Mailing List Archive

On Thu, Jun 30, 2022 at 4:28 PM jnilles@jala.com <jnilles@jala.com> wrote:
>
> I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL to work on two hosts with the same IP address. My vhosts.config is set for the two hosts but only one actually runs. When I run systemctl status apache2.service I get a message that NameVirtualHost has no effect and will be removed. So the configuration only works if I have just one host.

That directive has no effect, it's not the cause of any issue.

> What key detail am I missing in the network configuration?

What are your Listen directives?
What do your virtualHosts look like?
What test requests do you send and how do they fail?

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

You are missing something called virtual hosts. You are allowed one host but
you can have many virtual hosts. Secondly, you should be using Leap 15.4, it
sounds like you are out of date, sorry to say.



If you go to your httpd.conf file then you will notice that there is a
enable virtual hosts #include virtual hosts.conf httpd-vhosts.conf so
uncomment it remove the #



De : jnilles@jala.com <jnilles@jala.com>
Envoy? : jeudi 30 juin 2022 16:28
? : users@httpd.apache.org
Objet : [users@httpd] NameVirtualHost fails



I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL to work on two
hosts with the same IP address. My vhosts.config is set for the two hosts
but only one actually runs. When I run systemctl status apache2.service I
get a message that NameVirtualHost has no effect and will be removed. So the
configuration only works if I have just one host.



What key detail am I missing in the network configuration?



Thanks,



Jack Nilles

That is one assumption, sure. Best to have the user run apachectl -S to
confirm. For all we know, they could have defined invalid vhosts.

On Thu, 30 Jun 2022 at 16:54, <freebsd@videotron.eu> wrote:

> You are missing something called virtual hosts. You are allowed one host
> but you can have many virtual hosts. Secondly, you should be using Leap
> 15.4, it sounds like you are out of date, sorry to say.
>
>
>
> If you go to your httpd.conf file then you will notice that there is a
> enable virtual hosts #include virtual hosts.conf httpd-vhosts.conf so
> uncomment it remove the #
>
>
>
> *De :* jnilles@jala.com <jnilles@jala.com>
> *Envoyé :* jeudi 30 juin 2022 16:28
> *À :* users@httpd.apache.org
> *Objet :* [users@httpd] NameVirtualHost fails
>
>
>
> I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL to work on
> two hosts with the same IP address. My vhosts.config is set for the two
> hosts but only one actually runs. When I run systemctl status
> apache2.service I get a message that NameVirtualHost has no effect and
> will be removed. So the configuration only works if I have just one host.
>
>
>
> What key detail am I missing in the network configuration?
>
>
>
> Thanks,
>
>
>
> Jack Nilles
>
>
>

Here's an example version of my vhosts.conf file:

# http redirect
<VirtualHost *:80>
ServerName central.com
ServerAlias www.example1.com *.example1.com
Redirect / https://www.example1.com/
ErrorLog /var/log/apache2/example1.com-error80_log
CustomLog /var/log/apache2/example1.com-access80_log combined
</VirtualHost>

<Virtualhost *:80>
ServerName example2.com
ServerAlias www.example2.com *.example2.com
Redirect / https://www.example2.com/
ErrorLog /var/log/apache2/example2.com-error80_log
CustomLog /var/log/apache2/example2.com-access80_log combined
</VirtualHost>

# https version
<VirtualHost *:443>
ServerAdmin webmaster@central.com
ServerName example1.com
ServerAlias www.example1.com *.example1.com
DocumentRoot "/home/data/hqwww/htdocs"
SSLEngine on
SSLProtocol all -SSLv2
SSLCertificateFile /etc/apache2/ssl.crt/example.crt
SSLCertificateKeyFile /etc/apache2/ssl.key/www.example1.com.key
SSLCertificateChainFile /etc/apache2/ssl.crt/example1.ca-bundle
RewriteEngine On
RewriteOptions Inherit


<Directory "/home/data/example1/htdocs">
AllowOverride None
Options FollowSymlinks
Require all granted
</Directory>


AccessFileName .htaccess

ErrorLog /var/log/apache2/example1.com-error_log
CustomLog /var/log/apache2/example1.com-access_log combined


Include /etc/apache2/conf.d/*.conf
</VirtualHost>


<VirtualHost *:443>
ServerAdmin webmaster@central.com
ServerName example2.com
ServerAlias www.example2.com *.example2.com
DocumentRoot "/home/data/jmnwww/htdocs"
SSLEngine on
SSLProtocol all -SSLv2
SSLCertificateFile /etc/apache2/ssl.crt/example2.crt
SSLCertificateKeyFile /etc/apache2/ssl.key/www.example2.com.key
SSLCertificateChainFile /etc/apache2/ssl.crt/example2.ca-bundle
RewriteEngine On
RewriteOptions Inherit

<Directory "/home/data/example2/htdocs">
## To make the site work with pretty permalinks use the next 2 uncommented lines.
## Otherwise use 'Options None' and 'AllowOverride None'
AllowOverride all
Options FollowSymlinks
Require all granted
</Directory>

AccessFileName .htaccess

ErrorLog /var/log/apache2/example2.com-error_log
CustomLog /var/log/apache2/example2.com-access_log combined

Include /etc/apache2/conf.d/*.conf
</VirtualHost>

If I drop the second host (example2), leaving just example1 it works; with both hosts apache crashes on restart. Here is the failure message output for that case.

systemctl status apache2.service
? apache2.service - The Apache Webserver
Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Fri 2022-07-01 14:12:39 PDT; 6min ago
Process: 29193 ExecStart=/usr/sbin/start_apache2 -DSYSTEMD -DFOREGROUND -k start (code=exited, status=1/>
Main PID: 29193 (code=exited, status=1/FAILURE)
Status: "Reading configuration..."

Jul 01 14:12:39 donner systemd[1]: Starting The Apache Webserver...
Jul 01 14:12:39 donner start_apache2[29193]: AH00548: NameVirtualHost has no effect and will be removed in t>
Jul 01 14:12:39 donner systemd[1]: apache2.service: Main process exited, code=exited, status=1/FAILURE
Jul 01 14:12:39 donner systemd[1]: apache2.service: Failed with result 'exit-code'.
Jul 01 14:12:39 donner systemd[1]: Failed to start The Apache Webserver.


