206-VXR NPE-G1
for more bandwidth and sessions, but we faced a very weird behavior, the
customers login and authenticated with the Radius but they assigned the same
IP address!!!!! and there is nothing wrong appears on the Radius log, so any
advice??
Note: i had change the IOS to different releases
12.3-8-T11
12.3-22
12.4-T10
G1#sh users
Line User Host(s) Idle Location
* 0 con 0 admin idle 00:00:00
Interface User Mode Idle Peer Address
Vi4 test3 PPPoE 00:07:40 x.x.x.102
Vi5 test2 PPPoE 00:07:39 x.x.x.173
Vi6 test1 PPPoE 00:07:36 x.x.x.102
--
Best Reagrds,
Mounir Mohamed
I have one Cisco gear (7204-VXR NPE-300)used to terminate around 1500 PPPOA
and PPPOE ADSL customers, but Decide to replace it by Cisco7206-VXR NPE-G1
for more bandwidth and sessions, but we faced a very weird behavior, the
customers login and authenticated with the Radius but they assigned the same
IP address!!!!! and there is nothing wrong appears on the Radius log, so any
advice??
Note: i had change the IOS to different releases
12.3-8-T11
12.3-22
12.4-T10
G1#sh users
Line User Host(s) Idle Location
* 0 con 0 admin idle 00:00:00
Interface User Mode Idle Peer Address
Vi4 test3 PPPoE 00:07:40 x.x.x.102
Vi5 test2 PPPoE 00:07:39 x.x.x.173
Vi6 test1 PPPoE 00:07:36 x.x.x.102
--
Best Reagrds,
Mounir Mohamed