Joseph,
One way you can do this is to put a translation rule on the incoming
dialpeer to add 999# to the number and then use this to match a specific
outbound dialpeer (then strip it off).
You route based on MODIFIED destination pattern.
Incoming call on trunk 7 is 5088881111
Modify call with translation rule to 9999#508888111
Have destination dialpeer as
Destination pattern 9999#.T
Darryl Sladden
dsladden@cisco.com
Technical Marketing Manager, SRTG
CUBE, CME, UCS Express, SRST, Voice Gateways
http://www.ciscopress.com/bookstore/product.asp?isbn=1587059444 SIP Trunking - By Darryl Sladden
-----Original Message-----
From: cisco-nas-bounces@puck.nether.net
[mailto:cisco-nas-bounces@puck.nether.net] On Behalf Of Joseph Mays
Sent: Thursday, May 17, 2012 10:09 AM
To: cisco-nas@puck.nether.net
Subject: [cisco-nas] Dial-peer matching on caller id or incomng trunk
group
I want to route all calls coming from a specific trunk to another
specific trunk group. Is there any way, in a dial-peer entry, to match
on caller ID or incoming trunk group, rather than destination-pattern?
_______________________________________________
cisco-nas mailing list
cisco-nas@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nas _______________________________________________
cisco-nas mailing list
cisco-nas@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nas