> On 30 Jun 2022, at 16:24, Frank Gingras <thumbs@apache.org> wrote:
>
> That is one assumption, sure. Best to have the user run apachectl -S to confirm. For all we know, they could have defined invalid vhosts.
>
> On Thu, 30 Jun 2022 at 16:54, <freebsd@videotron.eu <mailto:freebsd@videotron.eu>> wrote:
> You are missing something called virtual hosts. You are allowed one host but you can have many virtual hosts. Secondly, you should be using Leap 15.4, it sounds like you are out of date, sorry to say.
>
>
>
> If you go to your httpd.conf file then you will notice that there is a enable virtual hosts #include virtual hosts.conf httpd-vhosts.conf so uncomment it remove the #
>
>
>
> De : jnilles@jala.com <mailto:jnilles@jala.com> <jnilles@jala.com <mailto:jnilles@jala.com>>
> Envoyé : jeudi 30 juin 2022 16:28
> À : users@httpd.apache.org <mailto:users@httpd.apache.org>
> Objet : [users@httpd] NameVirtualHost fails
>
>
>
> I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL to work on two hosts with the same IP address. My vhosts.config is set for the two hosts but only one actually runs. When I run systemctl status apache2.service I get a message that NameVirtualHost has no effect and will be removed. So the configuration only works if I have just one host.
>
>
>
> What key detail am I missing in the network configuration?
>
>
>
> Thanks,
>
>
>
> Jack Nilles
>
>
>

What does the error log say, exactly? Note that TLS failures can be almost
silent in the logs, so if a single vhost causes the startup error, then
check the certificate.

On Fri, 1 Jul 2022 at 17:24, jnilles@jala.com <jnilles@jala.com> wrote:

> Here's an example version of my vhosts.conf file:
>
> # http redirect
> <VirtualHost *:80>
> ServerName central.com
> ServerAlias www.example1.com *.example1.com
> Redirect / https://www.example1.com/
> ErrorLog /var/log/apache2/example1.com-error80_log
> CustomLog /var/log/apache2/example1.com-access80_log combined
> </VirtualHost>
>
> <Virtualhost *:80>
> ServerName example2.com
> ServerAlias www.example2.com *.example2.com
> Redirect / https://www.example2.com/
> ErrorLog /var/log/apache2/example2.com-error80_log
> CustomLog /var/log/apache2/example2.com-access80_log combined
> </VirtualHost>
>
> # https version
> <VirtualHost *:443>
> ServerAdmin webmaster@central.com
> ServerName example1.com
> ServerAlias www.example1.com *.example1.com
> DocumentRoot "/home/data/hqwww/htdocs"
> SSLEngine on
> SSLProtocol all -SSLv2
> SSLCertificateFile /etc/apache2/ssl.crt/example.crt
> SSLCertificateKeyFile /etc/apache2/ssl.key/www.example1.com.key
> SSLCertificateChainFile /etc/apache2/ssl.crt/example1.ca-bundle
> RewriteEngine On
> RewriteOptions Inherit
>
>
> <Directory "/home/data/example1/htdocs">
> AllowOverride None
> Options FollowSymlinks
> Require all granted
> </Directory>
>
>
> AccessFileName .htaccess
>
> ErrorLog /var/log/apache2/example1.com-error_log
> CustomLog /var/log/apache2/example1.com-access_log combined
>
>
> Include /etc/apache2/conf.d/*.conf
> </VirtualHost>
>
>
> <VirtualHost *:443>
> ServerAdmin webmaster@central.com
> ServerName example2.com
> ServerAlias www.example2.com *.example2.com
> DocumentRoot "/home/data/jmnwww/htdocs"
> SSLEngine on
> SSLProtocol all -SSLv2
> SSLCertificateFile /etc/apache2/ssl.crt/example2.crt
> SSLCertificateKeyFile /etc/apache2/ssl.key/www.example2.com.key
> SSLCertificateChainFile /etc/apache2/ssl.crt/example2.ca-bundle
> RewriteEngine On
> RewriteOptions Inherit
>
> <Directory "/home/data/example2/htdocs">
> ## To make the site work with pretty permalinks use the next 2
> uncommented lines.
> ## Otherwise use 'Options None' and 'AllowOverride None'
> AllowOverride all
> Options FollowSymlinks
> Require all granted
> </Directory>
>
> AccessFileName .htaccess
>
> ErrorLog /var/log/apache2/example2.com-error_log
> CustomLog /var/log/apache2/example2.com-access_log combined
>
> Include /etc/apache2/conf.d/*.conf
> </VirtualHost>
>
> If I drop the second host (example2), leaving just example1 it works; with
> both hosts apache crashes on restart. Here is the failure message output
> for that case.
>
> systemctl status apache2.service
> *?* apache2.service - The Apache Webserver
> Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled;
> vendor preset: disabled)
> Active: *failed* (Result: exit-code) since Fri 2022-07-01 14:12:39
> PDT; 6min ago
> Process: 29193 ExecStart=/usr/sbin/start_apache2 -DSYSTEMD
> -DFOREGROUND -k start *(code=exited, status=1/*>
> Main PID: 29193 (code=exited, status=1/FAILURE)
> Status: "Reading configuration..."
>
> Jul 01 14:12:39 donner systemd[1]: Starting The Apache Webserver...
> Jul 01 14:12:39 donner start_apache2[29193]: AH00548: NameVirtualHost has
> no effect and will be removed in t>
> Jul 01 14:12:39 donner systemd[1]: *apache2.service: Main process exited,
> code=exited, status=1/FAILURE*
> Jul 01 14:12:39 donner systemd[1]: *apache2.service: Failed with result
> 'exit-code'.*
> Jul 01 14:12:39 donner systemd[1]: *Failed to start The Apache Webserver.*
>
>
> On 30 Jun 2022, at 16:24, Frank Gingras <thumbs@apache.org> wrote:
>
> That is one assumption, sure. Best to have the user run apachectl -S to
> confirm. For all we know, they could have defined invalid vhosts.
>
> On Thu, 30 Jun 2022 at 16:54, <freebsd@videotron.eu> wrote:
>
>> You are missing something called virtual hosts. You are allowed one host
>> but you can have many virtual hosts. Secondly, you should be using Leap
>> 15.4, it sounds like you are out of date, sorry to say.
>>
>>
>>
>> If you go to your httpd.conf file then you will notice that there is a
>> enable virtual hosts #include virtual hosts.conf httpd-vhosts.conf so
>> uncomment it remove the #
>>
>>
>>
>> *De :* jnilles@jala.com <jnilles@jala.com>
>> *Envoyé :* jeudi 30 juin 2022 16:28
>> *À :* users@httpd.apache.org
>> *Objet :* [users@httpd] NameVirtualHost fails
>>
>>
>>
>> I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL to work on
>> two hosts with the same IP address. My vhosts.config is set for the two
>> hosts but only one actually runs. When I run systemctl status
>> apache2.service I get a message that NameVirtualHost has no effect and
>> will be removed. So the configuration only works if I have just one host.
>>
>>
>>
>> What key detail am I missing in the network configuration?
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Jack Nilles
>>
>>
>>
>
>

I've tried several variations but basically the error message is that the certificate and the key for example2.com <http://example2.com/> don't match. I thought I had set up the certificate with the proper keys so something must be screwed up with the certificate. I'm working on that.

Jack

> On 2 Jul 2022, at 1:21, Frank Gingras <thumbs@apache.org> wrote:
>
> What does the error log say, exactly? Note that TLS failures can be almost silent in the logs, so if a single vhost causes the startup error, then check the certificate.
>
> On Fri, 1 Jul 2022 at 17:24, jnilles@jala.com <mailto:jnilles@jala.com> <jnilles@jala.com <mailto:jnilles@jala.com>> wrote:
> Here's an example version of my vhosts.conf file:
>
> # http redirect
> <VirtualHost *:80>
> ServerName central.com <http://central.com/>
> ServerAlias www.example1.com <http://www.example1.com/> *.example1.com <http://example1.com/>
> Redirect / https://www.example1.com/ <https://www.example1.com/>
> ErrorLog /var/log/apache2/example1.com <http://example1.com/>-error80_log
> CustomLog /var/log/apache2/example1.com <http://example1.com/>-access80_log combined
> </VirtualHost>
>
> <Virtualhost *:80>
> ServerName example2.com <http://example2.com/>
> ServerAlias www.example2.com <http://www.example2.com/> *.example2.com <http://example2.com/>
> Redirect / https://www.example2.com/ <https://www.example2.com/>
> ErrorLog /var/log/apache2/example2.com <http://example2.com/>-error80_log
> CustomLog /var/log/apache2/example2.com <http://example2.com/>-access80_log combined
> </VirtualHost>
>
> # https version
> <VirtualHost *:443>
> ServerAdmin webmaster@central.com <mailto:webmaster@central.com>
> ServerName example1.com <http://example1.com/>
> ServerAlias www.example1.com <http://www.example1.com/> *.example1.com <http://example1.com/>
> DocumentRoot "/home/data/hqwww/htdocs"
> SSLEngine on
> SSLProtocol all -SSLv2
> SSLCertificateFile /etc/apache2/ssl.crt/example.crt
> SSLCertificateKeyFile /etc/apache2/ssl.key/www.example1.com.key <http://www.example1.com.key/>
> SSLCertificateChainFile /etc/apache2/ssl.crt/example1.ca <http://example1.ca/>-bundle
> RewriteEngine On
> RewriteOptions Inherit
>
>
> <Directory "/home/data/example1/htdocs">
> AllowOverride None
> Options FollowSymlinks
> Require all granted
> </Directory>
>
>
> AccessFileName .htaccess
>
> ErrorLog /var/log/apache2/example1.com <http://example1.com/>-error_log
> CustomLog /var/log/apache2/example1.com <http://example1.com/>-access_log combined
>
>
> Include /etc/apache2/conf.d/*.conf
> </VirtualHost>
>
>
> <VirtualHost *:443>
> ServerAdmin webmaster@central.com <mailto:webmaster@central.com>
> ServerName example2.com <http://example2.com/>
> ServerAlias www.example2.com <http://www.example2.com/> *.example2.com <http://example2.com/>
> DocumentRoot "/home/data/jmnwww/htdocs"
> SSLEngine on
> SSLProtocol all -SSLv2
> SSLCertificateFile /etc/apache2/ssl.crt/example2.crt
> SSLCertificateKeyFile /etc/apache2/ssl.key/www.example2.com.key <http://www.example2.com.key/>
> SSLCertificateChainFile /etc/apache2/ssl.crt/example2.ca <http://example2.ca/>-bundle
> RewriteEngine On
> RewriteOptions Inherit
>
> <Directory "/home/data/example2/htdocs">
> ## To make the site work with pretty permalinks use the next 2 uncommented lines.
> ## Otherwise use 'Options None' and 'AllowOverride None'
> AllowOverride all
> Options FollowSymlinks
> Require all granted
> </Directory>
>
> AccessFileName .htaccess
>
> ErrorLog /var/log/apache2/example2.com <http://example2.com/>-error_log
> CustomLog /var/log/apache2/example2.com <http://example2.com/>-access_log combined
>
> Include /etc/apache2/conf.d/*.conf
> </VirtualHost>
>
> If I drop the second host (example2), leaving just example1 it works; with both hosts apache crashes on restart. Here is the failure message output for that case.
>
> systemctl status apache2.service
> ? apache2.service - The Apache Webserver
> Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled; vendor preset: disabled)
> Active: failed (Result: exit-code) since Fri 2022-07-01 14:12:39 PDT; 6min ago
> Process: 29193 ExecStart=/usr/sbin/start_apache2 -DSYSTEMD -DFOREGROUND -k start (code=exited, status=1/>
> Main PID: 29193 (code=exited, status=1/FAILURE)
> Status: "Reading configuration..."
>
> Jul 01 14:12:39 donner systemd[1]: Starting The Apache Webserver...
> Jul 01 14:12:39 donner start_apache2[29193]: AH00548: NameVirtualHost has no effect and will be removed in t>
> Jul 01 14:12:39 donner systemd[1]: apache2.service: Main process exited, code=exited, status=1/FAILURE
> Jul 01 14:12:39 donner systemd[1]: apache2.service: Failed with result 'exit-code'.
> Jul 01 14:12:39 donner systemd[1]: Failed to start The Apache Webserver.
>
>
>> On 30 Jun 2022, at 16:24, Frank Gingras <thumbs@apache.org <mailto:thumbs@apache.org>> wrote:
>>
>> That is one assumption, sure. Best to have the user run apachectl -S to confirm. For all we know, they could have defined invalid vhosts.
>>
>> On Thu, 30 Jun 2022 at 16:54, <freebsd@videotron.eu <mailto:freebsd@videotron.eu>> wrote:
>> You are missing something called virtual hosts. You are allowed one host but you can have many virtual hosts. Secondly, you should be using Leap 15.4, it sounds like you are out of date, sorry to say.
>>
>>
>>
>> If you go to your httpd.conf file then you will notice that there is a enable virtual hosts #include virtual hosts.conf httpd-vhosts.conf so uncomment it remove the #
>>
>>
>>
>> De : jnilles@jala.com <mailto:jnilles@jala.com> <jnilles@jala.com <mailto:jnilles@jala.com>>
>> Envoyé : jeudi 30 juin 2022 16:28
>> À : users@httpd.apache.org <mailto:users@httpd.apache.org>
>> Objet : [users@httpd] NameVirtualHost fails
>>
>>
>>
>> I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL to work on two hosts with the same IP address. My vhosts.config is set for the two hosts but only one actually runs. When I run systemctl status apache2.service I get a message that NameVirtualHost has no effect and will be removed. So the configuration only works if I have just one host.
>>
>>
>>
>> What key detail am I missing in the network configuration?
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Jack Nilles
>>
>>
>>
>

this is how my ssl, vhosts, redirects are setup maybe this will help

note any ssl website name MUST equal a valid certificate or you will get
a cert mismatch error !!

granted there are several cert authorities (free ssl etc) i have found
its just easier to get a resale account (lots of providers opensrs,
certigo, thwarte etc etc) and pay the 10.00 per cert.

cert would be ok for www.xxx.com xnd xxx.com (aka you typically only
need one certificate per site.)

not pushing any provider, just saying letsencrypt etc does not always
work reliabily or speed issues....



<VirtualHost *:80>
ServerName bedrockconstruction.ca
ServerAlias bedrockconstruction.ca
ServerAlias www.bedrockconstruction.ca
Redirect permanent / https://bedrockconstruction.ca/
</VirtualHost>

<VirtualHost *:443>
ServerName bedrockconstruction.ca
ServerAlias bedrockconstruction.ca
ServerAlias www.bedrockconstruction.ca
DocumentRoot /www/bedrockconstruction.ca

SSLEngine on
SSLProtocol all
SSLCertificateFile
/www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.crt
SSLCertificateKeyFile
/www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.key
SSLCertificateChainFile
/www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.chain


SuexecUserGroup www www

<Directory "/www/bedrockconstruction.ca/wp-content/uploads/">
<Files "*.php">
Order Deny,Allow
Deny from All
</Files>
</Directory>

<Directory /www/bedrockconstruction.ca>
php_admin_value open_basedir /www/bedrockconstruction.ca:/var/log/
</Directory>

<Directory /www/bedrockconstruction.ca>
php_admin_value sys_temp_dir /www/bedrockconstruction.ca/tmp/
</Directory>

<Directory /www/bedrockconstruction.ca>
php_admin_value session.save_path /www/bedrockconstruction.ca/tmp/
</Directory>

<Directory /www/bedrockconstruction.ca>
php_admin_value soap.wsdl_cache_dir /www/bedrockconstruction.ca/tmp/
</Directory>

<Directory /www/bedrockconstruction.ca>
php_admin_value upload_tmp_dir /www/bedrockconstruction.ca/tmp
</Directory>

<Directory "/www/bedrockconstruction.ca">
AllowOverride All
php_value session.save_path "/www/bedrockconstruction.ca/"
</Directory>

</VirtualHost>



Happy Wednesday !!!
Thanks - paul

Paul Kudla


Scom.ca Internet Services <http://www.scom.ca>
004-1009 Byron Street South
Whitby, Ontario - Canada
L1N 4S3

Toronto 416.642.7266
Main 1.866.411.7266
Fax 1.888.892.7266
Email paul@scom.ca

On 7/5/2022 5:38 PM, scom.ca@httpd.apache.org wrote:
> I've tried several variations but basically the error message is that
> the certificate and the key for example2.com
> <http://example2.com/> don't match. I thought I had set up the
> certificate with the proper keys so something must be screwed up  with
> the certificate. I'm working on that.
>
> Jack
>
>> On 2 Jul 2022, at 1:21, Frank Gingras <thumbs@apache.org
>> <mailto:thumbs@apache.org>> wrote:
>>
>> What does the error log say, exactly? Note that TLS failures can be
>> almost silent in the logs, so if a single vhost causes the startup
>> error, then check the certificate.
>>
>> On Fri, 1 Jul 2022 at 17:24, jnilles@jala.com
>> <mailto:jnilles@jala.com> <jnilles@jala.com <mailto:jnilles@jala.com>>
>> wrote:
>>
>> Here's an example version of my vhosts.conf file:
>>
>> # http redirect
>> <VirtualHost *:80>
>>  ServerName central.com <http://central.com/>
>>  ServerAlias www.example1.com <http://www.example1.com/>
>> *.example1.com <http://example1.com/>
>>  Redirect / https://www.example1.com/ <https://www.example1.com/>
>>  ErrorLog /var/log/apache2/example1.com
>> <http://example1.com/>-error80_log
>>  CustomLog /var/log/apache2/example1.com
>> <http://example1.com/>-access80_log combined
>> </VirtualHost>
>>
>> <Virtualhost *:80>
>>  ServerName example2.com <http://example2.com/>
>>  ServerAlias www.example2.com <http://www.example2.com/>
>> *.example2.com <http://example2.com/>
>>  Redirect / https://www.example2.com/ <https://www.example2.com/>
>>  ErrorLog /var/log/apache2/example2.com
>> <http://example2.com/>-error80_log
>>  CustomLog /var/log/apache2/example2.com
>> <http://example2.com/>-access80_log combined
>> </VirtualHost>
>>
>> # https version
>> <VirtualHost *:443>
>>  ServerAdmin webmaster@central.com <mailto:webmaster@central.com>
>>  ServerName example1.com <http://example1.com/>
>>  ServerAlias www.example1.com <http://www.example1.com/>
>> *.example1.com <http://example1.com/>
>>  DocumentRoot "/home/data/hqwww/htdocs"
>>  SSLEngine on
>>  SSLProtocol all -SSLv2
>>  SSLCertificateFile /etc/apache2/ssl.crt/example.crt
>>  SSLCertificateKeyFile /etc/apache2/ssl.key/www.example1.com.key
>> <http://www.example1.com.key/>
>>  SSLCertificateChainFile /etc/apache2/ssl.crt/example1.ca
>> <http://example1.ca/>-bundle
>>  RewriteEngine On
>>  RewriteOptions Inherit
>>
>>
>>  <Directory "/home/data/example1/htdocs">
>>   AllowOverride None
>>   Options FollowSymlinks
>>   Require all granted
>>  </Directory>
>>
>>
>>   AccessFileName .htaccess
>>
>>  ErrorLog /var/log/apache2/example1.com
>> <http://example1.com/>-error_log
>>  CustomLog /var/log/apache2/example1.com
>> <http://example1.com/>-access_log combined
>>
>>
>>   Include /etc/apache2/conf.d/*.conf
>> </VirtualHost>
>>
>>
>> <VirtualHost *:443>
>>   ServerAdmin webmaster@central.com <mailto:webmaster@central.com>
>>   ServerName example2.com <http://example2.com/>
>>   ServerAlias www.example2.com <http://www.example2.com/>
>> *.example2.com <http://example2.com/>
>>   DocumentRoot "/home/data/jmnwww/htdocs"
>>   SSLEngine on
>>   SSLProtocol all -SSLv2
>>   SSLCertificateFile /etc/apache2/ssl.crt/example2.crt
>>   SSLCertificateKeyFile /etc/apache2/ssl.key/www.example2.com.key
>> <http://www.example2.com.key/>
>>   SSLCertificateChainFile /etc/apache2/ssl.crt/example2.ca
>> <http://example2.ca/>-bundle
>>   RewriteEngine On
>>   RewriteOptions Inherit
>>
>>  <Directory "/home/data/example2/htdocs">
>> ##  To make the site work with pretty permalinks use the next 2
>> uncommented lines.
>> ##  Otherwise use 'Options None' and 'AllowOverride None'
>>   AllowOverride all
>>   Options FollowSymlinks
>>   Require all granted
>>  </Directory>
>>
>>   AccessFileName .htaccess
>>
>>  ErrorLog /var/log/apache2/example2.com
>> <http://example2.com/>-error_log
>>  CustomLog /var/log/apache2/example2.com
>> <http://example2.com/>-access_log combined
>>
>>     Include /etc/apache2/conf.d/*.conf
>> </VirtualHost>
>>
>> If I drop the second host (example2), leaving just example1 it
>> works; with both hosts apache crashes on restart. Here is  the
>> failure message output for that case.
>>
>>  systemctl status apache2.service
>> *?*apache2.service - The Apache Webserver
>>      Loaded: loaded (/usr/lib/systemd/system/apache2.service;
>> enabled; vendor preset: disabled)
>>      Active: *failed*(Result: exit-code) since Fri 2022-07-01
>> 14:12:39 PDT; 6min ago
>>     Process: 29193 ExecStart=/usr/sbin/start_apache2 -DSYSTEMD
>> -DFOREGROUND -k start *(code=exited, status=1/*>
>>    Main PID: 29193 (code=exited, status=1/FAILURE)
>>      Status: "Reading configuration..."
>>
>> Jul 01 14:12:39 donner systemd[1]: Starting The Apache Webserver...
>> Jul 01 14:12:39 donner start_apache2[29193]: AH00548:
>> NameVirtualHost has no effect and will be removed in t>
>> Jul 01 14:12:39 donner systemd[1]: *apache2.service: Main process
>> exited, code=exited, status=1/FAILURE*
>> Jul 01 14:12:39 donner systemd[1]: *apache2.service: Failed with
>> result 'exit-code'.*
>> Jul 01 14:12:39 donner systemd[1]: *Failed to start The Apache
>> Webserver.*
>>
>>
>>> On 30 Jun 2022, at 16:24, Frank Gingras <thumbs@apache.org
>>> <mailto:thumbs@apache.org>> wrote:
>>>
>>> That is one assumption, sure. Best to have the user run apachectl
>>> -S to confirm. For all we know, they could have defined invalid
>>> vhosts.
>>>
>>> On Thu, 30 Jun 2022 at 16:54, <freebsd@videotron.eu
>>> <mailto:freebsd@videotron.eu>> wrote:
>>>
>>> You are missing something called virtual hosts. You are
>>> allowed one host but you can have many virtual hosts.
>>> Secondly, you should be using Leap 15.4, it sounds like you
>>> are out of date, sorry to say.____
>>>
>>> __ __
>>>
>>> If you go to your httpd.conf file then you will notice that
>>> there is  a enable virtual hosts #include virtual hosts.conf
>>> httpd-vhosts.conf so uncomment it remove the #____
>>>
>>> __ __
>>>
>>> *De :* jnilles@jala.com <mailto:jnilles@jala.com>
>>> <jnilles@jala.com <mailto:jnilles@jala.com>>
>>> *Envoyé :* jeudi 30 juin 2022 16:28
>>> *À :* users@httpd.apache.org <mailto:users@httpd.apache.org>
>>> *Objet :* [users@httpd] NameVirtualHost fails____
>>>
>>> __ __
>>>
>>> I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL
>>> to  work on two hosts with the same IP address. My
>>> vhosts.config is set for the two hosts but only one actually
>>> runs. When I run systemctl status apache2.service  I get a
>>> message that NameVirtualHost has no effect and will be
>>> removed. So the configuration only works if I have just one
>>> host.____
>>>
>>> __ __
>>>
>>> What key detail am I missing in the network configuration?____
>>>
>>> __ __
>>>
>>> Thanks,____
>>>
>>> __ __
>>>
>>> Jack Nilles____
>>>
>>> __ __
>>>
>>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Lets encrypt is reliable from our point of view - never had an issue with it - we occasionally have issues when renewing certs - we have about 90 of them - but that is mainly with the "fake-manual" process of updating DNS which is not 100% reliable with the changes we make.

In use speed should be no different from any other cert - as long as you have the appropriate intermediates and your browser has the right root certs.

You can also create a cert with multiple SANs so you may only need one cert anyway.





--
The Wellcome Sanger Institute is operated by Genome Research
Limited, a charity registered in England with number 1021457 and a
company registered in England with number 2742969, whose registered
office is 215 Euston Road, London, NW1 2BE.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org

Paul,

Not sure how your example helps with the OP issue at all.

On Wed, 6 Jul 2022 at 06:40, Paul Kudla (SCOM.CA Internet Services Inc.) <
paul@scom.ca> wrote:

>
> this is how my ssl, vhosts, redirects are setup maybe this will help
>
> note any ssl website name MUST equal a valid certificate or you will get
> a cert mismatch error !!
>
> granted there are several cert authorities (free ssl etc) i have found
> its just easier to get a resale account (lots of providers opensrs,
> certigo, thwarte etc etc) and pay the 10.00 per cert.
>
> cert would be ok for www.xxx.com xnd xxx.com (aka you typically only
> need one certificate per site.)
>
> not pushing any provider, just saying letsencrypt etc does not always
> work reliabily or speed issues....
>
>
>
> <VirtualHost *:80>
> ServerName bedrockconstruction.ca
> ServerAlias bedrockconstruction.ca
> ServerAlias www.bedrockconstruction.ca
> Redirect permanent / https://bedrockconstruction.ca/
> </VirtualHost>
>
> <VirtualHost *:443>
> ServerName bedrockconstruction.ca
> ServerAlias bedrockconstruction.ca
> ServerAlias www.bedrockconstruction.ca
> DocumentRoot /www/bedrockconstruction.ca
>
> SSLEngine on
> SSLProtocol all
> SSLCertificateFile
> /www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.crt
> SSLCertificateKeyFile
> /www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.key
> SSLCertificateChainFile
> /www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.chain
>
>
> SuexecUserGroup www www
>
> <Directory "/www/bedrockconstruction.ca/wp-content/uploads/">
> <Files "*.php">
> Order Deny,Allow
> Deny from All
> </Files>
> </Directory>
>
> <Directory /www/bedrockconstruction.ca>
> php_admin_value open_basedir /www/bedrockconstruction.ca:/var/log/
> </Directory>
>
> <Directory /www/bedrockconstruction.ca>
> php_admin_value sys_temp_dir /www/bedrockconstruction.ca/tmp/
> </Directory>
>
> <Directory /www/bedrockconstruction.ca>
> php_admin_value session.save_path /www/bedrockconstruction.ca/tmp/
> </Directory>
>
> <Directory /www/bedrockconstruction.ca>
> php_admin_value soap.wsdl_cache_dir /www/bedrockconstruction.ca/tmp/
> </Directory>
>
> <Directory /www/bedrockconstruction.ca>
> php_admin_value upload_tmp_dir /www/bedrockconstruction.ca/tmp
> </Directory>
>
> <Directory "/www/bedrockconstruction.ca">
> AllowOverride All
> php_value session.save_path "/www/bedrockconstruction.ca/"
> </Directory>
>
> </VirtualHost>
>
>
>
> Happy Wednesday !!!
> Thanks - paul
>
> Paul Kudla
>
>
> Scom.ca Internet Services <http://www.scom.ca>
> 004-1009 Byron Street South
> Whitby, Ontario - Canada
> L1N 4S3
>
> Toronto 416.642.7266
> Main 1.866.411.7266
> Fax 1.888.892.7266
> Email paul@scom.ca
>
> On 7/5/2022 5:38 PM, scom.ca@httpd.apache.org wrote:
> > I've tried several variations but basically the error message is that
> > the certificate and the key for example2.com
> > <http://example2.com/> don't match. I thought I had set up the
> > certificate with the proper keys so something must be screwed up with
> > the certificate. I'm working on that.
> >
> > Jack
> >
> >> On 2 Jul 2022, at 1:21, Frank Gingras <thumbs@apache.org
> >> <mailto:thumbs@apache.org>> wrote:
> >>
> >> What does the error log say, exactly? Note that TLS failures can be
> >> almost silent in the logs, so if a single vhost causes the startup
> >> error, then check the certificate.
> >>
> >> On Fri, 1 Jul 2022 at 17:24, jnilles@jala.com
> >> <mailto:jnilles@jala.com> <jnilles@jala.com <mailto:jnilles@jala.com>>
> >> wrote:
> >>
> >> Here's an example version of my vhosts.conf file:
> >>
> >> # http redirect
> >> <VirtualHost *:80>
> >> ServerName central.com <http://central.com/>
> >> ServerAlias www.example1.com <http://www.example1.com/>
> >> *.example1.com <http://example1.com/>
> >> Redirect / https://www.example1.com/ <https://www.example1.com/>
> >> ErrorLog /var/log/apache2/example1.com
> >> <http://example1.com/>-error80_log
> >> CustomLog /var/log/apache2/example1.com
> >> <http://example1.com/>-access80_log combined
> >> </VirtualHost>
> >>
> >> <Virtualhost *:80>
> >> ServerName example2.com <http://example2.com/>
> >> ServerAlias www.example2.com <http://www.example2.com/>
> >> *.example2.com <http://example2.com/>
> >> Redirect / https://www.example2.com/ <https://www.example2.com/>
> >> ErrorLog /var/log/apache2/example2.com
> >> <http://example2.com/>-error80_log
> >> CustomLog /var/log/apache2/example2.com
> >> <http://example2.com/>-access80_log combined
> >> </VirtualHost>
> >>
> >> # https version
> >> <VirtualHost *:443>
> >> ServerAdmin webmaster@central.com <mailto:webmaster@central.com>
> >> ServerName example1.com <http://example1.com/>
> >> ServerAlias www.example1.com <http://www.example1.com/>
> >> *.example1.com <http://example1.com/>
> >> DocumentRoot "/home/data/hqwww/htdocs"
> >> SSLEngine on
> >> SSLProtocol all -SSLv2
> >> SSLCertificateFile /etc/apache2/ssl.crt/example.crt
> >> SSLCertificateKeyFile /etc/apache2/ssl.key/www.example1.com.key
> >> <http://www.example1.com.key/>
> >> SSLCertificateChainFile /etc/apache2/ssl.crt/example1.ca
> >> <http://example1.ca/>-bundle
> >> RewriteEngine On
> >> RewriteOptions Inherit
> >>
> >>
> >> <Directory "/home/data/example1/htdocs">
> >> AllowOverride None
> >> Options FollowSymlinks
> >> Require all granted
> >> </Directory>
> >>
> >>
> >> AccessFileName .htaccess
> >>
> >> ErrorLog /var/log/apache2/example1.com
> >> <http://example1.com/>-error_log
> >> CustomLog /var/log/apache2/example1.com
> >> <http://example1.com/>-access_log combined
> >>
> >>
> >> Include /etc/apache2/conf.d/*.conf
> >> </VirtualHost>
> >>
> >>
> >> <VirtualHost *:443>
> >> ServerAdmin webmaster@central.com <mailto:webmaster@central.com>
> >> ServerName example2.com <http://example2.com/>
> >> ServerAlias www.example2.com <http://www.example2.com/>
> >> *.example2.com <http://example2.com/>
> >> DocumentRoot "/home/data/jmnwww/htdocs"
> >> SSLEngine on
> >> SSLProtocol all -SSLv2
> >> SSLCertificateFile /etc/apache2/ssl.crt/example2.crt
> >> SSLCertificateKeyFile /etc/apache2/ssl.key/www.example2.com.key
> >> <http://www.example2.com.key/>
> >> SSLCertificateChainFile /etc/apache2/ssl.crt/example2.ca
> >> <http://example2.ca/>-bundle
> >> RewriteEngine On
> >> RewriteOptions Inherit
> >>
> >> <Directory "/home/data/example2/htdocs">
> >> ## To make the site work with pretty permalinks use the next 2
> >> uncommented lines.
> >> ## Otherwise use 'Options None' and 'AllowOverride None'
> >> AllowOverride all
> >> Options FollowSymlinks
> >> Require all granted
> >> </Directory>
> >>
> >> AccessFileName .htaccess
> >>
> >> ErrorLog /var/log/apache2/example2.com
> >> <http://example2.com/>-error_log
> >> CustomLog /var/log/apache2/example2.com
> >> <http://example2.com/>-access_log combined
> >>
> >> Include /etc/apache2/conf.d/*.conf
> >> </VirtualHost>
> >>
> >> If I drop the second host (example2), leaving just example1 it
> >> works; with both hosts apache crashes on restart. Here is the
> >> failure message output for that case.
> >>
> >> systemctl status apache2.service
> >> *?*apache2.service - The Apache Webserver
> >> Loaded: loaded (/usr/lib/systemd/system/apache2.service;
> >> enabled; vendor preset: disabled)
> >> Active: *failed*(Result: exit-code) since Fri 2022-07-01
> >> 14:12:39 PDT; 6min ago
> >> Process: 29193 ExecStart=/usr/sbin/start_apache2 -DSYSTEMD
> >> -DFOREGROUND -k start *(code=exited, status=1/*>
> >> Main PID: 29193 (code=exited, status=1/FAILURE)
> >> Status: "Reading configuration..."
> >>
> >> Jul 01 14:12:39 donner systemd[1]: Starting The Apache Webserver...
> >> Jul 01 14:12:39 donner start_apache2[29193]: AH00548:
> >> NameVirtualHost has no effect and will be removed in t>
> >> Jul 01 14:12:39 donner systemd[1]: *apache2.service: Main process
> >> exited, code=exited, status=1/FAILURE*
> >> Jul 01 14:12:39 donner systemd[1]: *apache2.service: Failed with
> >> result 'exit-code'.*
> >> Jul 01 14:12:39 donner systemd[1]: *Failed to start The Apache
> >> Webserver.*
> >>
> >>
> >>> On 30 Jun 2022, at 16:24, Frank Gingras <thumbs@apache.org
> >>> <mailto:thumbs@apache.org>> wrote:
> >>>
> >>> That is one assumption, sure. Best to have the user run apachectl
> >>> -S to confirm. For all we know, they could have defined invalid
> >>> vhosts.
> >>>
> >>> On Thu, 30 Jun 2022 at 16:54, <freebsd@videotron.eu
> >>> <mailto:freebsd@videotron.eu>> wrote:
> >>>
> >>> You are missing something called virtual hosts. You are
> >>> allowed one host but you can have many virtual hosts.
> >>> Secondly, you should be using Leap 15.4, it sounds like you
> >>> are out of date, sorry to say.____
> >>>
> >>> __ __
> >>>
> >>> If you go to your httpd.conf file then you will notice that
> >>> there is a enable virtual hosts #include virtual hosts.conf
> >>> httpd-vhosts.conf so uncomment it remove the #____
> >>>
> >>> __ __
> >>>
> >>> *De :* jnilles@jala.com <mailto:jnilles@jala.com>
> >>> <jnilles@jala.com <mailto:jnilles@jala.com>>
> >>> *Envoyé :* jeudi 30 juin 2022 16:28
> >>> *À :* users@httpd.apache.org <mailto:users@httpd.apache.org>
> >>> *Objet :* [users@httpd] NameVirtualHost fails____
> >>>
> >>> __ __
> >>>
> >>> I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL
> >>> to work on two hosts with the same IP address. My
> >>> vhosts.config is set for the two hosts but only one actually
> >>> runs. When I run systemctl status apache2.service I get a
> >>> message that NameVirtualHost has no effect and will be
> >>> removed. So the configuration only works if I have just one
> >>> host.____
> >>>
> >>> __ __
> >>>
> >>> What key detail am I missing in the network configuration?____
> >>>
> >>> __ __
> >>>
> >>> Thanks,____
> >>>
> >>> __ __
> >>>
> >>> Jack Nilles____
> >>>
> >>> __ __
> >>>
> >>
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and
> is
> > believed to be clean.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>

Yes, and that config is a good compendium of bad advice and deprecated
directives.

El mié, 6 jul 2022 14:28, Frank Gingras <thumbs@apache.org> escribió:

> Paul,
>
> Not sure how your example helps with the OP issue at all.
>
> On Wed, 6 Jul 2022 at 06:40, Paul Kudla (SCOM.CA Internet Services Inc.) <
> paul@scom.ca> wrote:
>
>>
>> this is how my ssl, vhosts, redirects are setup maybe this will help
>>
>> note any ssl website name MUST equal a valid certificate or you will get
>> a cert mismatch error !!
>>
>> granted there are several cert authorities (free ssl etc) i have found
>> its just easier to get a resale account (lots of providers opensrs,
>> certigo, thwarte etc etc) and pay the 10.00 per cert.
>>
>> cert would be ok for www.xxx.com xnd xxx.com (aka you typically only
>> need one certificate per site.)
>>
>> not pushing any provider, just saying letsencrypt etc does not always
>> work reliabily or speed issues....
>>
>>
>>
>> <VirtualHost *:80>
>> ServerName bedrockconstruction.ca
>> ServerAlias bedrockconstruction.ca
>> ServerAlias www.bedrockconstruction.ca
>> Redirect permanent / https://bedrockconstruction.ca/
>> </VirtualHost>
>>
>> <VirtualHost *:443>
>> ServerName bedrockconstruction.ca
>> ServerAlias bedrockconstruction.ca
>> ServerAlias www.bedrockconstruction.ca
>> DocumentRoot /www/bedrockconstruction.ca
>>
>> SSLEngine on
>> SSLProtocol all
>> SSLCertificateFile
>> /www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.crt
>> SSLCertificateKeyFile
>> /www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.key
>> SSLCertificateChainFile
>> /www/bedrockconstruction.ca/ssl/bedrockconstruction.ca.chain
>>
>>
>> SuexecUserGroup www www
>>
>> <Directory "/www/bedrockconstruction.ca/wp-content/uploads/">
>> <Files "*.php">
>> Order Deny,Allow
>> Deny from All
>> </Files>
>> </Directory>
>>
>> <Directory /www/bedrockconstruction.ca>
>> php_admin_value open_basedir /www/bedrockconstruction.ca:/var/log/
>> </Directory>
>>
>> <Directory /www/bedrockconstruction.ca>
>> php_admin_value sys_temp_dir /www/bedrockconstruction.ca/tmp/
>> </Directory>
>>
>> <Directory /www/bedrockconstruction.ca>
>> php_admin_value session.save_path /www/bedrockconstruction.ca/tmp/
>> </Directory>
>>
>> <Directory /www/bedrockconstruction.ca>
>> php_admin_value soap.wsdl_cache_dir /www/bedrockconstruction.ca/tmp/
>> </Directory>
>>
>> <Directory /www/bedrockconstruction.ca>
>> php_admin_value upload_tmp_dir /www/bedrockconstruction.ca/tmp
>> </Directory>
>>
>> <Directory "/www/bedrockconstruction.ca">
>> AllowOverride All
>> php_value session.save_path "/www/bedrockconstruction.ca/"
>> </Directory>
>>
>> </VirtualHost>
>>
>>
>>
>> Happy Wednesday !!!
>> Thanks - paul
>>
>> Paul Kudla
>>
>>
>> Scom.ca Internet Services <http://www.scom.ca>
>> 004-1009 Byron Street South
>> Whitby, Ontario - Canada
>> L1N 4S3
>>
>> Toronto 416.642.7266
>> Main 1.866.411.7266
>> Fax 1.888.892.7266
>> Email paul@scom.ca
>>
>> On 7/5/2022 5:38 PM, scom.ca@httpd.apache.org wrote:
>> > I've tried several variations but basically the error message is that
>> > the certificate and the key for example2.com
>> > <http://example2.com/> don't match. I thought I had set up the
>> > certificate with the proper keys so something must be screwed up with
>> > the certificate. I'm working on that.
>> >
>> > Jack
>> >
>> >> On 2 Jul 2022, at 1:21, Frank Gingras <thumbs@apache.org
>> >> <mailto:thumbs@apache.org>> wrote:
>> >>
>> >> What does the error log say, exactly? Note that TLS failures can be
>> >> almost silent in the logs, so if a single vhost causes the startup
>> >> error, then check the certificate.
>> >>
>> >> On Fri, 1 Jul 2022 at 17:24, jnilles@jala.com
>> >> <mailto:jnilles@jala.com> <jnilles@jala.com <mailto:jnilles@jala.com>>
>>
>> >> wrote:
>> >>
>> >> Here's an example version of my vhosts.conf file:
>> >>
>> >> # http redirect
>> >> <VirtualHost *:80>
>> >> ServerName central.com <http://central.com/>
>> >> ServerAlias www.example1.com <http://www.example1.com/>
>> >> *.example1.com <http://example1.com/>
>> >> Redirect / https://www.example1.com/ <https://www.example1.com/>
>> >> ErrorLog /var/log/apache2/example1.com
>> >> <http://example1.com/>-error80_log
>> >> CustomLog /var/log/apache2/example1.com
>> >> <http://example1.com/>-access80_log combined
>> >> </VirtualHost>
>> >>
>> >> <Virtualhost *:80>
>> >> ServerName example2.com <http://example2.com/>
>> >> ServerAlias www.example2.com <http://www.example2.com/>
>> >> *.example2.com <http://example2.com/>
>> >> Redirect / https://www.example2.com/ <https://www.example2.com/>
>> >> ErrorLog /var/log/apache2/example2.com
>> >> <http://example2.com/>-error80_log
>> >> CustomLog /var/log/apache2/example2.com
>> >> <http://example2.com/>-access80_log combined
>> >> </VirtualHost>
>> >>
>> >> # https version
>> >> <VirtualHost *:443>
>> >> ServerAdmin webmaster@central.com <mailto:webmaster@central.com>
>> >> ServerName example1.com <http://example1.com/>
>> >> ServerAlias www.example1.com <http://www.example1.com/>
>> >> *.example1.com <http://example1.com/>
>> >> DocumentRoot "/home/data/hqwww/htdocs"
>> >> SSLEngine on
>> >> SSLProtocol all -SSLv2
>> >> SSLCertificateFile /etc/apache2/ssl.crt/example.crt
>> >> SSLCertificateKeyFile /etc/apache2/ssl.key/www.example1.com.key
>> >> <http://www.example1.com.key/>
>> >> SSLCertificateChainFile /etc/apache2/ssl.crt/example1.ca
>> >> <http://example1.ca/>-bundle
>> >> RewriteEngine On
>> >> RewriteOptions Inherit
>> >>
>> >>
>> >> <Directory "/home/data/example1/htdocs">
>> >> AllowOverride None
>> >> Options FollowSymlinks
>> >> Require all granted
>> >> </Directory>
>> >>
>> >>
>> >> AccessFileName .htaccess
>> >>
>> >> ErrorLog /var/log/apache2/example1.com
>> >> <http://example1.com/>-error_log
>> >> CustomLog /var/log/apache2/example1.com
>> >> <http://example1.com/>-access_log combined
>> >>
>> >>
>> >> Include /etc/apache2/conf.d/*.conf
>> >> </VirtualHost>
>> >>
>> >>
>> >> <VirtualHost *:443>
>> >> ServerAdmin webmaster@central.com <mailto:webmaster@central.com>
>> >> ServerName example2.com <http://example2.com/>
>> >> ServerAlias www.example2.com <http://www.example2.com/>
>> >> *.example2.com <http://example2.com/>
>> >> DocumentRoot "/home/data/jmnwww/htdocs"
>> >> SSLEngine on
>> >> SSLProtocol all -SSLv2
>> >> SSLCertificateFile /etc/apache2/ssl.crt/example2.crt
>> >> SSLCertificateKeyFile /etc/apache2/ssl.key/www.example2.com.key
>> >> <http://www.example2.com.key/>
>> >> SSLCertificateChainFile /etc/apache2/ssl.crt/example2.ca
>> >> <http://example2.ca/>-bundle
>> >> RewriteEngine On
>> >> RewriteOptions Inherit
>> >>
>> >> <Directory "/home/data/example2/htdocs">
>> >> ## To make the site work with pretty permalinks use the next 2
>> >> uncommented lines.
>> >> ## Otherwise use 'Options None' and 'AllowOverride None'
>> >> AllowOverride all
>> >> Options FollowSymlinks
>> >> Require all granted
>> >> </Directory>
>> >>
>> >> AccessFileName .htaccess
>> >>
>> >> ErrorLog /var/log/apache2/example2.com
>> >> <http://example2.com/>-error_log
>> >> CustomLog /var/log/apache2/example2.com
>> >> <http://example2.com/>-access_log combined
>> >>
>> >> Include /etc/apache2/conf.d/*.conf
>> >> </VirtualHost>
>> >>
>> >> If I drop the second host (example2), leaving just example1 it
>> >> works; with both hosts apache crashes on restart. Here is the
>> >> failure message output for that case.
>> >>
>> >> systemctl status apache2.service
>> >> *?*apache2.service - The Apache Webserver
>> >> Loaded: loaded (/usr/lib/systemd/system/apache2.service;
>> >> enabled; vendor preset: disabled)
>> >> Active: *failed*(Result: exit-code) since Fri 2022-07-01
>> >> 14:12:39 PDT; 6min ago
>> >> Process: 29193 ExecStart=/usr/sbin/start_apache2 -DSYSTEMD
>> >> -DFOREGROUND -k start *(code=exited, status=1/*>
>> >> Main PID: 29193 (code=exited, status=1/FAILURE)
>> >> Status: "Reading configuration..."
>> >>
>> >> Jul 01 14:12:39 donner systemd[1]: Starting The Apache Webserver...
>> >> Jul 01 14:12:39 donner start_apache2[29193]: AH00548:
>> >> NameVirtualHost has no effect and will be removed in t>
>> >> Jul 01 14:12:39 donner systemd[1]: *apache2.service: Main process
>> >> exited, code=exited, status=1/FAILURE*
>> >> Jul 01 14:12:39 donner systemd[1]: *apache2.service: Failed with
>> >> result 'exit-code'.*
>> >> Jul 01 14:12:39 donner systemd[1]: *Failed to start The Apache
>> >> Webserver.*
>> >>
>> >>
>> >>> On 30 Jun 2022, at 16:24, Frank Gingras <thumbs@apache.org
>> >>> <mailto:thumbs@apache.org>> wrote:
>> >>>
>> >>> That is one assumption, sure. Best to have the user run apachectl
>> >>> -S to confirm. For all we know, they could have defined invalid
>> >>> vhosts.
>> >>>
>> >>> On Thu, 30 Jun 2022 at 16:54, <freebsd@videotron.eu
>> >>> <mailto:freebsd@videotron.eu>> wrote:
>> >>>
>> >>> You are missing something called virtual hosts. You are
>> >>> allowed one host but you can have many virtual hosts.
>> >>> Secondly, you should be using Leap 15.4, it sounds like you
>> >>> are out of date, sorry to say.____
>> >>>
>> >>> __ __
>> >>>
>> >>> If you go to your httpd.conf file then you will notice that
>> >>> there is a enable virtual hosts #include virtual hosts.conf
>> >>> httpd-vhosts.conf so uncomment it remove the #____
>> >>>
>> >>> __ __
>> >>>
>> >>> *De :* jnilles@jala.com <mailto:jnilles@jala.com>
>> >>> <jnilles@jala.com <mailto:jnilles@jala.com>>
>> >>> *Envoyé :* jeudi 30 juin 2022 16:28
>> >>> *À :* users@httpd.apache.org <mailto:users@httpd.apache.org>
>> >>> *Objet :* [users@httpd] NameVirtualHost fails____
>> >>>
>> >>> __ __
>> >>>
>> >>> I'm using SUSE Leap 15.3 and apache2. I'm trying to get SSL
>> >>> to work on two hosts with the same IP address. My
>> >>> vhosts.config is set for the two hosts but only one actually
>> >>> runs. When I run systemctl status apache2.service I get a
>> >>> message that NameVirtualHost has no effect and will be
>> >>> removed. So the configuration only works if I have just one
>> >>> host.____
>> >>>
>> >>> __ __
>> >>>
>> >>> What key detail am I missing in the network configuration?____
>> >>>
>> >>> __ __
>> >>>
>> >>> Thanks,____
>> >>>
>> >>> __ __
>> >>>
>> >>> Jack Nilles____
>> >>>
>> >>> __ __
>> >>>
>> >>
>> >
>> >
>> > --
>> > This message has been scanned for viruses and
>> > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and
>> is
>> > believed to be clean.
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>>